Tell me any Walton Android Phone problem.i will Try to solve it only in one hour

[biplobroy]

Walton Primo E7s no network/No Service problem after flashing the official firmware. Have you any solution about this problem?

[Gsm::Boiragi::]

Walton primo NH3 dead after flash please help

[jibonvai]

Try Thish Step
S2 Official Firmware, Flashtools & Drivers Download Link: Download


First: Install the driver

Please double-click on the program to install.

Program [GN_QC_EN_Driver_V1.1.0.0.exe]

Second: Download instructions


Before download, Need to check the following point:

Need to select USB connection mode to "Charge Mode" in order to identify the port and start downloading (The default USB connection mode is "Charge Mode").

Download tool： GNQC_DownLoadV1.6.8.0_EN.rar

After Downloading complete, please follow the steps：

1. Open GNQC_DownLoad flash tools

http://i.imgur.com/YjlTjSV.png
2. Click on the "BP Path" Button and "AP Path." Buttons and select BP and AP from software，Download mode drop-down(DL Mode) options is choose"General download (BP + AP)…
http://i.imgur.com/8doGQ4f.png
3. Connect Mobile with PC (Mobile must be remain off) and after found port then click download. Then start downloading…
http://i.imgur.com/JsFY5I9.png
4. Wait until the appears as shown in below figure,then the download is completed：
http://i.imgur.com/rGBtCFA.png
5. After the download completed, wait a few seconds, the phone automatically restart, the whole process is over。

6. To get all apps after on handset give the “Factory data reset”


I Hobe Solve Youre Problem Sir. And Knok Me Thanks.

Regard,
Jibonvai

[jibonvai]

Originally Posted by rajibsaha

Dear bro, plz help, another walton-primo S2 in my hand in patten lock. Try to hard reset but not sucess....
1.walton logo on screen
2.patten lock
Need 2phone perfect solution[step by step]...
plz help...

Try Thish Step
S2 Official Firmware, Flashtools & Drivers Download Link: Download


First: Install the driver

Please double-click on the program to install.

Program [GN_QC_EN_Driver_V1.1.0.0.exe]

Second: Download instructions


Before download, Need to check the following point:

Need to select USB connection mode to "Charge Mode" in order to identify the port and start downloading (The default USB connection mode is "Charge Mode").

Download tool： GNQC_DownLoadV1.6.8.0_EN.rar

After Downloading complete, please follow the steps：

1. Open GNQC_DownLoad flash tools

http://i.imgur.com/YjlTjSV.png
2. Click on the "BP Path" Button and "AP Path." Buttons and select BP and AP from software，Download mode drop-down(DL Mode) options is choose"General download (BP + AP)…
http://i.imgur.com/8doGQ4f.png
3. Connect Mobile with PC (Mobile must be remain off) and after found port then click download. Then start downloading…
http://i.imgur.com/JsFY5I9.png
4. Wait until the appears as shown in below figure,then the download is completed：
http://i.imgur.com/rGBtCFA.png
5. After the download completed, wait a few seconds, the phone automatically restart, the whole process is over。

6. To get all apps after on handset give the “Factory data reset”


I Hobe Solve Youre Problem Sir. And Knok Me Thanks.

Regard,
Jibonvai

[hassanzaheer]

walton primo v2 no service


after flash and hardreset signal comes on but after few seconds again emergency

Pls help

[mijanur_017]

Walton g9 flash error NV data crash solution please