GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Ultimate Multi Tool Box

Ultimate Multi Tool Box Multi GSM & CDMA Box

Reply
 
LinkBack Thread Tools Display Modes
Old 10-18-2021, 13:32   #10426 (permalink)
Freak Poster
 
Join Date: Feb 2016
Location: ZIMBABWE
Posts: 167
Member: 2534995
Status: Offline
Thanks Meter: 62
Donate money to this user

Xiaomi Redmi Note 10 Reset Mi Account Done

Device : Xiaomi Redmi Note 10
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM100)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : SM6150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.5.2.0.RKGINXM [Sun Sep 5 12:36:20 CST 2021]
Android Ver. : 11
Patch Level : 2021-09-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
New Device Detected, Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Writing Data...Done
Operation Finished.
Device : Xiaomi Redmi Note 10
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM100)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : SM6150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.5.2.0.RKGINXM [Sun Sep 5 12:36:20 CST 2021]
Android Ver. : 11
Patch Level : 2021-09-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
New Device Detected, Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 7.3
  Reply With Quote
The Following 2 Users Say Thank You to mapopeemma For This Useful Post:
Old 10-23-2021, 15:22   #10427 (permalink)
Product Supporter
 
bk.gsm's Avatar
 
Join Date: Sep 2008
Location: UMT Support section
Age: 31
Posts: 2,480
Member: 869809
Status: Offline
Thanks Meter: 942
Mi 6 frp done

Code:
Operation	: Reset FRP
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info	: Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1E00500 [8998] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8998_002]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: MSM8996, UFS, 64 GB
LU Count	: 6 [0x00D40800] [0x00000800] [0x00000800] [0x00008000] [0x00194000] [0x00008000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi MI 6 [msm8998] [sagit]
Brand	: Xiaomi
Prod.Name	: sagit
Software	: OPR1.170623.027, V10.3.4.0.OCAMIXM [Mon May 27 21:17:58 CST 2019]
Android Ver.	: 8.0.0
Patch Level	: 2019-03-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 7.3
b.r.
  Reply With Quote
The Following User Says Thank You to bk.gsm For This Useful Post:
Old 10-25-2021, 12:44   #10428 (permalink)
Freak Poster
 
Join Date: Aug 2010
Location: india, haryana,
Posts: 163
Member: 1358048
Status: Offline
Thanks Meter: 195
Oppo A15s user lock reset

Code:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM6 [MediaTek USB Port_V1632 (COM6)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&81dc702&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6765_211025_165329.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM6)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Wed Aug 11 23:39:41 CST 2021
Build Flavor : full_oppo6765-user
Build Desc. : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-08-05
Userdata is NOT ENCRYPTED
Resetting Locks (Oppo)...
- Success!
---IMPORTANT---
Start phone directly in Recovery to complete operation.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]
  Reply With Quote
The Following User Says Thank You to skakroliya For This Useful Post:
Old 10-25-2021, 20:58   #10429 (permalink)
Freak Poster
 
Join Date: Nov 2016
Posts: 129
Member: 2650288
Status: Offline
Sonork: live:hackb151
Thanks Meter: 120
Oppo a15s unlock done & bootloader unlock & relock done

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM16 [MediaTek USB Port_V1633 (COM16)]
Device Path: \\?\usb#vid_0e8d&pid_0003#7&295d7f1&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6765_211026_010902.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM16)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Mon Dec 28 21:16:32 CST 2020
Build Flavor : full_oppo6765-user
Build Desc. : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-01-05
Platform : MT6765
Board : oppo6765
Platform : mt6765
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]


BOOTLOADRE UNLOCK




Operation : MTK Bootloader Unlock
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM16 [MediaTek USB Port_V1633 (COM16)]
Device Path: \\?\usb#vid_0e8d&pid_0003#7&295d7f1&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6765_211026_011516.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM16)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Mon Dec 28 21:16:32 CST 2020
Build Flavor : full_oppo6765-user
Build Desc. : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-01-05
Platform : MT6765
Board : oppo6765
Platform : mt6765
Userdata is NOT ENCRYPTED
Reading Data...
Bootloader Status : Locked [Default]
Critical Lock Status : Locked [Default]
Old Algo Detected!
Unlocking Bootloader...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]


