eMMC Pro New Release V1.10 and New Models !
 

eMMC Pro 1.10 Release Notes

[12 AUGUST 2017]

We are trying to make more powerful eMMC software with every each update
There are alof of optimizations and progress based on customers requests and demands.

1. # Bug Fixed in the eMMC Size for over 64GB size.
2. # eMMC RPBM Resize can be set upto 8 MB Size
3. # eMMC BOOT Resize set-up can be 1MB , 2MB , 3MB , 4MB , 5 MB, 6MB , 8MB
4. # GP1,GP2,GP3,GP4 can be activated upto 40MB Sizes
5. # Samsung Factory Reset Added.
6. # Samsung S.M.A.R.T Report added
   

[Samsung Factory Reset]
Samsung Factory Reset Vendor CMDs and sequences implemented
Samsung Factory Reset will reset eMMC Configurations to factory state

[eMMC RPBM Resize:]
You can resize the eMMC RPMB Partition up-to 8MB different to 1.09 Expanded

[eMMC BOOT Resize:]
You can resize the eMMC BOOT Partition included 3MB , 5MB and 6MB different to 1.09 Expanded

[Samsung S.M.A.R.T Report]
Samsung S.M.A.R.T Report CMD's and sequences implemented which will show you the health of the Samsung eMMCs included Capacity , NAND BANKS , BAD Blocks of each BANKS

[GP1,GP2,GP3,GP4 Activating the Partitions :]
Resizing and activating GP1,GP2,GP3,GP4 partitions is important in some mobile phones contain this partitions .

For ex : it is critical to repair ASUS Zenfone

[New Models]

• # Lenovo S650 eMMC Dump [ World First ]
• # Lenovo S650 eMMC Pinouts [ World First ]
• # Lenovo S820 eMMC Dump
• # Lenovo S820 eMMC Pinouts
• # LG D723TR eMMC Dump [ World First ][ Thanks to Mathew_Di ]
• # LG D723TR eMMC Pinouts [ World First ][ Thanks to Mathew_Di ]
• # LG D724 eMMC Dump [ Thanks to Mathew_Di ]
• # LG D724 eMMC Pinouts [ Thanks to Mathew_Di ]
• # LG K10 eMMC Dump [ Thanks to Mathew_Di ]
• # LG K10 eMMC Pinouts [ Thanks to Mathew_Di ]
• # LG K430 eMMC Dump [ World First ][ Thanks to Mathew_Di ]
• # LG K430 eMMC Pinouts [ World First ][ Thanks to Mathew_Di ]
• # LG VS425 eMMC Dump
• # LG VS425 eMMC Pinouts
• # Samsung A7100 eMMC Dump [ World First ]
• # Samsung A7100 eMMC Pinouts [ World First ]
• # Samsung G532G eMMC Dump [ World First ]
• # Samsung G532G eMMC Pinouts [ World First ]
• # Samsung J120H eMMC Dump
• # Samsung J120H eMMC Pinouts
• # Samsung J200H eMMC Dump
• # Samsung J200H eMMC Pinouts
• # Samsung J510FN eMMC Dump [ World First ]
• # Samsung J510FN eMMC Pinouts [ World First ]
• # Samsung N915F eMMC Dump [ World First ]
• # Samsung N915F eMMC Pinouts [ World First ]
• # Samsung S120VL eMMC Dump [ World First ]
• # Samsung S120VL eMMC Pinouts [ World First ]
• # Sony Xperia C5 Ultra eMMC Dump [ World First ]
• # Sony Xperia C5 Ultra eMMC Pinouts [ World First ]
• # Samsung N915F eMMC Dump [ World First ] [ Thanks to Mathew_Di ]
• # Samsung N915F eMMC Pinouts [ World First ] [ Thanks to Mathew_Di ]
• # Vestel VSP250S eMMC Dump [ World First ] [ Thanks to Mathew_Di ]
• # Vestel VSP250S eMMC Pinouts [ World First ] [ Thanks to Mathew_Di ]
• # Vestel VSP250S eMMC Dump [ World First ] [ Thanks to Mathew_Di ]
• # Vestel VSP250S eMMC Pinouts [ World First ] [ Thanks to Mathew_Di ]
  

Thank you for all eMMC Pro Customers to keep sending us requests and suggestions .
There is a lot more to come

