GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Ultimate Multi Tool Box
Reload this Page ★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Ultimate Multi Tool Box Multi GSM & CDMA Box

Reply
Page 728 of 809 « First 228628678718725726727 728 729730731738778 Last »
 
LinkBack Thread Tools Display Modes
Old 05-18-2022, 19:51   #10906 (permalink)
Insane Poster
 
Join Date: Nov 2013
Posts: 78
Member: 2059894
Status: Offline
Thanks Meter: 7
Samsung j250f frp reset

Model : Samsung
Operation : FRP Bypass [Enable ADB]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM112 : SAMSUNG Mobile USB Modem #20
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J250F
IMEI: : 355XXXXXXXXXXXXXXXX
Software: : J250FXXS2ATI1/J250FOJV2ASK1/J250FXXU2ASK1/J250FXXS2ATI1
Product : MWD
Enabling ADB...OK
Searching for Device...Found
Brand : samsung
Model : SM-J250F
Product : j2y18lte
Device : j2y18lte
Andriod Ver. : 7.1.1
Patch Level : 2019-10-01
PDA : J250FXXS2ATI1
Bootloader : J250FXXS2ATI1
Build ID : NMF26X.J250FXXS2ATI1
Build Date : Thu Sep 17 13:50:23 KST 2020
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
Elapsed Time 39:38
[UltimateSams v0.4]
  Reply With Quote
The Following 2 Users Say Thank You to hamidha.ha For This Useful Post:
Old 05-20-2022, 13:50   #10907 (permalink)
No Life Poster
 
Join Date: Nov 2016
Location: GUJARAT
Posts: 1,439
Member: 2643730
Status: Offline
Thanks Meter: 1,115
Vivo y11 qcom lock removed by qc fire
Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM1)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1906 [PD1930F_EX]
Brand : vivo
Prod.Name : PD1930F_EX
Software : PKQ1.190616.001 release-keys, compiler10221504 [Thu Oct 22 15:04:05 CST 2020]
Android Ver. : 9
Patch Level : 2020-10-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
  Reply With Quote
The Following 2 Users Say Thank You to djj007 For This Useful Post:
Old 05-20-2022, 13:51   #10908 (permalink)
No Life Poster
 
Join Date: Nov 2016
Location: GUJARAT
Posts: 1,439
Member: 2643730
Status: Offline
Thanks Meter: 1,115
SAMSUNG M01s (m017f) frp removed by umt mtk tool
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM21
Port Name: MediaTek PreLoader USB VCOM (Android) (COM21)
Path: \\?\usb#vid_0e8d&pid_2000#6&33ef2a9c&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM4 [MediaTek USB Port (COM4)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&33ef2a9c&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 61C77595F8BFAD9E3AACCE4D7F6F8F35
Preparing device...
-- Success!
Preloader saved as : preloader_s96116ra1_220520_181931.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Wed Sep 15 21:59:03 KST 2021
Build Flavor : a10sins-user
Build Desc. : a10sins-user 11 RP1A.200720.012 M017FXXU2CUI2 release-keys
Android Ver. : 11
Display ID : RP1A.200720.012.M017FXXU2CUI2
Patch Level : 2021-09-01
Platform : MT6765
Board : S96116RA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Seeking FRP Data...
- Resetting FRP...
- Success!
- Resetting FRP...
- Success!
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.0]
  Reply With Quote
The Following 2 Users Say Thank You to djj007 For This Useful Post:
Old 05-20-2022, 14:35   #10909 (permalink)
No Life Poster
 
Join Date: Nov 2016
Location: GUJARAT
Posts: 1,439
Member: 2643730
Status: Offline
Thanks Meter: 1,115
Samsung a50 (sm-a505f) frp removed by umt sam tool
  Reply With Quote
The Following 3 Users Say Thank You to djj007 For This Useful Post:
Show/Hide list of the thanked
Old 05-21-2022, 11:41   #10910 (permalink)
Product Supporter
 
bk.gsm's Avatar
 
Join Date: Sep 2008
Location: UMT Support section
Age: 33
Posts: 3,770
Member: 869809
Status: Offline
Thanks Meter: 1,706
infinix smart 5 imei repair done
Code:
Operation : IMEI Reapir [META (New)]
Checking for existing META ports...
Found MediaTek USB VCOM (Android) (COM20) on COM20
Device Path : usb\vid_0e8d&pid_200e&rev_0419&mi_01
Configuring Communication Channel...
Reading phone information...
CPU : MT6761
SW Ver. : MOLY.LR12A.R3.MP.V149.4.P39
HW Ver. : TK_MD_BASIC_HW
IMEI1 : 35********
IMEI2 : 35********
Reading data from phone...
Repairing IMEI1 to 354**********...
Repairing IMEI2 to 354**********...
Syncing Data...
Operation Finished.
[UltimateMTK Ver. 5.0]
b.r.
  Reply With Quote
The Following User Says Thank You to bk.gsm For This Useful Post:
Old 05-22-2022, 09:31   #10911 (permalink)
Freak Poster
 
