GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Ultimate Multi Tool Box

Ultimate Multi Tool Box Multi GSM & CDMA Box

Reply
 
LinkBack Thread Tools Display Modes
Old 09-29-2019, 06:37   #7711 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Talking Redmi Note 5A MI ACC+FRP


Code:
Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1B00600 [8937] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, eMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5A [msm8937] [ugg]
Software	: N2G47H, V10.2.1.0.NDKMIXM [Fri Jan 18 23:33:36 WIB 2019]
Android Ver.	: 7.1.2
Patch Level	: 2018-12-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.7

Code:
Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1B00600 [8937] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, eMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5A [msm8937] [ugg]
Software	: N2G47H, V10.2.1.0.NDKMIXM [Fri Jan 18 23:33:36 WIB 2019]
Android Ver.	: 7.1.2
Patch Level	: 2018-12-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 09-29-2019, 06:38   #7712 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
OPPO F1f PINLOCK

Code:
Operation	: Format FS
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1B09000 [8936] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8936_036]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8936, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: OPPO F1f [msm8916] [F1f]
Software	: F1EX_11_190307, 1481118911 [Thu Mar  7 15:44:33 CST 2019]
Android Ver.	: 5.1.1
Patch Level	: 2017-12-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 09-29-2019, 06:39   #7713 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
vivo 1603 PINLOCK

Code:
Operation	: Format FS
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1F00400 [8937] 00000000
OPK_DATA	: 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: vivo vivo 1603 [msm8937] [PD1613F_EX]
Software	: MMB29M release-keys, eng.compiler.20190306.175921 [Wed Mar  6 18:03:45 CST 2019]
Android Ver.	: 6.0.1
Patch Level	: 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 09-29-2019, 06:46   #7714 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Redmi 5 MI ACC+FRP

Code:
Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1A00900 [8953] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, eMMC, 16 GB
LU Count	: 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi 5 [msm8953] [rosy]
Software	: N2G47H, V9.2.3.0.NDAMIEK [Mon Jan 15 23:24:28 WIB 2018]
Android Ver.	: 7.1.2
Patch Level	: 2018-01-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.7

Code:
Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1A00900 [8953] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, eMMC, 16 GB
LU Count	: 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi 5 [msm8953] [rosy]
Software	: N2G47H, V9.2.3.0.NDAMIEK [Mon Jan 15 23:24:28 WIB 2018]
Android Ver.	: 7.1.2
Patch Level	: 2018-01-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 09-29-2019, 06:48   #7715 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Talking Redmi Note 5 Pro Acc+Frp

Code:
Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1C00C00 [8996] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: MSM8996, eMMC, 64 GB
LU Count	: 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5 [whyred]
Software	: PKQ1.180904.001, V10.3.2.0.PEIMIXM [Thu Aug  8 17:14:58 WIB 2019]
Android Ver.	: 9
Patch Level	: 2019-08-05
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.7
Code:
Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1C00C00 [8996] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: MSM8996, eMMC, 64 GB
LU Count	: 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5 [whyred]
Software	: PKQ1.180904.001, V10.3.2.0.PEIMIXM [Thu Aug  8 17:14:58 WIB 2019]
Android Ver.	: 9
Patch Level	: 2019-08-05
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.7
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 09-29-2019, 06:49   #7716 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Xiaomi Mi A1 FRP

Code:
Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1600400 [8953] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, eMMC, 64 GB
LU Count	: 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Mi A1 [tissot_sprout]
Software	: PKQ1.180917.001.V10.0.4.0.PDHMIXM, V10.0.4.0.PDHMIXM [Fri Jan  4 17:39:28 WIB 2019]
Android Ver.	: 9
Patch Level	: 2019-01-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 09-29-2019, 08:49   #7717 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: Kotla Arab Ali Khan(PAK)
Posts: 635
Member: 2016954
Status: Offline
Thanks Meter: 345
TURBO-X (A2) FrP done Selcted by Accent C6

Brand : Accent
Model : Cameleon C6
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM471)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : TURBO-X
Manufacturer : TURBO-X
Model : A2
Prod. Name : A2
Device : A2
Platform : mt6580
Android Ver. : 5.1
Display ID : LMY47I release-keys
Patch Level : 2015-12-01
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.3]
  Reply With Quote
The Following 2 Users Say Thank You to GsmKotla For This Useful Post:
Old 09-29-2019, 13:32   #7718 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: Kotla Arab Ali Khan(PAK)
Posts: 635
Member: 2016954
Status: Offline
Thanks Meter: 345
Lenovo A3300GV Flash done