Best Regards
eMMC Pro Team

Advanced eMMC Repair
eMMC PRo - Universal Device Programmer

• www.eMMC-Pro.com

King emmc box emmc pro ;) thanx team ;)

hello sir can you add apple emmc to remove apple id or rapair bad emmc???

hello team emmc. I accidentally softerase this j100ml and the result is this now! can this have a solution?http://i1365.photobucket.com/albums/...ps4pn9ha2k.png

Thanks For Your Rocking Updates
 

Im Sure in very very near future you will be first choice of users for eMMC Programing in the GSM Repair world

New step
 

I just got my new emmc pro box today hopefully i will have successful journey with emmc pro

Thank you for this update hope you will add cherry phone and redimi 4i thank you

download link
 

pls provide new setup download link

please add on download via uttorent,

other downloading site please can't download the installer.
thank you sir for your immediate response..

easy emmc pin out for oppo a11w

Emmc firmware reading is not working. Software do nothing .

It's eMMC interface , will dpo everything related to eMMC / ISP business ..
iPhone has NAND inside .


Try writing boot1 and user area and set the boot-up condition to Boot1


Thanks

Redmi 4i is in the list , you can epext in next update .

You can download here

But after this , you should need to register and go to support area .


There is more to come :)

Support changes will be effected soon , we are developing new system included torrent .



You can download here

But after this , you should need to register and go to support area .


You will have probably a file in the folder : movi_0x00040000_0x00040000.bin after it is done but this function mostly internal use only for a while , new eMMCs signed and we do not let you write the firmware which is not embedded .

Phone work i.m unlock but after unlock deadboot i,m trying to repairing boot to emmc tools but not working help mi.
Help Mi G532g repair boot but not working