Join Date: Aug 2010
Location: india, haryana,
Posts: 425
Member: 1358048
Status: Offline
Thanks Meter: 706
OPPO A54 unlock
Code:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM5 [MediaTek USB Port_V1632 (COM5)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: F9FD07AD8DE64C455E570791874A035F
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6765_220522_133957.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Sun Dec 19 01:37:57 CST 2021
Build Flavor : full_oppo6765-user
Build Desc. : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-11-05
Userdata is NOT ENCRYPTED
Erasing Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.0]
  Reply With Quote
The Following 2 Users Say Thank You to skakroliya For This Useful Post:
Old 05-22-2022, 16:22   #10912 (permalink)
Product Supporter
 
bk.gsm's Avatar
 
Join Date: Sep 2008
Location: UMT Support section
Age: 33
Posts: 3,770
Member: 869809
Status: Offline
Thanks Meter: 1,706
Redmi Note 8 with latest MIUI Mi account bypass done
Code:
Operation	: Reset Mi Account (New)
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info	: Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1A01000 [SDM665] 00007200
OPK_DATA	: 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware	: SDM665, EMMC, 64 GB
LU Count	: 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi
Software	: , V12.5.1.0.RCOINXM [Mon Dec 20 17:48:59 WIB 2021]
Android Ver.	: 11
Patch Level	: 2021-12-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 7.8
b.r.
  Reply With Quote
The Following User Says Thank You to bk.gsm For This Useful Post:
Old 05-23-2022, 12:26   #10913 (permalink)
Product Supporter
 
bk.gsm's Avatar
 
Join Date: Sep 2008
Location: UMT Support section
Age: 33
Posts: 3,770
Member: 869809
Status: Offline
Thanks Meter: 1,706
Redmi Note 7 bootloader unlocked
Code:
Operation	: Xiaomi Boot Patch
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info	: Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1C00800 [8996] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware	: MSM8996, EMMC, 32 GB
LU Count	: 4 [0x03A3E000] [0x00002000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi
Software	: QKQ1.190910.002 V12.5.1.0.QFGRUXM, V12.5.1.0.QFGRUXM [Fri Sep  3 14:31:33 WIB 2021]
Android Ver.	: 10
Patch Level	: 2021-08-01
Processing Redmi_Note7........Done
Rebooting to Fastboot...Done
Put phone in Fastboot mode if it is not in Fastboot Mode.
Then try Unlock BL in Fastboot Mode.
Operation Finished.
QcFire Ver. 7.8
Code:
Operation	: Bootloader Unlock (Fastboot)
Searching for Device in FastBoot Mode...OK
Reading Information...OK
FastBoot Ver.	: GetVar Variable Not found
Product	: wayne
Bootloader	: Locked
Unlocking Bootloader...Done
QcFire Ver. 7.8
  Reply With Quote
The Following User Says Thank You to bk.gsm For This Useful Post:
Old 05-23-2022, 12:28   #10914 (permalink)
Product Supporter
 
bk.gsm's Avatar
 
Join Date: Sep 2008
Location: UMT Support section
Age: 33
Posts: 3,770
Member: 869809
Status: Offline
Thanks Meter: 1,706
Redmi Note 7 re-flashed successfully
Code:
Operation	: Flash
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info	: Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1C00800 [8996] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware	: MSM8996, EMMC, 32 GB
LU Count	: 4 [0x03A3E000] [0x00002000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi
Software	: QKQ1.190910.002 V12.5.1.0.QFGRUXM, V12.5.1.0.QFGRUXM [Fri Sep  3 14:31:33 WIB 2021]
Android Ver.	: 10
Patch Level	: 2021-08-01
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [vbmeta.img] -> [vbmetabak] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [storsec.mbn] -> [storsecbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [pmic.elf] -> [pmic] ...Done
Writing [pmic.elf] -> [pmicbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [abl.elf] -> [ablbak] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [mdtpsecapp.mbn] -> [mdtpsecapp] ...Done
Writing [mdtpsecapp.mbn] -> [mdtpsecappbak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [BTFM.bin] -> [bluetooth] ...Done
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl.elf] -> [xblbak] ...Done
Writing [dspso.bin] -> [dsp] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dtbo.img] -> [dtbobak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [system.img ] -> [system]...Done
Writing [vendor.img ] -> [vendor]...Done
Writing [cust.img ] -> [cust]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.8
b.r.
  Reply With Quote
The Following User Says Thank You to bk.gsm For This Useful Post:
Old 05-23-2022, 14:21   #10915 (permalink)
Freak Poster
 
Join Date: Aug 2010
Location: india, haryana,
Posts: 425
Member: 1358048
Status: Offline
Thanks Meter: 706
Oppo A71 password unlock
Code:
Device	: Oppo A71 (CPH1801)
Operation	: Format FS
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info	: Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1A00900 [8953] 00000000
OPK_DATA	: 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 7.7
  Reply With Quote
The Following 2 Users Say Thank You to skakroliya For This Useful Post:
Old 05-24-2022, 14:35   #10916 (permalink)
No Life Poster
 
