★★★ Post Here successful jobs using UMT - Ulitmate SPRD Unisoc Module ★★★ - Page 4 - GSM-Forum

ivannikolaevich · 10-31-2022, 13:17

ZTE Blade A5 2020 Removing frp done

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.2
SELECTED: SC9863A_EMMC_ZTE
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM56)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T44P14_4_25_26
***************
Build ID: PPR1.180610.011
CPU arhitecture: arm64-v8a
Manufacturer: ZTE
Hardware: s9863a1h10
Build product name: P963F50
Build description: s9863a1h10_Natv-user 9 PPR1.180610.011 476 release-keys
Product name: RU_P963F50
ZTE product name: ZTE Blade A5 2020
SW Version: GEN_RU_P963F50V1.0.0B21
Board: smooth
Build Id: PPR1.180610.011
Model: ZTE Blade A5 2020RU
Android Release: 9
Android Version: GEN_RU_A5_2020_V2.5
Security patch: 2022-01-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\GEN_RU_A5_2020_V2.5_erase_frp.txt
Total Time: 00:00:11
Done.

bruno santana · 11-07-2022, 18:46

reset frp multilaser s105
multilaser f
Cortex-A7 Unisoc SC7731E

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.1
SELECTED: SC7731E_EMMC_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM23)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TBYG11_16_4_21
***************
[S]Manufacturer: Multilaser
[S]Brand: Multilaser
[S]Device: Multilaser_F_A10
[S]Model: Multilaser_F
Build ID: QP1A.190711.020
CPU arhitecture: armeabi-v7a
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: k211
Build description: k211-user 10 QP1A.190711.020 1621308331 release-keys
Build Id: QP1A.190711.020
Android Release: 10
Android Version: ML-TI-MSF.V4_20210518
Security patch: 2021-05-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\Saved_Logs\ML-TI-MSF.V4_20210518_erase_frp.txt
Total Time: 00:00:23
Done.

ivannikolaevich · 11-15-2022, 17:04

Texet TM-7866 Flash Firmware done

EXE: Ultimate Unisoc Module v0.2
ACTION: Flash Firmware.
Selected firmware: S906_JR_YK150602008_20161203_V1.5.pac
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Detected: SPRD U2S Diag (COM56)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:02] [1]First boot done.
[00:00:02] Sending second loader.
[00:00:03] Second loader sent ok.
[00:00:03] Reading: system
System name: system
Phone and firmware have same android
[00:00:04] Reading: miscdata
[00:00:04] Reading: wfixnv1
NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_352***********\_352***********_nvr am_backup.tar
[00:00:15] Making flash ic repartition.
[00:00:15] Start write: prodnv
[00:00:17] Format: uboot
[00:00:18] [uboot]Format OK.
[00:00:18] Start write: splloader
[00:00:18] Start write: wmodem
[00:00:21] Start write: wdsp
[00:00:22] Start write: wcnmodem
[00:00:23] Start write: boot
[00:00:26] Start write: recovery
[00:00:30] Start write: system
[00:06:31] Start write: userdata
[00:06:42] Start write: logo
[00:06:42] Start write: fbootlogo
[00:06:43] Format: wruntimenv1
[00:06:43] [wruntimenv1]Format OK.
[00:06:43] Format: wcnruntimenv1
[00:06:43] [wcnruntimenv1]Format OK.
[00:06:43] Start write: cache
[00:06:46] Format: misc
[00:06:46] [misc]Format OK.
[00:06:46] Format: internalsd
[00:06:48] [internalsd]Format OK.
[00:06:48] Format: internalsd
[00:06:49] [internalsd]Format OK.
[00:06:49] Start write: uboot
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__11.txt
Total Time: 00:07:00
Done.

imran_awan · 11-16-2022, 08:22

Action: Reset Phone.
Detecting phone, wait...
Using connection mode 1
Detected: SPRD U2S Diag (COM30)

Platform Version: MOCORTM_20A_W22.28.2_Debug
Project Version: sharkl5pro_pub
BASE Version: 4G_MODEM_20A_W22.28.2
HW Version: sharkl5pro_modem
07-12-2022 03:37:02
Build number: S19610AA1_ctcc-user 11 RP1A.201005.001 35600 release-keys
EMMC DDR SIZE :30.00 GB+-1.00 MB
UID: e0f3d7fa3f1740be31c5aeddac2a48a496796e1a7a40465017 dfec623100efc3
AT UID: W+SPGETUID: 63792c1d19d1fd201cc9782c3b890f38a8f8111066e0b13a04 e685589e7aba18

