[31-08-20] UMTv2 / UMTPro - QcFire v6.0 - Xiaomi Free Auth Service for many models...

[mhodkaif]

AGAIN BAAP BAAP HI HOTA HAI

POCO F1 MI ACCOUNT DONE

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00800 [SDM845] 00007200
OPK_DATA : 99AF649E077EBCE3E9E187442ABDC70BD715756DE9ED192E9F 7883A10EBE09F4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM845]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Requesting UMT Auth Service (FREE)...OK
Detecting Chip Type...OK
Hardware : SDM845, UFS, 128 GB
LU Count : 6 [0x01CA5800] [0x00000800] [0x00000800] [0x00002000] [0x00120000] [0x00002000]
Payload Info : In: 262144 [65536], Out: 262144, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi POCO F1 [beryllium]
Brand : Xiaomi
Prod.Name : beryllium
Software : PKQ1.180729.001, V10.3.7.0.PEJMIXM [Fri Aug 9 19:16:04 WIB 2019]
Android Ver. : 9
Patch Level : 2019-07-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------

[ayat1978]

Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Requesting UMT Auth Service (FREE)...Failed
Error Log : PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID 8+CjxkYXRhPgo8bG9nIHZhbHVlPSJTaWduYXR1cmUgVmVyaWZp Y2F0aW9uIEZhaWxlZCIvPgo8L2RhdGE+PD94bWwgdmVyc2lvbj 0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID8+CjxkYXRhPgo8cmVz cG9uc2UgdmFsdWU9Ik5BSyIgLz4KPC9kYXRhPn==
Reading Auth Blob...Not Found!
DebugData : BAAAABAAAAANAAAAAQAAAA==
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.0

[y_info2004]

Device : Xiaomi BlackShark 1
Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM169)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Requesting UMT Auth Service (FREE)...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi MI MAX 2 [msm8953] [oxygen]
Brand : Xiaomi
Prod.Name : oxygen
Software : NMF26F, V10.3.1.0.NDDMIXM [Thu Jun 13 20:59:18 CST 2019]
Android Ver. : 7.1.1
Patch Level : 2019-03-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.


THANKS UMT

[Yusuf Lawal]

https://ibb.co/gFfX6yn

Operation : Xiaomi Boot Patch
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Invalid response from device!
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1A00B00 [8953] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_027]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : BAAAABAAAAANAAAAAQAAAA==
Using Alternate Method...
DebugData : BAAAABAAAAANAAAAAQAAAA==
Error getting Payload Information!
Error Log : BAAAABAAAAANAAAAAQAAAA==
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.0

[frawudo]

Please add in the next update redmi 6 redmi 6a in ultimate mtk module it would be a great update thanks team, keep going. The best UMT equipment.

[basharat7]

team yesterday i unlocked 8a dual mi ac its getting relock again and again i used anti relock i used disable mi ac same it comes back on mi ac unlock help

[muksforu]

hi good update

here is log of redmi note 7 pro MI account disable ok but wifi not working and when i format fs handset working ok but again mi activation lock i do

1-Reset Account (STUCK ON LOGO)
2-flash handset
3-reset account
4-format fs (handset switch on ok)
5-Anti Relock
after connecting internet same with sim again mi account comes

now accept wifi bt all woking ok how to solve wifi bt and relock issue ( if i format fs wifi bt woking ok but after connecting to wifi handet again lock to mi account)

any solution

thanks

Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1500900 [SM6150] 00007200
OPK_DATA	: 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Requesting UMT Auth Service (FREE)...OK
Detecting Chip Type...OK
Hardware	: SM6150, eMMC, 128 GB
LU Count	: 1 [0x0E8F6000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [65536], Out: 262144, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 7 Pro [violet]
Brand	: xiaomi
Prod.Name	: violet
Software	: PKQ1.181203.001, V11.0.6.0.PFHINXM [Thu Dec 19 23:58:09 CST 2019]
Android Ver.	: 9
Patch Level	: 2019-12-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 6.0

[globaltelecom]

one of the fineaset dongal i ever i seen great job sir

[globaltelecom]

Please add in the next update redmi 6 redmi 6a in ultimate mtk module it would be a great update thanks team

[du10086]

umt Good Update from Big Team
Can you add more VIVO and OPPO and Huawei models

[poojadooj]

nice update thanks big update boom boom

[U.M.T]

Originally Posted by Yusuf Lawal

https://ibb.co/gFfX6yn

Operation : Xiaomi Boot Patch
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Invalid response from device!
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1A00B00 [8953] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_027]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : BAAAABAAAAANAAAAAQAAAA==
Using Alternate Method...
DebugData : BAAAABAAAAANAAAAAQAAAA==
Error getting Payload Information!
Error Log : BAAAABAAAAANAAAAAQAAAA==
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.0

Communication issue.

