★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★

[nafe2me]

Vivo V9 Pro reset done in single click via Great UMT

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8976] 04007300
OPK_DATA : A103747D6F285B7FDDA476A5E985F67EB8D73574FB572BC345 35197B5417B2E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8976_017]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, EMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1804 [sdm660_64]
Brand : vivo
Prod.Name : sdm660_64
Software : OPM1.171019.011 release-keys, eng.compil.20180905.013749 [Wed Sep 5 01:37:49 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 7.1.0

[tajinder]

samsung m01s m017f reset frp done

peration : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM6
Port Name: MediaTek PreLoader USB VCOM (Android) (COM6)
Path: \\?\usb#vid_0e8d&pid_2000#5&2ab72a75&0&10#{86e0d1e 0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM5
Port Name: MediaTek USB Port (COM5)
Path: \\?\usb#vid_0e8d&pid_0003#5&2ab72a75&0&10#{f9f3ff1 4-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_s96116ca1_210820_163002.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Wed Jun 16 00:38:21 KST 2021
Build Flavor : a10sins-user
Build Desc. : a10sins-user 10 QP1A.190711.020 M017FXXU2BUF1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020.M017FXXU2BUF1
Patch Level : 2021-04-01
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

[tajinder]

samsung m01s m017f reset frp done

peration : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM6
Port Name: MediaTek PreLoader USB VCOM (Android) (COM6)
Path: \\?\usb#vid_0e8d&pid_2000#5&2ab72a75&0&10#{86e0d1e 0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM5
Port Name: MediaTek USB Port (COM5)
Path: \\?\usb#vid_0e8d&pid_0003#5&2ab72a75&0&10#{f9f3ff1 4-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_s96116ca1_210820_163002.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Wed Jun 16 00:38:21 KST 2021
Build Flavor : a10sins-user
Build Desc. : a10sins-user 10 QP1A.190711.020 M017FXXU2BUF1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020.M017FXXU2BUF1
Patch Level : 2021-04-01
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

[skakroliya]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: MediaTek PreLoader USB VCOM (Android) (COM3)
Path: \\?\usb#vid_0e8d&pid_2000#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM23
Port Name: MediaTek USB Port (COM23)
Path: \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_s96116ra1_210821_132028.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM23)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Tue Jul 20 09:07:23 +07 2021
Build Flavor : a10sxx-user
Build Desc. : a10sxx-user 11 RP1A.200720.012 A107FXXU8CUG3 release-keys
Android Ver. : 11
Display ID : RP1A.200720.012.A107FXXU8CUG3
Patch Level : 2021-07-01
Platform : MT6765
Board : S96116RA1
Platform : mt6765
Platform : MT6765
Board : S96116RA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

[djj007]

[skakroliya]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM23
Port Name: MediaTek USB Port (COM23)
Path: \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_x693_h697_210822_133607.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM23)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

[skakroliya]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM23
Port Name: MediaTek USB Port (COM23)
Path: \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k71v1_64_bsp_210824_140441.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM23)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Wed Mar 10 20:31:08 CST 2021
Build Flavor : full_k71v1_64_bsp-user
Build Desc. : full_k71v1_64_bsp-user 10 QP1A.190711.020 compiler03102007 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-03-01
Platform : MT6771
Board : k71v1_64_bsp
Platform : mt6771
Platform : MT6771
Board : k71v1_64_bsp
Platform : mt6771
Userdata is ENCRYPTED
Formatting Userdata...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

[mouhane]

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 8F1359FD1554B6295A938DC2BCAA90ADE0D790FD1A7758B0A0 07AFE1F5FF0DC5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_048]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, EMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : BullittGroupLimited S30 [msm8909] [CatS30]
Brand : Cat
Prod.Name : CatS30
Software : LTE_D0201121.0_S30_0.025.00, 1464 [Mon Nov 6 15:21:51 CST 2017]
Android Ver. : 5.1
Patch Level : 2017-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.2

[mouhane]

