GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   HTC & PDA WM( With Touchscreen) (https://forum.gsmhosting.com/vbb/f98/)
-   -   HTC_Desire_616_dual_sim not powering after flash (https://forum.gsmhosting.com/vbb/f98/htc_desire_616_dual_sim-not-powering-after-flash-2114250/)

emezie 07-20-2016 18:57

HTC_Desire_616_dual_sim not powering after flash
 
pls i flashed HTC_Desire_616_dual_sim mtk based phone with infinity box, after the flashing, it refuse to power-on pls i help on what to do; see log below



Card found : S/N : B25B7C49 , v0130
Chinese Miracle II [MTK module] v 1.51

Operation : Check / Read Info [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048602A3CDDC416B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048602A3CDDC416B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xCA0D485BA9D02E9BF8A760C225C7F265
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done :( Erased phone or unsupported FlashIc?

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

emezie 07-23-2016 13:52

Quote:

Originally Posted by emezie (Post 11935910)
pls i flashed HTC_Desire_616_dual_sim mtk based phone with infinity box, after the flashing, it refuse to power-on pls i help on what to do; see log below



Card found : S/N : B25B7C49 , v0130
Chinese Miracle II [MTK module] v 1.51

Operation : Check / Read Info [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048602A3CDDC416B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048602A3CDDC416B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xCA0D485BA9D02E9BF8A760C225C7F265
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done :( Erased phone or unsupported FlashIc?

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!


Please support help me out, am still new here, how will I revive this phone?


All times are GMT +1. The time now is 10:39.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.08118 seconds with 6 queries

SEO by vBSEO