Gionee S5.1 Restarting on Logo - GSM-Forum

computer expert · 01-14-2016, 14:06

Hie friends

Today i will explain you how to Fix Gionee S5.1/ Walton X3mini or Gtel S5.5 Stuck on logo and keep on
rebooting itself.

General Cause and Troubleshooting

first of all note that:
1. Hard Reset
2. Full Flashing
3. Flashing Custom Recovery
4. Flashing Custom Rom
5. Formatting Via any Box eg. Miracle, Volcano or Piranha..
cannot fix that issue

Cause of this Problem according to my research is the charging connector that have been affected with water
or else moisture that's making short to it.

so tools you will need:
1. Hot Air Soldering Station
2. Razor Blade
3. Screw Drivers

now use hot air to heat the back cover and then use razor blade to open it, use remove all screws on the PCB
and Charging Connector and then now remove flex cable connecting PCB and Charging then remove the Charging Connector
replace it and your phone is Fixed permanent....replace all the screws and battery then back cover

Enjoy using your phone,

(C) 2016 Computer Experts| email:

shyamv335 · 01-17-2016, 20:25

Don't worry friends

U heating phone mmc ic or rebolling it
I sure

01-14-2016, 14:06	#1 (permalink)
computer expert Crazy Poster Join Date: Dec 2013 Location: Harare, Zimbabwe Posts: 58 Member: 2076822 Status: Offline Thanks Meter: 2	Gionee S5.1 Restarting on Logo Hie friends Today i will explain you how to Fix Gionee S5.1/ Walton X3mini or Gtel S5.5 Stuck on logo and keep on rebooting itself. General Cause and Troubleshooting first of all note that: 1. Hard Reset 2. Full Flashing 3. Flashing Custom Recovery 4. Flashing Custom Rom 5. Formatting Via any Box eg. Miracle, Volcano or Piranha.. cannot fix that issue Cause of this Problem according to my research is the charging connector that have been affected with water or else moisture that's making short to it. so tools you will need: 1. Hot Air Soldering Station 2. Razor Blade 3. Screw Drivers now use hot air to heat the back cover and then use razor blade to open it, use remove all screws on the PCB and Charging Connector and then now remove flex cable connecting PCB and Charging then remove the Charging Connector replace it and your phone is Fixed permanent....replace all the screws and battery then back cover Enjoy using your phone, (C) 2016 Computer Experts\| email: Last edited by MyGSM World; 01-23-2016 at 10:36. Reason: Email ID Removed.

01-17-2016, 20:25	#2 (permalink)
shyamv335 Junior Member Join Date: Sep 2014 Posts: 7 Member: 2252025 Status: Offline Thanks Meter: 1	Don't worry friends U heating phone mmc ic or rebolling it I sure