REDMI NOTE 5 ??????? mi account [Answered] - GSM-Forum

tornado779 · 07-12-2019, 14:50

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Failed
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.5

**U.M.T** · 07-12-2019, 15:00

Fixed Auth Bug for Older Phones
- Updated loader caused some old phones to ask for Auth
- Affected phones were Y2, S2, Redmi 5 Plus etc
- Note 5 Pro may ask for Auth sometimes, its normal, just retry

Br,
UMT

tornado779 · 07-12-2019, 15:15

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Failed
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.5

**U.M.T** · 07-12-2019, 18:11

Note 5 Pro may ask for Auth sometimes, its normal, just retry.

Br,
UMT

tornado779 · 07-13-2019, 14:02

Device : Xiaomi Redmi Note 5 Pro
Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Failed
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.5

bk.gsm · 07-13-2019, 14:15

Quote:

Originally Posted by tornado779

Device : Xiaomi Redmi Note 5 Pro
Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Failed
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.5

hi

disconnect the phone battery and wait for 2 minutes then retry..

b.r.

tornado779 · 07-13-2019, 16:03

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Failed
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.5

bk.gsm · 07-14-2019, 12:50

Quote:

Originally Posted by tornado779

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...Failed
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.5

try with QCfire 4.3 version and post results here..

b.r.

**U.M.T** · 07-14-2019, 18:06

Update drivers, try on anothe lr PC, another cable, another port etc.

If phone asks for auth, software must be able to read auth data from phone. If not there was some communication error.

Br,
UMT

Wasim007 · 07-15-2019, 12:36

redmi note 4x error.................

Searching for phone in sideload mode...Found
Device Id : mido_global
Version : V8.2.10.0.MCFMIDL
Code Base : 6.0.1
Ext Info : , en, F
Formatting Data...Done
Rebooting device...Done
Operation Finished.
QcFire Ver. 4.4

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...OK
Blob : AQAAAPkiAAB0z8mXJT0NFLq55SUmawTUVjLMXA
Getting Auth Data...Auth App Not Running!
Run App by click Auth App button.
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.4

**U.M.T** · 07-15-2019, 15:21

Quote:

Originally Posted by Wasim007

redmi note 4x error.................

Searching for phone in sideload mode...Found
Device Id : mido_global
Version : V8.2.10.0.MCFMIDL
Code Base : 6.0.1
Ext Info : , en, F
Formatting Data...Done
Rebooting device...Done
Operation Finished.
QcFire Ver. 4.4

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...OK
Blob : AQAAAPkiAAB0z8mXJT0NFLq55SUmawTUVjLMXA
Getting Auth Data...Auth App Not Running!
Run App by click Auth App button.
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.4

Please try to read posts in forum. Posting repeated question is nothing but like spam.

Use 4.5 and post result.

Br,
UMT

Wasim007 · 07-16-2019, 06:36

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 Plus [msm8953] [vince]
Software : ZQL1711-vince-build-20180914130604, V10.0.2.0.OEGMIFH [Fri Sep 14 13:05:44 WIB 2018]
Android Ver. : 8.1.0
Patch Level : 2018-08-05
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.5

QcFire Ver. 4.5 working good..........................thanku

nyokafey · 07-22-2020, 17:37

Quote:

Originally Posted by U.M.T

Fixed Auth Bug for Older Phones
- Updated loader caused some old phones to ask for Auth
- Affected phones were Y2, S2, Redmi 5 Plus etc
- Note 5 Pro may ask for Auth sometimes, its normal, just retry

Br,
UMT

Operation : Disable Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM60)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8937_ddr.mbn]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...OK
Blob : NDE1MTQxNDE0MTRDNjM0MjQxNDE0NDMwNEI2QTMxMzI1NTRFNT IzODUxNTM2QjY4NDU2NTYyMzQ1MjQzMzk0RTU4NzM0RTcwNDg1 MT==
Requesting UMT Server for Auth Data...Auth Denied!
Please make sure Find Device is OFF
Detecting Chip Type...OK
VIP Enabled / Auth Enabled Device!
Error Log : PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID 8+PGRhdGE+PGxvZyB2YWx1ZT0iRVJST1I6IE9ubHkgbm9wIGFu ZCBzaWcgdGFnIGNhbiBiZSByZWNldmllZCBiZWZvcmUgYXV0aG VudGljYXRpb24uIiAvPjwvZGF0YT48P3htbCB2ZXJzaW9uPSIx LjAiIGVuY29kaW5nPSJVVEYtOCIgPz48ZGF0YT48cmVzcG9uc2 UgdmFsdWU9Ik5BSyIgLz48L2RhdGE+
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 5.7

plz help

nyokafey · 07-22-2020, 17:46

plz help server or what problem sir

Requesting UMT Server for Auth Data...Auth Denied!