IMEI 1: 000000000000000
IMEI 2: 000000000000000:
IMEI 3: 000000000000000
IMEI 4: 000000000000000
DONE
DONE
DONE
DONE
Done.
Log saved:
C:\Users\guls\Documents\spreadtrum_module\Saved_Lo gs\S19610AA1_ctcc-user11RP1A.201005.00135600release-keys_867647053662839_diag_reset_phone.txt

ivannikolaevich · 12-14-2022, 16:48

finepower d1 Flash Firmware done

EXE: Ultimate Unisoc Module v0.2
ACTION: Flash Firmware.
Selected firmware: D1_R01_07.11.2017_V1.2.pac
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM56)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:02] [1]First boot done.
[00:00:02] Sending second loader.
[00:00:06] Second loader sent ok.
[00:00:06] Reading: system
System name: system
Phone and firmware have same android
[00:00:06] Reading: miscdata
[00:00:06] Reading: wfixnv1
NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_35*********\_35************_nvram_ backup.tar
[00:00:13] Making flash ic repartition.
[00:00:13] Start write: prodnv
[00:00:14] Format: uboot
[00:00:14] [uboot]Format OK.
[00:00:14] Start write: splloader
[00:00:14] Start write: wmodem
[00:00:16] Start write: wdsp
[00:00:16] Start write: wcnmodem
[00:00:17] Start write: boot
[00:00:19] Start write: recovery
[00:00:21] Start write: system
[00:02:25] Start write: persist
[00:02:26] Start write: userdata
[00:02:30] Start write: logo
[00:02:30] Start write: fbootlogo
[00:02:31] Format: wruntimenv1
[00:02:31] [wruntimenv1]Format OK.
[00:02:31] Format: wcnruntimenv1
[00:02:31] [wcnruntimenv1]Format OK.
[00:02:31] Start write: cache
[00:02:32] Format: misc
[00:02:32] [misc]Format OK.
[00:02:32] Start write: persist
[00:02:33] Start write: sysinfo
[00:02:34] Start write: uboot
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__12.txt
Total Time: 00:02:45
Done.

11-16-2022, 08:22	#49 (permalink)
imran_awan Insane Poster Join Date: Jan 2008 Posts: 78 Member: 668748 Status: Offline Thanks Meter: 110	realme c21y Reset Phone Action: Reset Phone. Detecting phone, wait... Using connection mode 1 Detected: SPRD U2S Diag (COM30) Platform Version: MOCORTM_20A_W22.28.2_Debug Project Version: sharkl5pro_pub BASE Version: 4G_MODEM_20A_W22.28.2 HW Version: sharkl5pro_modem 07-12-2022 03:37:02 Build number: S19610AA1_ctcc-user 11 RP1A.201005.001 35600 release-keys EMMC DDR SIZE :30.00 GB+-1.00 MB UID: e0f3d7fa3f1740be31c5aeddac2a48a496796e1a7a40465017 dfec623100efc3 AT UID: W+SPGETUID: 63792c1d19d1fd201cc9782c3b890f38a8f8111066e0b13a04 e685589e7aba18 IMEI 1: 000000000000000 IMEI 2: 000000000000000: IMEI 3: 000000000000000 IMEI 4: 000000000000000 DONE DONE DONE DONE Done. Log saved: C:\Users\guls\Documents\spreadtrum_module\Saved_Lo gs\S19610AA1_ctcc-user11RP1A.201005.00135600release-keys_867647053662839_diag_reset_phone.txt Last edited by bk.gsm; 11-16-2022 at 11:09.

10-31-2022, 13:17	#46 (permalink)
ivannikolaevich No Life Poster Join Date: Aug 2012 Location: Crimea Posts: 515 Member: 1797426 Status: Offline Thanks Meter: 289	ZTE Blade A5 2020 Removing frp done Phone Storage: EMMC EXE: Ultimate Unisoc Module v0.2 SELECTED: SC9863A_EMMC_ZTE ACTION: Erase FRP Loader format:NEW Start Detect phone. Phone must be off with battery inside. Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM56) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. New flash metod detected. UID: T44P14_4_25_26 *************** Build ID: PPR1.180610.011 CPU arhitecture: arm64-v8a Manufacturer: ZTE Hardware: s9863a1h10 Build product name: P963F50 Build description: s9863a1h10_Natv-user 9 PPR1.180610.011 476 release-keys Product name: RU_P963F50 ZTE product name: ZTE Blade A5 2020 SW Version: GEN_RU_P963F50V1.0.0B21 Board: smooth Build Id: PPR1.180610.011 Model: ZTE Blade A5 2020RU Android Release: 9 Android Version: GEN_RU_A5_2020_V2.5 Security patch: 2022-01-05 This phone have frp partition. Removing frp, wait... Format OK. [can take 0-10 sec]Wait untill phone restart. Log saved: C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\GEN_RU_A5_2020_V2.5_erase_frp.txt Total Time: 00:00:11 Done.