BOOTLOADER RELOCK DONE

Operation : MTK Bootloader Unlock
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM16 [MediaTek USB Port_V1633 (COM16)]
Device Path: \\?\usb#vid_0e8d&pid_0003#7&295d7f1&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6765_211026_012729.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM16)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Mon Dec 28 21:16:32 CST 2020
Build Flavor : full_oppo6765-user
Build Desc. : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-01-05
Platform : MT6765
Board : oppo6765
Platform : mt6765
Userdata is NOT ENCRYPTED
Reading Data...
Bootloader Status : Unlocked
Critical Lock Status : Locked [Default]
Old Algo Detected!
Relocking Bootloader...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]
  Reply With Quote
The Following 2 Users Say Thank You to neyaz007 For This Useful Post:
Old 10-26-2021, 10:10   #10430 (permalink)
No Life Poster
 
Join Date: Apr 2011
Posts: 2,246
Member: 1562854
Status: Offline
Sonork: 1245
Thanks Meter: 214
Redmi 9t mi acc done

Code:
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM15)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1D01400 [SDM662] 00007200
OPK_DATA	: 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: SDM662, UFS, 64 GB
LU Count	: 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi
Software	: Android-Q-build-20210912205829, V12.0.16.0.QJQMIXM [Sun Sep 12 21:02:40 CST 2021]
Android Ver.	: 10
Patch Level	: 2021-09-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 7.3
  Reply With Quote
The Following User Says Thank You to rai14 For This Useful Post:
Old 10-26-2021, 11:42   #10431 (permalink)
No Life Poster
 
Join Date: Apr 2011
Posts: 2,246
Member: 1562854
Status: Offline
Sonork: 1245
Thanks Meter: 214
Redmi note 4x Reset Mi Account done

Code:
Operation	: Reset Mi Account (New)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM15)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1600400 [8953] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware	: 8953, EMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 4X [msm8953] [mido]
Brand	: xiaomi
Prod.Name	: mido
Software	: MMB29M, V8.5.4.0.MCFCNED [Wed Jul 19 22:01:16 CST 2017]
Android Ver.	: 6.0.1
Patch Level	: 2017-06-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Writing Data...Done
Operation Finished.
  Reply With Quote
The Following 2 Users Say Thank You to rai14 For This Useful Post:
Old 10-26-2021, 17:13   #10432 (permalink)
Freak Poster
 
Join Date: Aug 2012
Location: Crimea
Posts: 326
Member: 1797426
Status: Offline
Thanks Meter: 94
Samsung G531H FRP done

Brand : Samsung
Model : G531H
Operation : Reset FRP
Searching for Phone...Found
Port: : COM26 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : SPRD8735 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5.1

Operation : Generic ADB FRP Reset
Searching for Device...Found
Brand : samsung
Model : SM-G531H
Product : grandprimeve3g
Device : grandprimeve3g
Andriod Ver. : 5.1.1
Patch Level : 2017-07-01
PDA : G531HXXU0AQG2
Bootloader : G531HXXU0AQG2
Build ID : LMY48B.G531HXXU0AQG2
Build Date : Thu Jul 6 15:02:14 KST 2017
Resetting FRP Lock...Done
Operation Finished.
UltimateFRP Ver. 0.5.1
  Reply With Quote
The Following User Says Thank You to ivannikolaevich For This Useful Post:
Old 10-26-2021, 17:14   #10433 (permalink)
Freak Poster
 
Join Date: Aug 2012
Location: Crimea
Posts: 326
Member: 1797426
Status: Offline
Thanks Meter: 94
Samsung G531H FRP done

Brand : Samsung
Model : G531H
Operation : Reset FRP
Searching for Phone...Found
Port: : COM26 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : SPRD8735 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5.1

Operation : Generic ADB FRP Reset
Searching for Device...Found
Brand : samsung
Model : SM-G531H
Product : grandprimeve3g
Device : grandprimeve3g
Andriod Ver. : 5.1.1
Patch Level : 2017-07-01
PDA : G531HXXU0AQG2
Bootloader : G531HXXU0AQG2
Build ID : LMY48B.G531HXXU0AQG2
Build Date : Thu Jul 6 15:02:14 KST 2017
Resetting FRP Lock...Done
Operation Finished.
UltimateFRP Ver. 0.5.1
  Reply With Quote
The Following 2 Users Say Thank You to ivannikolaevich For This Useful Post:
Old 10-30-2021, 10:37   #10434 (permalink)
Freak Poster
 
Join Date: Aug 2010
Location: india, haryana,
Posts: 163
Member: 1358048
Status: Offline
Thanks Meter: 195
Gionee a1 frp reset

