N7000 write file fail

[089999945]

connect with emmc is work well but write fail

www.emmc-pro.com
eMMC Pro - eMMC Programmer Version V1.09
FIRMWARE(0x4D41494E) version:2017052915210004
SN:0C4BAD7xxxxxxxxx
eMMC Pro is Ready ..
Connect a Device and Click "Detect"
CID:0x15010056 0x594C3030 0x4D191B1B 0x7C262F90
  Manufacturer ID:0x15
  Device/BGA:1 (removable:1 BGA:2 POP:3)
  OEM/Application ID:0x00
  Product name:0x56594C30304D (VYL00M)
  Product revision:0x19
  Product serial number:0x1B1B7C26
  Manufacturing date:0x2F
  CRC7 checksum:0x90
CSD:0xD0270132 0x0F5903FF 0xF6DBFFEF 0x8A404066
  CSD structure:0x3
  System specification version:0x4
  Data read access-time 1:0x27
  Data read access-time 2:0x1
  Max. bus clock frequency:0x32
  Card command classes:0x0F5
  Max. read data block length:0x9 (512)
  Partial blocks for read allowed:0
  Write block misalignment:0
  Read block misalignment:0
  DSR implemented:0
  Device size:0xFFF
  Min. read current @ VDD min:0x6
  Max. read current @ VDD min:0x6
  Min. write current @ VDD min:0x6
  Max. write current @ VDD min:0x6
  Device size multiplier:0x7
  Erase group size:0x1F
  Erase group size multiplier:0x1F
  Write protect group size:0xF
  Write protect group enable:1
  Manufacturer default ECC:0
  Write speed factor:2
  Max. write data block length:0x9
  Partial blocks for write allowed:0
  Content protection application:0
  File format group(R/W):0
  Copy flag (OTP)(R/W):1
  Permanent write protection(R/W):0
  Temporary write protection(R/W):0
  File format(R/W):0
  ECC code(R/W):0
  CRC(R/W):0x33
  Not used, always ’1’:0
RCA:0x00000000
EXT_CSD information parsing:
FFU features:0x00
BOOT_SIZE_MULTI[226]:0x04
HC_ERASE_GRP_SIZE[224]:0x01
ERASE_TIMEOUT_MULT[223]:0x01
SEC_COUNT(EXT_CSD[215:212]:0x01D5A000)
CARD_TYPE(EXT_CSD[196]):0x07
CSD_STRUCTURE(EXT_CSD[194]):0x02
EXT_CSD_REV(EXT_CSD[192]):0x05
PARTITION_CONFIG[179]:0x00
 Device not boot enabled (default)
BOOT_CONFIG_PROT[178]:0x00
BOOT_BUS_CONDITIONS[177]:0x01
ERASE_GROUP_DEF[175]:0x00
BOOT_WP[173]:0x00
USER_WP[171]:0x00
FW_CONFIG[169]:0x00
RPMB_SIZE_MULT[168]:0x01
WR_REL_SET[167]:0x1F
WR_REL_PARAM[166]:0x05
SANITIZE_START[165]:0x00
BKOPS_START[164]:0x00
BKOPS_EN[163]:0x00
RST_n_FUNCTION[162]:0x00
HPI_MGMT[161]:0x00
PARTITIONING_SUPPORT[160]:0x03
MAX_ENH_SIZE_MULT[159:157]:0x000380
PARTITIONS_ATTRIBUTE[156]:0x00
PARTITION_SETTING_COMPLETED[155]:0x00
GP_SIZE_MULT[154:143]:0x000000000000000000000000
ENH_SIZE_MULT[142:140]:0x000000
ENH_START_ADDR[139:136]:0x00000000
SEC_BAD_BLK_MGMNT[134]:0x00
PRODUCTION_STATE_AWARENESS[133]:0x00
TCASE_SUPPORT[132]:0x00
PERIODIC_WAKEUP[131]:0x00
PROGRAM_CID_CSD_DDR_SUPPORT[130]:0x00
NATIVE_SECTOR_SIZE[63]:0x00
USE_NATIVE_SECTOR[62]:0x00
DATA_SECTOR_SIZE[61]:0x00
INI_TIMEOUT_EMU[60]:0x00
Class6_CTRL[59]:0x00
DYNCAP_NEEDED[58]:0x00
EXCEPTION_EVENTS_CTRL[57:56]:0x00
EXCEPTION_EVENTS_STATUS[55:54]:0x00
EXT_PARTITIONS_ATTRIBUTE[53:52]:0x00
CONTEXT_CONF[51:37]:0x000000000000000000000000000000
PACKED_COMMAND_STATUS[36]:0x00
PACKED_FAILURE_INDEX[35]:0x00
POWER_OFF_NOTIFICATION[34]:0x00
CACHE_CTRL[33]:0x00
FLUSH_CACHE[32]:0x00
MODE_CONFIG[30]:0x00
MODE_OPERATION_CODES[29]:0x00
FFU_STATUS[26]:0x00
PRE_LOADING_DATA_SIZE[25:22]:0x00000000
MAX_PRE_LOADING_DATA_SIZE[21:18]:0x00
PRODUCT_STATE_AWARENESS_ENABLEMENT[17]:0x00
SECURE_REMOVAL_TYPE[16]:0x00
Basic Information:
Extended CSD revision: Revision 1.5 (MMC v4.41)
User Data Area Size: 15028MB(0x3AB400000)
Boot Partition Size: 512KB
RPMB Size: 128KB
General Purpose Partition 1 Size: 0KB
General Purpose Partition 2 Size: 0KB
General Purpose Partition 3 Size: 0KB
General Purpose Partition 4 Size: 0KB
Erase group size: 512KB

only USER Data can't be write
what problem? pls help me

[089999945]

where supporter? im watting u near 1 day
pls help me

[FAT-ON]

Originally Posted by 089999945

where supporter? im watting u near 1 day
pls help me

It looks like not reliable NAND
You can try to do with Deep Erase and Write Dump.

Best Regards
F4T0N

[089999945]

Originally Posted by FAT-ON

It looks like not reliable NAND
You can try to do with Deep Erase and Write Dump.

Best Regards
F4T0N

ready with deep erase still same.

[Sniper_04]

Change the emmc...
Since i repairing/changing emmc if like that, have error, cannot access boot1-2 even you successfully repair the emmc surely 1week to 1month only the problem will comeback


Sent from my iPhone using Tapatalk