CPU : MT6582
Storage : EMMC
Scatter : C:\Users\Malik\Downloads\Compressed\Lenovo_A3300GV _MT6582_01_43_140826\Lenovo_A3300GV_MT6582_01_43_1 40826\Firmware\MT6582_Android_scatter.txt
DA Version : MTK_AllInOne_DA_v3.3001.2017-12-29.16:29
Waiting for Phone in BROM Mode...
Connect Power Off phone now...
Port : MediaTek PreLoader USB VCOM (Android) (COM471)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
Hardware : MT6582
Flashing Bootloader...
Flashing Firmware...
Flashing Done.
Disconnect cable and Power ON phone.
  Reply With Quote
The Following 2 Users Say Thank You to GsmKotla For This Useful Post:
Old 09-29-2019, 13:36   #7719 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: Kotla Arab Ali Khan(PAK)
Posts: 635
Member: 2016954
Status: Offline
Thanks Meter: 345
G531H FRP Reset done

Model : G531H
Operation : FRP Reset (Format UD)
Searching for Phone...Found
Port: : COM64 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : SPRD8735 [HiSpeed]
Loading Data...Done
Sending Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:15
Module Ver. 0.2
LOG Saved to !Logs\190929_173516.log
  Reply With Quote
The Following 2 Users Say Thank You to GsmKotla For This Useful Post:
Old 09-30-2019, 07:28   #7720 (permalink)
Freak Poster
 
Join Date: Sep 2014
Location: philippines
Posts: 205
Member: 2256970
Status: Offline
Thanks Meter: 67
Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47 647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 4.8
  Reply With Quote
The Following User Says Thank You to Naps For This Useful Post:
Old 09-30-2019, 07:28   #7721 (permalink)
Freak Poster
 
Join Date: Sep 2014
Location: philippines
Posts: 205
Member: 2256970
Status: Offline
Thanks Meter: 67
Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47 647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 4.8
  Reply With Quote
The Following 2 Users Say Thank You to Naps For This Useful Post:
Old 09-30-2019, 10:15   #7722 (permalink)
Insane Poster
 
Join Date: Feb 2019
Location: India
Posts: 99
Member: 2892864
Status: Offline
Thanks Meter: 74
Donate money to this user
Cool itel A22 frp reset done

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : itel itel A22 [itel-A22]
Software : V033, A22-F0901-8.1.0-IN-V033-20180925 [Tue Sep 25 11:58:32 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-08-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.8
  Reply With Quote
The Following 2 Users Say Thank You to sk solution For This Useful Post:
Old 09-30-2019, 10:18   #7723 (permalink)
Insane Poster
 
Join Date: Feb 2019
Location: India
Posts: 99
Member: 2892864
Status: Offline
Thanks Meter: 74
Donate money to this user
Cool Lenovo A6020a40 Flash done