Code:
Brand : Gionee
Model : A1
Operation : Reset FRP
Connection Mode : Preloader
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : GIONEE
Manufacturer : GIONEE
Model : GIONEE A1
Prod. Name : A1
Device : GIONEE_SWW1609
Board : A1
Build Date : 2018年 02月 05日 星期一 10:10:11 CST
Build Flavor : full_gnsz6755_66_n-user
Build Desc. : full_gnsz6755_66_n-user 7.0 NRD90M 1516157237 release-keys
Platform : mt6755
Android Ver. : 7.0
Display ID : amigo4.0
Patch Level : 2018-01-05
Data missing! Could not read extended information!
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
  Reply With Quote
The Following User Says Thank You to skakroliya For This Useful Post:
Old 10-30-2021, 18:20   #10435 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 8,022
Member: 314003
Status: Offline
Thanks Meter: 2,831
Infinix Hot 6x Format & Frp

Code:
Device    : Infinix Hot 6x (X623)
Operation    : Format FS
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, EMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : INFINIX MOBILITY LIMITED Infinix X623 [Infinix-X623]
Brand    : Infinix
Prod.Name    : QL1819
Software    : X623-QL1819ABCDEFI-O-190425V51, ABCDEFI-190425V51 [Fri Apr 26 12:43:23 CST 2019]
Android Ver.    : 8.1.0
Patch Level    : 2019-05-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3
  Reply With Quote
The Following User Says Thank You to Tanha0321 For This Useful Post:
Old 10-30-2021, 18:21   #10436 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 8,022
Member: 314003
Status: Offline
Thanks Meter: 2,831
Realme C3 Frp

Code:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM9 [MediaTek USB Port_V1632 (COM9)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&95b3d2f&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768] [Helio P65/G85 k68v1]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6769_211027_191027.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM9)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Tue Sep 14 18:35:16 CST 2021
Build Flavor : full_oppo6769-user
Build Desc. : full_oppo6769-user 10 QP1A.190711.020 68b77aba7cb33275 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-09-05
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Failed!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]
  Reply With Quote
The Following User Says Thank You to Tanha0321 For This Useful Post:
Old 10-30-2021, 18:22   #10437 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 8,022
Member: 314003
Status: Offline
Thanks Meter: 2,831
Vivo Y53 Format & Frp

Code:
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM74)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, EMMC, 16 GB
LU Count    : 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : vivo vivo PD1628F_EX [msm8937] [PD1628F_EX]
Brand    : vivo
Prod.Name    : PD1628F_EX
Software    : MMB29M release-keys, eng.compiler.20190105.211334 [Sat Jan  5 21:20:28 CST 2019]
Android Ver.    : 6.0.1
Patch Level    : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3
  Reply With Quote
The Following User Says Thank You to Tanha0321 For This Useful Post:
Old 10-30-2021, 18:23   #10438 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 8,022
Member: 314003
Status: Offline
Thanks Meter: 2,831
Oppo A37f Format

Code:
Device    : Oppo A37f
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8916, EMMC, 16 GB
LU Count    : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : OPPO A37f [msm8916]
Brand    : OPPO
Prod.Name    : A37f
Software    : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver.    : 5.1.1
Patch Level    : 2018-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3
  Reply With Quote
The Following User Says Thank You to Tanha0321 For This Useful Post:
Old 10-30-2021, 18:24   #10439 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 8,022
Member: 314003
Status: Offline
Thanks Meter: 2,831
Oppo A57 Format

Code:
Device    : Oppo A57
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1B00600 [8937] 00000000
OPK_DATA    : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, EMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : OPPO OPPO A57 [msm8937] [A57]
Brand    : OPPO
Prod.Name    : A57
Software    : A57_11_A.19_170424, eng.root.20170424.005625 [Mon Apr 24 00:59:17 CST 2017]
Android Ver.    : 6.0.1
Patch Level    : 2017-03-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3
  Reply With Quote
The Following User Says Thank You to Tanha0321 For This Useful Post:
Old 10-31-2021, 13:09   #10440 (permalink)
Major Poster
 
Join Date: Jan 2008
Posts: 50
Member: 668748
Status: Offline
Thanks Meter: 55
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM455 [MediaTek USB Port (COM455)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&32a310c1&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_x650c_h626_211031_170338.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM455)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Brand : Infinix
Manufacturer : INFINIX MOBILITY LIMITED
Model : Infinix X650C
Prod. Name : H626
Device : Infinix-X650C
Build Date : Fri Nov 13 17:38:22 CST 2020
Build Flavor : full_x650c_h626-user
Build Desc. : full_x650c_h626-user 9 PPR1.180610.011 2 release-keys
Android Ver. : 9
Display ID : X650C-H626DEJ-P-201113V308
Patch Level : 2020-10-05
Platform : MT6765
Board : Infinix-X650C
Platform : mt6765
Userdata is ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]
  Reply With Quote
The Following 2 Users Say Thank You to imran_awan For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 06:50.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.18711 seconds with 8 queries

SEO by vBSEO