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 8F1359FD1554B6295A938DC2BCAA90ADE0D790FD1A7758B0A0 07AFE1F5FF0DC5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_048]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, EMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : BullittGroupLimited S30 [msm8909] [CatS30]
Brand : Cat
Prod.Name : CatS30
Software : LTE_D0201121.0_S30_0.025.00, 1464 [Mon Nov 6 15:21:51 CST 2017]
Android Ver. : 5.1
Patch Level : 2017-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.2

[Tanha0321]

Operation : Oppo/Realme Factory Reset (Meta)
Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Make sure to leave Buttons as soon as phone is detected.
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM23) on COM23
Device Path : \\?\usb#vid_22d9&pid_0006#6&95b3d2f&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM23) on COM23
Device Path : \\?\usb#vid_22d9&pid_0006#6&95b3d2f&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Configuring Communication Channel...
Reading phone information...
CPU : MT6763
SW Ver. : MOLY.LR12A.R1.TC16.SP.V26.P58
HW Ver. : OPPO6763_C66_N1_HW
Brand: OPPO
Model: CPH1723
Name: OPPO F5
Platform: unknown
OEM Prod.: unknown
OEM Device: unknown
Build Date: Thu Sep  3 23:22:48 CST 2020
Display ID: CPH1723EX_11_A.45_200903
OTA Version: M6763A_11.A.45_0450_202009032146
Patch Level: 2019-10-05
Starting Safe Factory Reset...
Reset Success
Operation finished
If META method does not work, try Format FS in BROM mode.
[UltimateMTK Ver. 4.4]

[Tanha0321]

Device    : Oppo A37f
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM37)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8916, EMMC, 16 GB
LU Count    : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : OPPO A37f [msm8916]
Brand    : OPPO
Prod.Name    : A37f
Software    : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver.    : 5.1.1
Patch Level    : 2018-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.8

[Tanha0321]

Brand : Oppo
Model : A31 (CPH2015)
Operation : Oppo Reset Locks
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM6
Port Name: MediaTek USB Port_V1632 (COM6)
Path: \\?\usb#vid_0e8d&pid_0003#6&66ca680&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_oppo6765_19581_210805_161302.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM6)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Manufacturer : OPPO
Build Flavor : full_oppo6765_19581-user
Build Desc. : full_oppo6765_19581-user 9 PPR1.180610.011 eng.root.20210625.165501 release-keys
Android Ver. : 9
Patch Level : 2021-07-05
Platform : MT6765
Board : oppo6765_19581
Platform : mt6765
Userdata is NOT ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- You must start phone directly in recovery.
- Hold Volume Down and Power ON to enter Recovery.
[UltimateMTK Ver. 4.4]

[Tanha0321]

Device    : Vivo Y11
Operation    : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00B00 [8937] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, EMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software    : , eng.compil.20210607.222122 [Mon Jun  7 22:13:49 CST 2021]
Android Ver.    : 11
Patch Level    : 2021-06-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 7.1.0

[Tanha0321]

Operation : Oppo/Realme Factory Reset (Meta)
Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Make sure to leave Buttons as soon as phone is detected.
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM84) on COM84
Device Path : \\?\usb#vid_22d9&pid_0006#6&66ca680&0&7#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM84) on COM84
Device Path : \\?\usb#vid_22d9&pid_0006#6&66ca680&0&7#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Configuring Communication Channel...
Reading phone information...
CPU : MT6763
SW Ver. : MOLY.LR12A.R1.TC16.SP.V26.P58
HW Ver. : OPPO6763_C66_N1_HW
Brand: OPPO
Model: CPH1729
Name: OPPO A83
Platform: unknown
OEM Prod.: unknown
OEM Device: unknown
Build Date: Fri Sep  4 00:52:36 CST 2020
Display ID: CPH1729EX_11_A.35_200903
OTA Version: M6763D_11.A.35_0350_202009032342
Patch Level: 2019-10-05
Starting Safe Factory Reset...
Reset Success
Operation finished
If META method does not work, try Format FS in BROM mode.
[UltimateMTK Ver. 4.4]

[Tanha0321]

Device    : Oppo A71 (CPH1801)
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM220)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1A00900 [8953] 00000000
OPK_DATA    : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 7.1.0