[report] Honor 50 Lite NTN-LX1 FRP Success

[nbkappa]

use testpoint as seen on internet



Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 0100A401
OPK_DATA : 89CF13A6FB967253B3EC80DAA609EA1E2DD855F6B2DA88B486 45CDFB8ECBFDB2
Initializing Protocol...OK
Sending Loader [Loader_honor_50_lite.mbn]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01D94000] [0x00000800] [0x00000800] [0x00000800] [0x00033800] [0x00001800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...Failed [ but ignore it, no problem ]
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 8.0




tested on device with :

Android 11
Magic UI 4.2
Build 4.2.0.178