Dead xx65,xx72,xx75 after unlock solution here!!! - GSM-Forum

edcentec · 03-06-2006, 19:01

--------------------------------------------------------------------------------

Step by step, mobile dead after unlock:

1 - Puts the telephone in " service mode " with the "papua utilits"
2 - Closes " papua " and open the " eeprom tools ".
3 - Click in "load" and open the corretly file.(model and version)
4 - Proceed the remaining steps (7) as display the illustration(Attached).
5 - Closes eeprom tools.
6 - Open "papua" go to " flash ", mark "pause" and " recalculate keys in flash "
(two other options will mark, leave how it is)
7 - With test point clicks in " DO JOB " it removes test point in 2 seconds,
wait the end of the process.
8 - Power on, Mobile lives again!

If need, calculate the " keys " make this before to start the process,
and " enter in skey in phone"(how to unlock)

Regards,

edcentec · 03-06-2006, 19:15

use this files and seek my steeps

BB-gsm · 03-06-2006, 21:01

Hmmm ...

The steps 1,2,3,4 and 5 can be removed

(attachment also !!)

Everyone who knows how to unlock x65, he knows this,

It is same as IMEI repairing on E-Gold based siemens phones ("Repair" button in SST .. etc)

Regards,
B

gsmkiss · 03-06-2006, 21:21

Please is there any eeprom for c6v version 08 or 25 (eeprom damaged).
Thank you in advance
BR

edcentec · 03-07-2006, 19:49

Quote:

Originally Posted by BB-gsm

Hmmm ...

The steps 1,2,3,4 and 5 can be removed

(attachment also !!)

Everyone who knows how to unlock x65, he knows this,

It is same as IMEI repairing on E-Gold based siemens phones ("Repair" button in SST .. etc)

Regards,
B

BB, sometime eeprom is damaged fully, olnly full eeprom write works, this is a free solution for free unlockers, seek all steeps.
excuse my english.

MR PROTEC · 03-08-2006, 04:02

bb- gsm .... is right if mobile dead withen jafa method

edcentec .... is right at all

wbr

elcapitel · 03-15-2006, 15:25

@edcentec
Thanks. Tested with the c65 eeprom full+lite v50.

good method for repair c65 dead.

maurohial · 03-29-2006, 18:19

i need help

dont save de eeprom , display this erroR
---------------------------
Siemens EEPROM tool
---------------------------
Error ?15 (WBlockInfoQuery) while writing block ? 5008...

You can retry writing, skip this block or abort whole writing process.
---------------------------
Anular Reintentar Omitir
---------------------------

pls help is from a *******r
thanks

edcentec · 04-02-2006, 19:40

clicks in "ignore" to all.

edcentec · 04-02-2006, 19:45

Or, erase eefull + eelite with papuas an retry write eeprom with "eeprom-toosl" , if error: cliks "ignore" to all. its works!
regards.

alsabahi_team · 04-04-2006, 00:00

Quote:

Originally Posted by MR PROTEC

bb- gsm .... is right if mobile dead withen jafa method

edcentec .... is right at all

wbr

this is the most easy and safe wat to unlock x65

thk man

we hope more details in fourm to help all user

edcentec · 04-20-2006, 09:26

Quote:

Originally Posted by alsabahi_team

this is the most easy and safe wat to unlock x65

thk man

we hope more details in fourm to help all user

Correcting , unlocking and bad unlock repair........ regards from brazil!!!!!!!!

gerson · 05-28-2006, 05:21

@edcentec
hello, i have a dead cf76 v17 i tried to repair for all methods but i cant, i see your guide but in the eeprom zip file isnt the .eep file for this phone and model i dont know how to get it, can u help me??

tnx

virgix · 06-05-2006, 18:27

How about CX70 dead after format FFS_C With Papuas or anybody have eep for this phone please share.............