Join Date: Nov 2016
Location: GUJARAT
Posts: 1,439
Member: 2643730
Status: Offline
Thanks Meter: 1,115
Oppo a37f patten lock read by qc fire
Operation : Read Pattern Lock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM1)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Brand : OPPO
Prod.Name : A37f
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
USERDATA : Normal
Reading Pattern Data...Done
Pattern : 1452
Operation Finished.
QcFire Ver. 7.8
  Reply With Quote
The Following 2 Users Say Thank You to djj007 For This Useful Post:
Old 05-24-2022, 16:58   #10917 (permalink)
No Life Poster
 
Join Date: Aug 2012
Location: Crimea
Posts: 515
Member: 1797426
Status: Offline
Thanks Meter: 289
Nokia 5 flash done

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM109)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966 024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_011]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : FIH TA-1003 [msm8937] [D1C]
Brand : Nokia
Prod.Name : TA-1003_00WW
Software : 00WW_3_700, 00WW_3_700 [Sun Sep 24 21:04:49 CST 2017]
Android Ver. : 7.1.2
Patch Level : 2017-10-01
Writing [study.tar] -> [fsg] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [system.img] -> [system] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.8
  Reply With Quote
The Following 2 Users Say Thank You to ivannikolaevich For This Useful Post:
Old 05-25-2022, 12:51   #10918 (permalink)
No Life Poster
 
Join Date: Aug 2012
Location: Crimea
Posts: 515
Member: 1797426
Status: Offline
Thanks Meter: 289
POCO M3 flash done

Operation : Multi Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20220429213641, V12.5.8.0.RJFMIXM [Fri Apr 29 21:37:57 CST 2022]
Android Ver. : 11
Patch Level : 2022-05-01
Processing [rawprogram0.xml]
Writing [vbmeta_system.img] -> [vbmeta_system] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [super.img ] -> [super]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [xbl.elf] -> [xbl] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl_config.elf] -> [xbl_configbak] ...Done
Writing [xbl.elf] -> [xblbak] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [multi_image.mbn] -> [multiimgoem] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [qupv3fw.elf] -> [qupfw] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [BTFM.bin] -> [bluetooth] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [abl.elf] -> [ablbak] ...Done
Writing [imagefv.elf] -> [imagefv] ...Done
Writing [imagefv.elf] -> [imagefvbak] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [uefi_sec.mbn] -> [uefisecappbak] ...Done
Writing [featenabler.mbn] -> [featenabler] ...Done
Writing [featenabler.mbn] -> [featenablerbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dspso.bin] -> [dsp] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.8
  Reply With Quote
The Following 2 Users Say Thank You to ivannikolaevich For This Useful Post:
Old 05-25-2022, 12:51   #10919 (permalink)
No Life Poster
 
Join Date: Aug 2012
Location: Crimea
Posts: 515
Member: 1797426
Status: Offline
Thanks Meter: 289
POCO M3 flash done

Operation : Multi Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20220429213641, V12.5.8.0.RJFMIXM [Fri Apr 29 21:37:57 CST 2022]
Android Ver. : 11
Patch Level : 2022-05-01
Processing [rawprogram0.xml]
Writing [vbmeta_system.img] -> [vbmeta_system] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [super.img ] -> [super]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [xbl.elf] -> [xbl] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl_config.elf] -> [xbl_configbak] ...Done
Writing [xbl.elf] -> [xblbak] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [multi_image.mbn] -> [multiimgoem] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [qupv3fw.elf] -> [qupfw] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [BTFM.bin] -> [bluetooth] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [abl.elf] -> [ablbak] ...Done
Writing [imagefv.elf] -> [imagefv] ...Done
Writing [imagefv.elf] -> [imagefvbak] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [uefi_sec.mbn] -> [uefisecappbak] ...Done
Writing [featenabler.mbn] -> [featenabler] ...Done
Writing [featenabler.mbn] -> [featenablerbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dspso.bin] -> [dsp] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.8
  Reply With Quote
The Following 2 Users Say Thank You to ivannikolaevich For This Useful Post:
Old 05-25-2022, 19:49   #10920 (permalink)
No Life Poster
 
Join Date: Aug 2012
Location: Crimea
Posts: 515
Member: 1797426
Status: Offline
Thanks Meter: 289
vivo v2027 Reset Lock done only with custom Loader

Device : Vivo Y20 (PD2034F)
Operation : Reset Locks (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601300 [SDM460] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Using Auto Loader Selection [4]
No compatible loader found. Device may not boot with this loader.
Preparing Loader...Done
Sending Loader [SDM460]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 7.7

Model : - Manual Method
Operation : Erase Userdata
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601300 [SDM460] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Initiazling Storage...OK
Read : Protected
Write : Protected
Alt. Write : Blocked
Erasing Userdata...Done
Operation Finished.
QcFire Ver. 7.7
  Reply With Quote
The Following 2 Users Say Thank You to ivannikolaevich For This Useful Post:
Reply
Page 728 of 809 « First 228628678718725726727 728 729730731738778 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 02:25.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.22982 seconds with 10 queries

SEO by vBSEO