tecno kg6
 

hi
cannot format phone tecno kg6.i have received phone freew at fastboot but cannot format
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM15 [MTK USB Port (COM15)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&61482&0&4#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 451D6F6481C40FAC136DBF31D4797268
Preparing device...
-- Success!
Preloader saved as : preloader_kg6_h6219_220105_181431.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MTK USB Port (COM15)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Platform : MT6765
Board : TECNO-KG6
Platform : mt6765
Userdata is ENCRYPTED
Formatting Userdata...
- Failed!
Trying Erase Method...
Verify Data Error
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.7]

Solution is:

- Erase FS

Br,
UMT

I have erased but still have fastboot mode

Envoyé de mon Infinix X682B en utilisant Tapatalk

Possible issue with firmware, may need to flash.

Br,
UMT