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B09100 [8929] 01000100
OPK_DATA : 5F5DBD11259E7F99680B3D60E74EC73BDD5387694EA6D96CBF 808A68A7369E82
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8929]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8929, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [S82918I1_Online_V011.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [system_31.img] -> [system] ...Done
Writing [system_32.img] -> [system] ...Done
Writing [system_33.img] -> [system] ...Done
Writing [system_34.img] -> [system] ...Done
Writing [system_35.img] -> [system] ...Done
Writing [system_36.img] -> [system] ...Done
Writing [system_37.img] -> [system] ...Done
Writing [system_38.img] -> [system] ...Done
Writing [system_39.img] -> [system] ...Done
Writing [system_40.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [cache_4.img] -> [cache] ...Done
Writing [cache_5.img] -> [cache] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [userdata_22.img] -> [userdata] ...Done
Writing [userdata_23.img] -> [userdata] ...Done
Writing [userdata_24.img] -> [userdata] ...Done
Writing [userdata_25.img] -> [userdata] ...Done
Writing [userdata_26.img] -> [userdata] ...Done
Writing [userdata_27.img] -> [userdata] ...Done
Writing [userdata_28.img] -> [userdata] ...Done
Writing [userdata_29.img] -> [userdata] ...Done
Writing [userdata_30.img] -> [userdata] ...Done
Writing [userdata_31.img] -> [userdata] ...Done
Writing [userdata_32.img] -> [userdata] ...Done
Writing [userdata_33.img] -> [userdata] ...Done
Writing [userdata_34.img] -> [userdata] ...Done
Writing [userdata_35.img] -> [userdata] ...Done
Writing [userdata_36.img] -> [userdata] ...Done
Writing [userdata_37.img] -> [userdata] ...Done
Writing [userdata_38.img] -> [userdata] ...Done
Writing [userdata_39.img] -> [userdata] ...Done
Writing [userdata_40.img] -> [userdata] ...Done
Writing [userdata_41.img] -> [userdata] ...Done
Writing [userdata_42.img] -> [userdata] ...Done
Writing [userdata_43.img] -> [userdata] ...Done
Writing [userdata_44.img] -> [userdata] ...Done
Writing [userdata_45.img] -> [userdata] ...Done
Writing [userdata_46.img] -> [userdata] ...Done
Writing [userdata_47.img] -> [userdata] ...Done
Writing [userdata_48.img] -> [userdata] ...Done
Writing [userdata_49.img] -> [userdata] ...Done
Writing [userdata_50.img] -> [userdata] ...Done
Writing [userdata_51.img] -> [userdata] ...Done
Writing [userdata_52.img] -> [userdata] ...Done
Writing [userdata_53.img] -> [userdata] ...Done
Writing [userdata_54.img] -> [userdata] ...Done
Writing [userdata_55.img] -> [userdata] ...Done
Writing [userdata_56.img] -> [userdata] ...Done
Writing [userdata_57.img] -> [userdata] ...Done
Writing [userdata_58.img] -> [userdata] ...Done
Writing [userdata_59.img] -> [userdata] ...Done
Writing [userdata_60.img] -> [userdata] ...Done
Writing [userdata_61.img] -> [userdata] ...Done
Writing [userdata_62.img] -> [userdata] ...Done
Writing [userdata_63.img] -> [userdata] ...Done
Writing [userdata_64.img] -> [userdata] ...Done
Writing [userdata_65.img] -> [userdata] ...Done
Writing [userdata_66.img] -> [userdata] ...Done
Writing [userdata_67.img] -> [userdata] ...Done
Writing [userdata_68.img] -> [userdata] ...Done
Writing [userdata_69.img] -> [userdata] ...Done
Writing [userdata_70.img] -> [userdata] ...Done
Writing [userdata_71.img] -> [userdata] ...Done
Writing [userdata_72.img] -> [userdata] ...Done
Writing [userdata_73.img] -> [userdata] ...Done
Writing [userdata_74.img] -> [userdata] ...Done
Writing [userdata_75.img] -> [userdata] ...Done
Writing [userdata_76.img] -> [userdata] ...Done
Writing [userdata_77.img] -> [userdata] ...Done
Writing [userdata_78.img] -> [userdata] ...Done
Writing [userdata_79.img] -> [userdata] ...Done
Writing [userdata_80.img] -> [userdata] ...Done
Writing [userdata_81.img] -> [userdata] ...Done
Writing [userdata_82.img] -> [userdata] ...Done
Writing [userdata_83.img] -> [userdata] ...Done
Writing [userdata_84.img] -> [userdata] ...Done
Writing [userdata_85.img] -> [userdata] ...Done
Writing [userdata_86.img] -> [userdata] ...Done
Writing [userdata_87.img] -> [userdata] ...Done
Writing [userdata_88.img] -> [userdata] ...Done
Writing [userdata_89.img] -> [userdata] ...Done
Writing [userdata_90.img] -> [userdata] ...Done
Writing [userdata_91.img] -> [userdata] ...Done
Writing [userdata_92.img] -> [userdata] ...Done
Writing [userdata_93.img] -> [userdata] ...Done
Writing [userdata_94.img] -> [userdata] ...Done
Writing [userdata_95.img] -> [userdata] ...Done
Writing [userdata_96.img] -> [userdata] ...Done
Writing [userdata_97.img] -> [userdata] ...Done
Writing [userdata_98.img] -> [userdata] ...Done
Writing [userdata_99.img] -> [userdata] ...Done
Writing [userdata_100.img] -> [userdata] ...Done
Writing [userdata_101.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 4.8
  Reply With Quote
The Following 2 Users Say Thank You to sk solution For This Useful Post:
Old 09-30-2019, 11:55   #7724 (permalink)
Insane Poster
 
Join Date: Feb 2019
Location: India
Posts: 99
Member: 2892864
Status: Offline
Thanks Meter: 74
Donate money to this user
Cool Redmi 5A Mi Account + frp Rest Done

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937] [riva]
Software : N2G47H, V9.2.3.0.NCKMIEK [Wed Jan 31 23:00:03 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-01-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.8
  Reply With Quote
The Following 2 Users Say Thank You to sk solution For This Useful Post:
Old 09-30-2019, 12:40   #7725 (permalink)
Crazy Poster
 
Join Date: Dec 2014
Location: Malaysia
Posts: 58
Member: 2318529
Status: Offline
Thanks Meter: 71
Huawei Nova Lite Frp Done 8.0
  Reply With Quote
The Following 2 Users Say Thank You to biewolf23 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 15:14.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.41007 seconds with 9 queries

SEO by vBSEO