**U.M.T** · 07-23-2020, 19:48

Problem is stated in just below your selected line:

Quote:

Please make sure Find Device is OFF

Br,
UMT

07-12-2019, 14:50	#1 (permalink)
tornado779 No Life Poster Join Date: Jan 2010 Location: iraq Posts: 2,050 Member: 1215266 Status: Offline Thanks Meter: 129	REDMI NOTE 5 ??????? mi account [Answered] Operation : Reset Mi Account Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1C00C00 [8996] 00000000 OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8996_016]...Done Executing Loader...OK Auth Enabled Device! You need Mi Auth Account to service! Reading Auth Blob...Failed Storage Initializaton Failed! Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 4.5

07-12-2019, 15:00	#2 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	Fixed Auth Bug for Older Phones - Updated loader caused some old phones to ask for Auth - Affected phones were Y2, S2, Redmi 5 Plus etc - Note 5 Pro may ask for Auth sometimes, its normal, just retry Br, UMT

07-12-2019, 15:15	#3 (permalink)
tornado779 No Life Poster Join Date: Jan 2010 Location: iraq Posts: 2,050 Member: 1215266 Status: Offline Thanks Meter: 129	Operation : Reset Mi Account Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1C00C00 [8996] 00000000 OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8996_016]...Done Executing Loader...OK Auth Enabled Device! You need Mi Auth Account to service! Reading Auth Blob...Failed Storage Initializaton Failed! Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 4.5

07-12-2019, 18:11	#4 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	Note 5 Pro may ask for Auth sometimes, its normal, just retry. Br, UMT

07-13-2019, 14:02	#5 (permalink)
tornado779 No Life Poster Join Date: Jan 2010 Location: iraq Posts: 2,050 Member: 1215266 Status: Offline Thanks Meter: 129	Device : Xiaomi Redmi Note 5 Pro Operation : Reset Mi Account Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1C00C00 [8996] 00000000 OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8996_016]...Done Executing Loader...OK Auth Enabled Device! You need Mi Auth Account to service! Reading Auth Blob...Failed Storage Initializaton Failed! Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 4.5

07-13-2019, 16:03	#7 (permalink)
tornado779 No Life Poster Join Date: Jan 2010 Location: iraq Posts: 2,050 Member: 1215266 Status: Offline Thanks Meter: 129	Operation : Reset Mi Account Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1C00C00 [8996] 00000000 OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8996_016]...Done Executing Loader...OK Auth Enabled Device! You need Mi Auth Account to service! Reading Auth Blob...Failed Storage Initializaton Failed! Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 4.5

07-14-2019, 18:06	#9 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	Update drivers, try on anothe lr PC, another cable, another port etc. If phone asks for auth, software must be able to read auth data from phone. If not there was some communication error. Br, UMT

07-15-2019, 12:36	#10 (permalink)
Wasim007 No Life Poster Join Date: May 2007 Location: india Posts: 695 Member: 500302 Status: Offline Thanks Meter: 157	redmi note 4x error................. Searching for phone in sideload mode...Found Device Id : mido_global Version : V8.2.10.0.MCFMIDL Code Base : 6.0.1 Ext Info : , en, F Formatting Data...Done Rebooting device...Done Operation Finished. QcFire Ver. 4.4 Operation : Reset Mi Account Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM11) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8953]...Done Executing Loader...OK Auth Enabled Device! You need Mi Auth Account to service! Reading Auth Blob...OK Blob : AQAAAPkiAAB0z8mXJT0NFLq55SUmawTUVjLMXA Getting Auth Data...Auth App Not Running! Run App by click Auth App button. Storage Initializaton Failed! Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 4.4

07-16-2019, 06:36	#12 (permalink)
Wasim007 No Life Poster Join Date: May 2007 Location: india Posts: 695 Member: 500302 Status: Offline Thanks Meter: 157	Operation : Reset Mi Account Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM11) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8953]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8953, eMMC, 32 GB LU Count : 1 [0x03A3E000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Redmi 5 Plus [msm8953] [vince] Software : ZQL1711-vince-build-20180914130604, V10.0.2.0.OEGMIFH [Fri Sep 14 13:05:44 WIB 2018] Android Ver. : 8.1.0 Patch Level : 2018-08-05 Resetting Mi Account Data...Done When phone is completely ON, connect to Internet and add Mi Account. -------------- INFORMATION -------------- New Firmware may cause hang on logo. In such case, you need to flash phone to recover. Or downgrade firmware and try Reset Mi Account again. Operation Finished. QcFire Ver. 4.5 QcFire Ver. 4.5 working good..........................thanku

07-22-2020, 17:46	#14 (permalink)
nyokafey Freak Poster Join Date: Aug 2009 Location: Zanzibar Tanzania Posts: 129 Member: 1091079 Status: Offline Thanks Meter: 13	plz help server or what problem sir Requesting UMT Server for Auth Data...Auth Denied!