11-15-2022, 17:04	#48 (permalink)
ivannikolaevich No Life Poster Join Date: Aug 2012 Location: Crimea Posts: 515 Member: 1797426 Status: Offline Thanks Meter: 289	Texet TM-7866 Flash Firmware done EXE: Ultimate Unisoc Module v0.2 ACTION: Flash Firmware. Selected firmware: S906_JR_YK150602008_20161203_V1.5.pac NV: Skip write nvram Device Storage: EMMC Start Detect phone... Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. For some phones need to Long press "VOL -"+ "VOL +" key while inserting usb cable. Detected: SPRD U2S Diag (COM56) [00:00:00] Sending loader. BOOT: SPRD3 Sending loader, keep boot key untill loader start. [00:00:01] Loader ok [00:00:01] Wait for loader.... Loader OK: ~"Spreadtrum Boot Block version 1.1 Changing bautrate OK. [00:00:02] [1]First boot done. [00:00:02] Sending second loader. [00:00:03] Second loader sent ok. [00:00:03] Reading: system System name: system Phone and firmware have same android [00:00:04] Reading: miscdata [00:00:04] Reading: wfixnv1 NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_352*********\_352*********_nvr am_backup.tar [00:00:15] Making flash ic repartition. [00:00:15] Start write: prodnv [00:00:17] Format: uboot [00:00:18] [uboot]Format OK. [00:00:18] Start write: splloader [00:00:18] Start write: wmodem [00:00:21] Start write: wdsp [00:00:22] Start write: wcnmodem [00:00:23] Start write: boot [00:00:26] Start write: recovery [00:00:30] Start write: system [00:06:31] Start write: userdata [00:06:42] Start write: logo [00:06:42] Start write: fbootlogo [00:06:43] Format: wruntimenv1 [00:06:43] [wruntimenv1]Format OK. [00:06:43] Format: wcnruntimenv1 [00:06:43] [wcnruntimenv1]Format OK. [00:06:43] Start write: cache [00:06:46] Format: misc [00:06:46] [misc]Format OK. [00:06:46] Format: internalsd [00:06:48] [internalsd]Format OK. [00:06:48] Format: internalsd [00:06:49] [internalsd]Format OK. [00:06:49] Start write: uboot Flashing done. [can take 0-10 sec]Wait untill phone restart. Log saved: C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__11.txt Total Time: 00:07:00 Done.

12-14-2022, 16:48	#50 (permalink)
ivannikolaevich No Life Poster Join Date: Aug 2012 Location: Crimea Posts: 515 Member: 1797426 Status: Offline Thanks Meter: 289	finepower d1 Flash Firmware done EXE: Ultimate Unisoc Module v0.2 ACTION: Flash Firmware. Selected firmware: D1_R01_07.11.2017_V1.2.pac NV: Skip write nvram Device Storage: EMMC Start Detect phone. Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM56) [00:00:00] Sending loader. BOOT: SPRD3 Sending loader, keep boot key untill loader start. [00:00:01] Loader ok [00:00:01] Wait for loader.... Loader OK: ~"Spreadtrum Boot Block version 1.1 Changing bautrate OK. [00:00:02] [1]First boot done. [00:00:02] Sending second loader. [00:00:06] Second loader sent ok. [00:00:06] Reading: system System name: system Phone and firmware have same android [00:00:06] Reading: miscdata [00:00:06] Reading: wfixnv1 NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_35*******\_35**********_nvram_ backup.tar [00:00:13] Making flash ic repartition. [00:00:13] Start write: prodnv [00:00:14] Format: uboot [00:00:14] [uboot]Format OK. [00:00:14] Start write: splloader [00:00:14] Start write: wmodem [00:00:16] Start write: wdsp [00:00:16] Start write: wcnmodem [00:00:17] Start write: boot [00:00:19] Start write: recovery [00:00:21] Start write: system [00:02:25] Start write: persist [00:02:26] Start write: userdata [00:02:30] Start write: logo [00:02:30] Start write: fbootlogo [00:02:31] Format: wruntimenv1 [00:02:31] [wruntimenv1]Format OK. [00:02:31] Format: wcnruntimenv1 [00:02:31] [wcnruntimenv1]Format OK. [00:02:31] Start write: cache [00:02:32] Format: misc [00:02:32] [misc]Format OK. [00:02:32] Start write: persist [00:02:33] Start write: sysinfo [00:02:34] Start write: uboot Flashing done. [can take 0-10 sec]Wait untill phone restart. Log saved: C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__12.txt Total Time: 00:02:45 Done.