virgix · 06-05-2006, 18:33

I try using winswup but after 33% program stop....and using Official update from siemens program say update progress stopped by phone.....any ide...????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
j700v no network after unlock solution Here .....	DeDo Gsm1911	UST Pro II	34	08-24-2010 23:03
how to repair damage e8 after unlocking????solution here	shoktong	MSS Box II	6	07-16-2010 09:53
Dead 6680 through flashing?? LOOK in SOLUTION HERE 100%	The Dog	Nokia Base Band 5 ( BB-5 )	15	05-19-2009 15:11
E1070 dead after unlock log here :	pepik	Smart-Clip	7	03-28-2007 08:30
t630 no network after downgrade solution here	2xxu	Sony Ericsson	1	05-13-2005 08:34

03-06-2006, 21:01	#3 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 722	Hmmm ... The steps 1,2,3,4 and 5 can be removed (attachment also !!) Everyone who knows how to unlock x65, he knows this, It is same as IMEI repairing on E-Gold based siemens phones ("Repair" button in SST .. etc) Regards, B

03-06-2006, 21:21	#4 (permalink)
gsmkiss Freak Poster Join Date: Jun 2002 Location: TUNISIA Age: 53 Posts: 316 Member: 12550 Status: Offline Thanks Meter: 1	Please is there any eeprom for c6v version 08 or 25 (eeprom damaged). Thank you in advance BR

03-08-2006, 04:02	#6 (permalink)
MR PROTEC No Life Poster Join Date: Oct 2004 Location: CAIRO _ @ _ 112 _ -= EMERGENCY ROOM =- Age: 48 Posts: 1,454 Member: 86655 Status: Offline Thanks Meter: 385	bb- gsm .... is right if mobile dead withen jafa method edcentec .... is right at all wbr

03-15-2006, 15:25	#7 (permalink)
elcapitel No Life Poster Join Date: Jul 2005 Location: zunZun Team Age: 43 Posts: 10,185 Member: 166270 Status: Offline Sonork: 100.1579747 Thanks Meter: 12,673	@edcentec Thanks. Tested with the c65 eeprom full+lite v50. good method for repair c65 dead.

03-29-2006, 18:19	#8 (permalink)
maurohial Insane Poster Join Date: Nov 2005 Posts: 81 Member: 196390 Status: Offline Thanks Meter: 2	i need help dont save de eeprom , display this erroR --------------------------- Siemens EEPROM tool --------------------------- Error ?15 (WBlockInfoQuery) while writing block ? 5008... You can retry writing, skip this block or abort whole writing process. --------------------------- Anular Reintentar Omitir --------------------------- pls help is from a *******r thanks

04-02-2006, 19:40	#9 (permalink)
edcentec No Life Poster Join Date: Feb 2006 Location: Brazil Posts: 1,069 Member: 232960 Status: Offline Thanks Meter: 419	clicks in "ignore" to all.

04-02-2006, 19:45	#10 (permalink)
edcentec No Life Poster Join Date: Feb 2006 Location: Brazil Posts: 1,069 Member: 232960 Status: Offline Thanks Meter: 419	Or, erase eefull + eelite with papuas an retry write eeprom with "eeprom-toosl" , if error: cliks "ignore" to all. its works! regards.

05-28-2006, 05:21	#13 (permalink)
gerson Junior Member Join Date: Feb 2005 Age: 40 Posts: 4 Member: 120920 Status: Offline Thanks Meter: 0	@edcentec hello, i have a dead cf76 v17 i tried to repair for all methods but i cant, i see your guide but in the eeprom zip file isnt the .eep file for this phone and model i dont know how to get it, can u help me?? tnx

06-05-2006, 18:27	#14 (permalink)
virgix Freak Poster Join Date: Jun 2004 Location: Indonesia Posts: 466 Member: 69608 Status: Offline Thanks Meter: 63	How about CX70 dead after format FFS_C With Papuas or anybody have eep for this phone please share.............

06-05-2006, 18:33	#15 (permalink)
virgix Freak Poster Join Date: Jun 2004 Location: Indonesia Posts: 466 Member: 69608 Status: Offline Thanks Meter: 63	I try using winswup but after 33% program stop....and using Official update from siemens program say update progress stopped by phone.....any ide...????