GSM-Forum - eMMC Pro V1.06 Release Notes

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- GSMFABRICA Products (https://forum.gsmhosting.com/vbb/f988/)

- - eMMC Pro V1.06 Release Notes (https://forum.gsmhosting.com/vbb/f988/emmc-pro-v1-06-release-notes-2124877/)

eMMC Pro V1.06 Release Notes

eMMC Pro V1.06
[19 AUG 2016]

Description :

eMMC Pro V1.06 Release Notes

eMMC Pro V1.06 Release Notes

Detecting eMMC Controls added
Errors and Handling
Writing to Fake I/O Bug is fixed.
Error Codes

Error Messages and Handling ;

Code:

CMD_CRC_FAIL                            =        (1)          which is Command response received (but CRC check failed)

DATA_CRC_FAIL                           =        (2)          which is Data bock sent/received (CRC check Failed)

CMD_RSP_TIMEOUT                         =        (3)          which is Command response timeout

DATA_TIMEOUT                            =        (4)          which is Data time out

TX_UNDERRUN                             =        (5)          which is Transmit FIFO under-run

RX_OVERRUN                              =        (6)          which is Receive FIFO over-run

START_BIT_ERR                           =        (7)          which is Start bit not detected on all data signals in widE bus mode

CMD_OUT_OF_RANGE                        =        (8)          which is CMD's argument was out of range

ADDR_MISALIGNED                         =        (9)          which is Misaligned address

BLOCK_LEN_ERR                           =        (10)         which is Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length

ERASE_SEQ_ERR                           =        (11)         which is An error in the sequence of erase command occurs

BAD_ERASE_PARAM                         =        (12)         which is An Invalid selection for erase groups

WRITE_PROT_VIOLATION                    =        (13)         which is Attempt to program a write protect block

LOCK_UNLOCK_FAILED                      =        (14)         which is Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card

COM_CRC_FAILED                          =        (15)         which is CRC check of the previous command failed

ILLEGAL_CMD                             =        (16)         which is Command is not legal for the card state

CARD_ECC_FAILED                         =        (17)         which is Card internal ECC was applied but failed to correct the data

CC_ERROR                                =        (18)         which is Internal card controller error

GENERAL_UNKNOWN_ERROR                   =        (19)         which is General or Unknown error

STREAM_READ_UNDERRUN                    =        (20)         which is The card could not sustain data transfer in stream read operation.

STREAM_WRITE_OVERRUN                    =        (21)         which is The card could not sustain data programming in stream mode

CID_CSD_OVERWRITE                       =        (22)         which is CID/CSD overwrite error

WP_ERASE_SKIP                           =        (23)         which is only partial address space was erased

CARD_ECC_DISABLED                       =        (24)         which is Command has been executed without using internal ECC

ERASE_RESET                             =        (25)         which is Erase sequence was cleared before executing because an out of erase sequence command was received

AKE_SEQ_ERROR                           =        (26)         which is Error in sequence of authentication.

INVALID_VOLTRANGE                       =        (27)        

ADDR_OUT_OF_RANGE                       =        (28)        

SWITCH_ERROR                            =        (29)        

SDIO_DISABLED                           =        (30)        

SDIO_FUNCTION_BUSY                      =        (31)        

SDIO_FUNCTION_FAILED                    =        (32)        

SDIO_UNKNOWN_FUNCTION                   =        (33)

Standard errors and messages ;

Code:

INTERNAL_ERROR                          =        (34)        

NOT_CONFIGURED                          =        (35)        

REQUEST_PENDING                         =        (36)        

REQUEST_NOT_APPLICABLE                  =        (37)        

INVALID_PARAMETER                       =        (38)        

UNSUPPORTED_FEATURE                     =        (39)        

UNSUPPORTED_HW                          =        (40)        

ERROR                                   =        (41)        

OK                                      =        (42)        

CMD1_TIMEOUT                            =        (60)

Advanced eMMC Repair
eMMC PRo - Universal Device Programmer

www.eMMC-Pro.com

add adb read file to bacup

ADB Dumping free for everybody for a long time .

its too easy actually , AndroidLib.dll
All others using smiliar library for the Tools ..

Some free software let me give you if you guys can make use of it .

:p

it is possible to repair htc 516 and micromax A121 boot repair (both are qualcomm) with this box...

b/r
Kamal

Quote:

Originally Posted by kamal_singla (Post 11993753)

it is possible to repair htc 516 and micromax A121 boot repair with this box...

b/r
Kamal

Is it Desire 500 ?

Br
Oz.

Quote:

Originally Posted by kamal_singla (Post 11993753)

it is possible to repair htc 516 and micromax A121 boot repair (both are qualcomm) with this box...

b/r
Kamal

Micromax A121 - if i can buy one phone ! i will deliver solution .
Desire 516 not in my hand but in my list now !
and Desire 500 ( 0P3Z200 ) next week :p

Best Regards
Oz.

Quote:

Originally Posted by ngocdiemmobile (Post 11993711)

add adb read file to bacup

Quote:

Originally Posted by Electroboys (Post 11993734)

This means

You can dump by USB and you can use these dumps with eMMC Pro to revive dead devices .

Phones should be rooted and busybox installed .

Best Regards
F4T0N

Quote:

Originally Posted by Electroboys (Post 11993764)

Micromax A121 - if i can buy one phone ! i will deliver solution .
Desire 516 not in my hand but in my list now !
and Desire 500 ( 0P3Z200 ) next week :p

Best Regards
Oz.

I have micromax A121 if you need any help with team viewer/ammy admin i can..

Quote:

Originally Posted by kamal_singla (Post 11993918)

I have micromax A121 if you need any help with team viewer/ammy admin i can..

Appreciated your collaboration efforts .
But I can't Dig eMMC pinouts by remotely ;)

Best regards
Oz

emmc can you add htc 616 616h 816 320 or oppo r1001 r831 r8106 r2001 r827 emmc repair

Thanks we will haunt these models one by one

Best regards
F4T0N

hi pleas hilp
Resource Limit Is Reached

The website is temporarily unable to service your request as it exceeded resource limit. Please try again later.

Quote:

Originally Posted by askjour (Post 11995776)

hi pleas hilp
Resource Limit Is Reached

The website is temporarily unable to service your request as it exceeded resource limit. Please try again later.

Web upgrade is in progress

Best regards
Oz

Quote:

Originally Posted by FAT-ON (Post 11994918)

Thanks we will haunt these models one by one

Best regards
F4T0N

They use MTK chipset, so I think will have unique method to work with emmc like spflashtool. (MTK scatter txt)

Quote:

Originally Posted by FAT-ON (Post 11994918)

Thanks we will haunt these models one by one

Best regards
F4T0N

They use MTK chipset, so I think will have unique method to work with emmc like spflashtool. (MTK scatter txt)