motorola frp which mode connect ?

[SAN INFOTECH]

motorola frp which mode connect ?

Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Not Found!
Operation Failed.
Elapsed Time: 00:02
[Module Ver. 4.2]
Log Saved to Logs\171030_193207.log

[srmmobiles]

Originally Posted by SAN INFOTECH

motorola frp which mode connect ?

Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Not Found!
Operation Failed.
Elapsed Time: 00:02
[Module Ver. 4.2]
Log Saved to Logs\171030_193207.log

swictch off and insert battery, and usb....bro

[SAN INFOTECH]

Originally Posted by srmmobiles

swictch off and insert battery, and usb....bro

its qualcomm cpu

br
san infotech

[srmmobiles]

Originally Posted by SAN INFOTECH

its qualcomm cpu

br
san infotech

Motorola Qualcomm
You can Unlock SIMLOCK, repair IMEI and flash your phone in fastboot mode from here.

Reset FRP for Almost All Motorola
- Turn Off phone, hold Volume Down and press power button for 2 seconds, keep Volume Down pressed.
- Phone will enter Fastboot Mode. Select use Volume Down to select Factory and press Volume Up.
- Connect Phone to PC and install Drivers.
- Now click on Enable ADB.
- Turn off phone, and again put in Factory Mode by same method as above.
- Now click on Reset FRP.
- Check phone screen for ADB Authorization and Accept if needed.

Repairing Motorola IMEI
- Turn Off phone, hold Volume Down and press power button for 2 seconds, keep Volume Down pressed.
- Phone will enter Fastboot Mode. Select use Volume Down to select BP Tools and press Volume Up.
- Connect Phone to PC and install Drivers.
- Select Diagnostic Port, enter desired IMEI and press Repair.

Unlocking Phone
- Turn Off phone, hold Volume Down and press power button for 2 seconds, keep Volume Down pressed.
- Phone will enter Fastboot Mode. Select use Volume Down to select BP Tools and press Volume Up.
- Connect Phone to PC and install Drivers.
- Select Diagnostic Port and press Unlock.

Note : If you get Unsupported Firmware Error, use Miscellaneous > Downgrade Baseband (Fastboot) option and select Downgraded Modem File.

Flashing Motorola Phones
- Turn Off phone, hold Volume Down and press power button for 2 seconds, keep Volume Down pressed.
- Phone will enter Fastboot Mode. Browse for Motorola Firmware XML file. Select servicefile/flashfile.
- Select which Partitions you want to flash, ie if you need to flash only Recovery, then tick only recovery.
- Check Select All to tick all files, Fix Baseband for only files needed for Baseband repair. Click on Flash.

Creating Flashing Script
- Load firmware.
- Select partitions you want to be in Script.
- Tick Reboot if you want Script to reboot your phone when flashing finished.
- Now click on Create Script. It will make CMD script and save in Firmware folder with required files (adb.exe, fastboot.exe etc).

LOOK THE LEFT SIDE UPPER COLUM LOG \ HELP TABS CLICK THE HELP TAB YOU GET CONNECT METHDES