eMMC PRO
eMMC Pro - eMMC Programmer Version V1.10
FIRMWARE(0x4D41494E) version:2017052915210004
SN:6A460B0024049B80
eMMC Pro is Ready ..
Connect a Device and Click "Detect"
CID:0x90014A48 0x38473475 0x92011818 0x39363444
Manufacturer ID:0x90
Device/BGA:1 (removable:1 BGA:2 POP:3)
OEM/Application ID:0x4A
Product name:0x483847347592 (H8G4u’)
Product revision:0x01
Product serial number:0x18183936
Manufacturing date:0x34
CRC7 checksum:0x44
CSD:0xD0270132 0x0F5903FF 0xFFFFFFE7 0x8A40002A
CSD structure:0x3
System specification version:0x4
Data read access-time 1:0x27
Data read access-time 2:0x1
Max. bus clock frequency:0x32
Card command classes:0x0F5
Max. read data block length:0x9 (512)
Partial blocks for read allowed:0
Write block misalignment:0
Read block misalignment:0
DSR implemented:0
Device size:0xFFF
Min. read current @ VDD min:0x7
Max. read current @ VDD min:0x7
Min. write current @ VDD min:0x7
Max. write current @ VDD min:0x7
Device size multiplier:0x7
Erase group size:0x1F
Erase group size multiplier:0x1F
Write protect group size:0x7
Write protect group enable:1
Manufacturer default ECC:0
Write speed factor:2
Max. write data block length:0x9
Partial blocks for write allowed:0
Content protection application:0
File format group(R/W):0
Copy flag (OTP)(R/W):0
Permanent write protection(R/W):0
Temporary write protection(R/W):0
File format(R/W):0
ECC code(R/W):0
CRC(R/W):0x15
Not used, always ’1’:0
RCA:0x00000000
EXT_CSD information parsing:
FFU features:0x00
BOOT_SIZE_MULTI[226]:0x20
HC_ERASE_GRP_SIZE[224]:0x01
ERASE_TIMEOUT_MULT[223]:0x02
HC_WP_GRP_SIZE[221]:0x08
SEC_COUNT(EXT_CSD[215:212]:0x00E90000)
CARD_TYPE(EXT_CSD[196]):0x57
CSD_STRUCTURE(EXT_CSD[194]):0x02
EXT_CSD_REV(EXT_CSD[192]):0x07
PARTITION_CONFIG[179]:0x00
Device not boot enabled (default)
BOOT_CONFIG_PROT[178]:0x00
BOOT_BUS_CONDITIONS[177]:0x00
ERASE_GROUP_DEF[175]:0x00
BOOT_WP[173]:0x00
USER_WP[171]:0x00
FW_CONFIG[169]:0x00
RPMB_SIZE_MULT[168]:0x20
WR_REL_SET[167]:0x00
WR_REL_PARAM[166]:0x15
SANITIZE_START[165]:0x00
BKOPS_START[164]:0x00
BKOPS_EN[163]:0x00
RST_n_FUNCTION[162]:0x01
HPI_MGMT[161]:0x00
PARTITIONING_SUPPORT[160]:0x07
MAX_ENH_SIZE_MULT[159:157]:0x0003A4
PARTITIONS_ATTRIBUTE[156]:0x00
PARTITION_SETTING_COMPLETED[155]:0x01
GP_SIZE_MULT[154:143]:0x000000000000000000000000
ENH_SIZE_MULT[142:140]:0x000000
ENH_START_ADDR[139:136]:0x00000000
SEC_BAD_BLK_MGMNT[134]:0x00
PRODUCTION_STATE_AWARENESS[133]:0x00
TCASE_SUPPORT[132]:0x00
PERIODIC_WAKEUP[131]:0x0A
PROGRAM_CID_CSD_DDR_SUPPORT[130]:0x00
NATIVE_SECTOR_SIZE[63]:0x01
USE_NATIVE_SECTOR[62]:0x00
DATA_SECTOR_SIZE[61]:0x00
INI_TIMEOUT_EMU[60]:0x0A
Class6_CTRL[59]:0x00
DYNCAP_NEEDED[58]:0x00
EXCEPTION_EVENTS_CTRL[57:56]:0x00
EXCEPTION_EVENTS_STATUS[55:54]:0x00
EXT_PARTITIONS_ATTRIBUTE[53:52]:0x00
CONTEXT_CONF[51:37]:0x000000000000000000000000000000
PACKED_COMMAND_STATUS[36]:0x00
PACKED_FAILURE_INDEX[35]:0x00
POWER_OFF_NOTIFICATION[34]:0x00
CACHE_CTRL[33]:0x00
FLUSH_CACHE[32]:0x00
MODE_CONFIG[30]:0x00
MODE_OPERATION_CODES[29]:0x00
FFU_STATUS[26]:0x00
PRE_LOADING_DATA_SIZE[25:22]:0x00000000
MAX_PRE_LOADING_DATA_SIZE[21:18]:0x00
PRODUCT_STATE_AWARENESS_ENABLEMENT[17]:0x01
SECURE_REMOVAL_TYPE[16]:0x3B
Basic Information:
Extended CSD revision:
User Data Area Size: 7456MB(0x1D2000000)
Boot Partition Size: 4096KB
RPMB Size: 4096KB
General Purpose Partition 1 Size: 0KB
General Purpose Partition 2 Size: 0KB
General Purpose Partition 3 Size: 0KB
General Purpose Partition 4 Size: 0KB
Erase group size: 512KB
Writing Started...
Writing preloader1.bin ...
Writing pgpt.bin ...
Writing lk.bin ...
Writing secro.bin ...
Writing efuse.bin ...
Writing tee1.bin ...
Writing param.bin ...
Writing recovery.bin ...
Writing boot.bin ...
Writing md1img.bin ...
