poco m3 Dead ! qdloader 9008 - GSM-Forum

mesour.m · 09-04-2021, 15:25

i took my first poco m3 two month ago and i tried to fix it but whatever i did was not good enough and the phone came back with the same problem .
i have been trying since and it could not solve the problem . i have tried these solution on many devices maybe near to 70 .
these are what i have done since today

1. hit the power ic (PMI632-902)
2. changed the PMI632-902
3. the ic temperature is about 100' degree while fast charging so i tried one ic with no fast charge (PMI632-502) and tried to cool it down
4. reball the CPU and UFS memory
5. flash with hydra, UMT , UFI and even with auth account
6. made OVP jumper
7. tried to format UFS memory and write dump again by EasyJtag and Medusa pro II

everything i did was useless and the problem comes back in a few days .
is there any solution to this ISSUE caused by XIAOMI team ??
and they do not give any answer to this

sebouh · 09-16-2021, 15:47

hi i have 2 phones with the same problem
I think there is no solution

celltellpb · 09-17-2021, 13:07

https://www.youtube.com/watch?v=J8kFdOPonds ....

abil_jef · 10-06-2021, 14:21

https://www.instagram.com/p/CUsDeP4D...um=share_sheet

ryzaryzen2020 · 10-21-2021, 03:14

no solution its a board issue

PiratesGSMKing · 10-30-2021, 15:22

Just Disconnect betray Connector , after it Charge Full betray 100% Working

HK-9047 · 11-26-2021, 09:21

sir poco m3 power on but automatic on/off

nep.malabanan · 12-05-2021, 14:08

Hello guys,

This solved the deadboot issue on my end.

Just remove the capacitor encircled below and you will then be able to reboot your unit freely.

Thanks!

**chand_gee** · 12-20-2021, 14:35

Quote:

Originally Posted by mesour.m

i took my first poco m3 two month ago and i tried to fix it but whatever i did was not good enough and the phone came back with the same problem .
i have been trying since and it could not solve the problem . i have tried these solution on many devices maybe near to 70 .
these are what i have done since today

1. hit the power ic (PMI632-902)
2. changed the PMI632-902
3. the ic temperature is about 100' degree while fast charging so i tried one ic with no fast charge (PMI632-502) and tried to cool it down
4. reball the CPU and UFS memory
5. flash with hydra, UMT , UFI and even with auth account
6. made OVP jumper
7. tried to format UFS memory and write dump again by EasyJtag and Medusa pro II

everything i did was useless and the problem comes back in a few days .
is there any solution to this ISSUE caused by XIAOMI team ??
and they do not give any answer to this

hope someone will catch the ant.....
[IMG]

[/IMG]

09-04-2021, 15:25	#1 (permalink)
mesour.m Junior Member Join Date: May 2016 Posts: 2 Member: 2570917 Status: Offline Thanks Meter: 3	poco m3 Dead ! qdloader 9008 i took my first poco m3 two month ago and i tried to fix it but whatever i did was not good enough and the phone came back with the same problem . i have been trying since and it could not solve the problem . i have tried these solution on many devices maybe near to 70 . these are what i have done since today 1. hit the power ic (PMI632-902) 2. changed the PMI632-902 3. the ic temperature is about 100' degree while fast charging so i tried one ic with no fast charge (PMI632-502) and tried to cool it down 4. reball the CPU and UFS memory 5. flash with hydra, UMT , UFI and even with auth account 6. made OVP jumper 7. tried to format UFS memory and write dump again by EasyJtag and Medusa pro II everything i did was useless and the problem comes back in a few days . is there any solution to this ISSUE caused by XIAOMI team ?? and they do not give any answer to this

09-16-2021, 15:47	#2 (permalink)
sebouh Crazy Poster Join Date: Feb 2006 Location: armenia Posts: 51 Member: 233242 Status: Offline Sonork: www.sonork.com Thanks Meter: 5	poco m3 Dead hi i have 2 phones with the same problem I think there is no solution

09-17-2021, 13:07	#3 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	https://www.youtube.com/watch?v=J8kFdOPonds ....

10-06-2021, 14:21	#4 (permalink)
abil_jef Junior Member Join Date: Nov 2008 Posts: 24 Member: 913338 Status: Offline Thanks Meter: 6	https://www.instagram.com/p/CUsDeP4D...um=share_sheet

10-21-2021, 03:14	#5 (permalink)
ryzaryzen2020 Freak Poster Join Date: Jun 2020 Location: masachusets Posts: 206 Member: 2958818 Status: Offline Thanks Meter: 25	no solution its a board issue

10-30-2021, 15:22	#6 (permalink)
PiratesGSMKing Freak Poster Join Date: Feb 2017 Location: Pakistan Posts: 376 Member: 2684815 Status: Offline Thanks Meter: 133	Just Disconnect betray Connector , after it Charge Full betray 100% Working

11-26-2021, 09:21	#7 (permalink)
HK-9047 Junior Member Join Date: Feb 2012 Posts: 1 Member: 1725869 Status: Offline Sonork: 100.1613228 Thanks Meter: 0	sir poco m3 power on but automatic on/off