Br,
UMT

[U.M.T]

Originally Posted by basharat7

team yesterday i unlocked 8a dual mi ac its getting relock again and again i used anti relock i used disable mi ac same it comes back on mi ac unlock help

Originally Posted by muksforu

hi good update

here is log of redmi note 7 pro MI account disable ok but wifi not working and when i format fs handset working ok but again mi activation lock i do

1-Reset Account (STUCK ON LOGO)
2-flash handset
3-reset account
4-format fs (handset switch on ok)
5-Anti Relock
after connecting internet same with sim again mi account comes

now accept wifi bt all woking ok how to solve wifi bt and relock issue ( if i format fs wifi bt woking ok but after connecting to wifi handet again lock to mi account)

any solution

thanks

Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1500900 [SM6150] 00007200
OPK_DATA	: 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Requesting UMT Auth Service (FREE)...OK
Detecting Chip Type...OK
Hardware	: SM6150, eMMC, 128 GB
LU Count	: 1 [0x0E8F6000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [65536], Out: 262144, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 7 Pro [violet]
Brand	: xiaomi
Prod.Name	: violet
Software	: PKQ1.181203.001, V11.0.6.0.PFHINXM [Thu Dec 19 23:58:09 CST 2019]
Android Ver.	: 9
Patch Level	: 2019-12-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 6.0

Possibly device in lost mode.

Need BL unlock amd write custom ROM.

Br,
UMT

[raj_333]

Originally Posted by fast unlocking

we are pleased to announce
umtv2 / umt pro
innovative and intelligent

qcfire v6.0
the ultimate qualcomm tool


supported functions
- read / write firmware
- backup / restore qcn
- imei repair in ftm/diag + flash mode
- backup / reset / restore security (efs)
- reset frp (google factory reset protection)
- format userdata
- read pattern lock (android < 6.0, un-encrypted devices only)
- reset locks (pin, password, pattern w/o data loss, un-encrypted devices only)
- enable diag (need oem unlock, may not work on bl locked devices)
- reboot to edl from fastboot
- reset mi account for xiaomi devices
- disable mi account for xiaomi devices
- factory reset (sideload mode) for xiaomi devices
- disable / restore locks for encrypted userdata
- motorola boot repair
- xiaomi edl locked device service
- bootloader unlock in edl mode for some xiaomi devices
- one click root in edl mode for generic qualcomm devices
- forensic functions (read contacts / messages in edl mode)
- one click lock reset for vivo phones (encrypted userdata)
- factory method for format fs
- edl authentication using xiaomi auth app (service account required)
- xiaomi wipe efs in sideload mode
- xiaomi imei repair for rsa protected phones
- xiaomi boot loader unlock
- unique method for vivo reset locks for protected devices
- xiaomi edl auth using umt server
- xiaomi flashing in fastboot mode
- nokia factory firmware (nb0) direct flashing in edl mode
- oppo ofp firmware exctration added
- xiaomi free auth service - new!!!


note : Some features are device/brand specific, may not work on all devices.



added

tecno
- a88

zte
- nubia red magic 5g


xiaomi no auth/free auth service added (beta)

- mi a3
- poco f1
- redmi 6 pro
- redmi 7a
- redmi 8
- redmi 8a
- redmi 8a dual
- redmi 8a pro
- redmi note 7 pro

added free auth service
- if phone ask for edl auth, software will first try with free service
- if free service does not work, it will ask for auth server as usual

xiaomi fb flasher
- disabled crclist flashing by default to avoid crc check error on some devices
- you can tick mark crclist and sparsecrclist if you want to flash
- added select all and unselect all button




special thanks to:
- amjadnona
- technomak




it has begun...
keep following us...
some nice updates are on the way...


special thanks to our valuable users for their love and support for more than 4 years




warning :
esn / meid / imei repair is intended to repair esn / meid / imei to original one written on phone back label / box. We do not endorse or encourage esn / meid / imei changing. Its illegal. User is sole responsible for any illegal activity done with use of features provided in our software, not limited to esn / meid / imei.


any user using our software for illegal purpose will be sole responsible for his acts.

we condemn use of our software for any illegal purpose.



statutory warning - read carefully
using international edition of our software is prohibited by indian law.
We strictly advice you to use indian edition if you are in india.
If you use international edition in india, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



:: No fake advertisement ::
:: No fake updates ::
:: No fake world's first ::
:: No fake bla bla bla ::



how to download:
- download umt support access.
- connect umt box/dongle to pc and run umt support access.
- download required executable from installer folder.
- enjoy!
- download mirrors



please do not post off topic here. Only post regarding this update and supported models. Any off topic post will be deleted

thank u for this update, plz add redmi note 8 bootloader unlock

[muksforu]

Originally Posted by U.M.T

Possibly device in lost mode.

Need BL unlock amd write custom ROM.

Br,
UMT

ok thanks will try and post result