Writing md1dsp.bin ...
Writing Done !
CID:0x90014A48 0x38473475 0x92011818 0x39363444
Manufacturer ID:0x90
Device/BGA:1 (removable:1 BGA:2 POP:3)
OEM/Application ID:0x4A
Product name:0x483847347592 (H8G4u’)
Product revision:0x01
Product serial number:0x18183936
Manufacturing date:0x34
CRC7 checksum:0x44
CSD:0xD0270132 0x0F5903FF 0xFFFFFFE7 0x8A40002A
CSD structure:0x3
System specification version:0x4
Data read access-time 1:0x27
Data read access-time 2:0x1
Max. bus clock frequency:0x32
Card command classes:0x0F5
Max. read data block length:0x9 (512)
Partial blocks for read allowed:0
Write block misalignment:0
Read block misalignment:0
DSR implemented:0
Device size:0xFFF
Min. read current @ VDD min:0x7
Max. read current @ VDD min:0x7
Min. write current @ VDD min:0x7
Max. write current @ VDD min:0x7
Device size multiplier:0x7
Erase group size:0x1F
Erase group size multiplier:0x1F
Write protect group size:0x7
Write protect group enable:1
Manufacturer default ECC:0
Write speed factor:2
Max. write data block length:0x9
Partial blocks for write allowed:0
Content protection application:0
File format group(R/W):0
Copy flag (OTP)(R/W):0
Permanent write protection(R/W):0
Temporary write protection(R/W):0
File format(R/W):0
ECC code(R/W):0
CRC(R/W):0x15
Not used, always ’1’:0
RCA:0x00000000
EXT_CSD information parsing:
FFU features:0x00
BOOT_SIZE_MULTI[226]:0x20
HC_ERASE_GRP_SIZE[224]:0x01
ERASE_TIMEOUT_MULT[223]:0x02
HC_WP_GRP_SIZE[221]:0x08
SEC_COUNT(EXT_CSD[215:212]:0x00E90000)
CARD_TYPE(EXT_CSD[196]):0x57
CSD_STRUCTURE(EXT_CSD[194]):0x02
EXT_CSD_REV(EXT_CSD[192]):0x07
PARTITION_CONFIG[179]:0x00
Device not boot enabled (default)
BOOT_CONFIG_PROT[178]:0x00
BOOT_BUS_CONDITIONS[177]:0x00
ERASE_GROUP_DEF[175]:0x00
BOOT_WP[173]:0x00
USER_WP[171]:0x00
FW_CONFIG[169]:0x00
RPMB_SIZE_MULT[168]:0x20
WR_REL_SET[167]:0x00
WR_REL_PARAM[166]:0x15
SANITIZE_START[165]:0x00
BKOPS_START[164]:0x00
BKOPS_EN[163]:0x00
RST_n_FUNCTION[162]:0x01
HPI_MGMT[161]:0x00
PARTITIONING_SUPPORT[160]:0x07
MAX_ENH_SIZE_MULT[159:157]:0x0003A4
PARTITIONS_ATTRIBUTE[156]:0x00
PARTITION_SETTING_COMPLETED[155]:0x01
GP_SIZE_MULT[154:143]:0x000000000000000000000000
ENH_SIZE_MULT[142:140]:0x000000
ENH_START_ADDR[139:136]:0x00000000
SEC_BAD_BLK_MGMNT[134]:0x00
PRODUCTION_STATE_AWARENESS[133]:0x00
TCASE_SUPPORT[132]:0x00
PERIODIC_WAKEUP[131]:0x0A
PROGRAM_CID_CSD_DDR_SUPPORT[130]:0x00
NATIVE_SECTOR_SIZE[63]:0x01
USE_NATIVE_SECTOR[62]:0x00
DATA_SECTOR_SIZE[61]:0x00
INI_TIMEOUT_EMU[60]:0x0A
Class6_CTRL[59]:0x00
DYNCAP_NEEDED[58]:0x00
EXCEPTION_EVENTS_CTRL[57:56]:0x00
EXCEPTION_EVENTS_STATUS[55:54]:0x00
EXT_PARTITIONS_ATTRIBUTE[53:52]:0x00
CONTEXT_CONF[51:37]:0x000000000000000000000000000000
PACKED_COMMAND_STATUS[36]:0x00
PACKED_FAILURE_INDEX[35]:0x00
POWER_OFF_NOTIFICATION[34]:0x00
CACHE_CTRL[33]:0x00
FLUSH_CACHE[32]:0x00
MODE_CONFIG[30]:0x00
MODE_OPERATION_CODES[29]:0x00
FFU_STATUS[26]:0x00
PRE_LOADING_DATA_SIZE[25:22]:0x00000000
MAX_PRE_LOADING_DATA_SIZE[21:18]:0x00
PRODUCT_STATE_AWARENESS_ENABLEMENT[17]:0x01
SECURE_REMOVAL_TYPE[16]:0x3B
Basic Information:
Extended CSD revision:
User Data Area Size: 7456MB(0x1D2000000)
Boot Partition Size: 4096KB
RPMB Size: 4096KB
General Purpose Partition 1 Size: 0KB
General Purpose Partition 2 Size: 0KB
General Purpose Partition 3 Size: 0KB
General Purpose Partition 4 Size: 0KB
Erase group size: 512KB
Writing Started...
Writing preloader.img ...
Writing gpt.bin ...
Writing pit.bin ...
Writing lk.bin ...
Writing efuse.img ...
Writing trustzone.bin ...
Writing param.bin ...
Writing Done !
Writing Started...
Writing preloader.img ...
Writing gpt.bin ...
Writing pit.bin ...
Writing lk.bin ...
Writing efuse.img ...
Writing trustzone.bin ...
Writing param.bin ...
Writing Done !