Repair manual for downgraded 1112, 2310 and 2610 - GSM-Forum

SoftMobile · 11-15-2006, 17:17

Nokia 1112

Start MTB NK software
Select erase_1112.flf as PPM file (dont select MCU and CP file)
press Flash button
Now full flash the phone
After flash go to Extras and EEPROM (PMM) Read/Write
load PM file and press Write all
Set phone to factory default
Now unlock the phone

Nokia 2310

How to repair Contact service or repair downgraded 2310 to 1600 and add Radio feature again to it.

Start MTB NK software
Check Extras and select Custom erase
in field Our goes to security EEPROM area enter address

013f0000 013fffff

Press Erase selected

this operation will take 5-7 seconds

Now full flash the phone
After flash go to Extras and EEPROM (PMM) Read/Write
load PM file and press Write all
Set phone to factory default
Now unlock the phone

Nokia 2610

Start MTB NK software
Select 2610rh86_87__03.71.mcuswERZ as MCU file (dont select PPM and CP file)
press Flash button
Now full flash the phone
After flash go to Extras and EEPROM (PMM) Read/Write
load PM file and press Write all
Set phone to factory default
Now unlock the phone

How to check it is phone sim lock data ok or no:

Click on Sim lock status button and if there is some strange details use repair way before unlock it.

The repair files are attached

VELIKI · 11-15-2006, 17:50

if i am not wrong than must i flah 1112 with 5.03 than pm 1112-5.03ok and than 1112-900mhz or can i doit in 5.53 or???how

SoftMobile · 11-15-2006, 18:03

The versions in PM files does not mater.
You can use these PM files with any software version.

VELIKI · 11-15-2006, 18:10

Phone is in: Test mode
Model: RH-93 ( N1112)
V 5.53/20-07-06/RH-93 (c) NMP
Production serial number VF2960232
Product code 0532991
Module code 0203167
Basic production code 0532665
Flash code
Order number
Long production SN
MCU SW V 5.53/20-07-06/RH-93/(c) NMP
HW 0502
PCI
UEM 1314
UPP 8705
RFIC 0500
DSP P05w06.v34
LCD INLUX:SYRS00
PPM V 5.53/20-07-06/RH-93/(c) NMP/ED
ADSP SW p%V 5.53\n20-07-06\nRH-93\n(c) NMP\ned
IMEI: 352298014810810
Phone is in: Test mode
Imei: 352298014810810
Info OK
Connect...
Resp:
o/0110/hello there
Login...
OK, available count
2;
busy, waiting...
V 5.53/20-07-06/RH-93 (c) NMP
IMEI: 352298014810810
Operator: 0010100000000000
Profile bits: 0000000000010002
Sim Status: Not locked
FINISHED OK

THANKS FOR HELP!!!!!!!!!!!!!!!!

sunny_cool · 11-17-2006, 08:32

Is IMIE starting with 0 is the problem...Please help

Thanks in advance

Processing File: rh93_05.500
Boot...
ASIC ID: 2201
DCT4
u_2nd.fia
u_amd.fia
849EBF8065781C4FBA087C02CB4B
Configuration Info (9F):
Number of Flashes: 2
01000000: Amd, 0001 2A7E 0024 0111, 10
02000000: NotUsed, 0000 0001 0000 0000, 0
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[4.31 MB]...
erasing region [01000000 to 0100FFFF]
erasing region [01010000 to 013BFFFF]
erasing region [013C0000 to 013EFFFF]
erasing region [017C0000 to 017EFFFF]
erasing region [01FC0000 to 01FEFFFF]
in 28.53s
Flash[1.89 MB]...in 7.67s
* * Processed file in 44.59 seconds
Processing File: rh930_nai5.50aa
Low level format...OK
Boot...
ASIC ID: 2201
DCT4
u_2nd.fia
u_amd.fia
84FAFF4CA7E284633FFBA220CEFC
Configuration Info (9F):
Number of Flashes: 2
01000000: Amd, 0001 2A7E 0024 0111, 10
02000000: NotUsed, 0000 0001 0000 0000, 0
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[0.25 MB]...
erasing region [01380000 to 013BFFFF]
in 1.84s
Flash[0.16 MB]...in 0.66s
* * Processed file in 15.69 seconds
Extract content...OK
Processing File: rh93_05.50aa
Boot...
ASIC ID: 2201
DCT4
u_2nd.fia
u_amd.fia
849EBF8065781C4FBA087C02CB4B
Configuration Info (9F):
Number of Flashes: 2
01000000: Amd, 0001 2A7E 0024 0111, 10
02000000: NotUsed, 0000 0001 0000 0000, 0
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[1.62 MB]...
erasing region [011E0000 to 011EFFFF]
erasing region [011F0000 to 0137FFFF]
in 11.56s
Flash[1.39 MB]...in 5.64s
* * Processed file in 25.64 seconds
* * * Phone flashing done in 1:33 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 5.50/16-06-06/RH-93 (c) NMP
IMEI: 010997000489380
Factory Default Settings...OK
PMM Send File
Operation Completed
Phone is in: Test mode
Full Factory Set...OK
Phone is in: Test mode
User Data...OK
Phone is in: Test mode
Leave Factory...OK
Phone is in: Test mode
Service Center...OK
Phone is in: Test mode
Software Upgrade...OK
Phone is in: Test mode
Production Tune...OK
Phone is in: Test mode
Imei: 010997000489380
SIM Unlock FAILED

sunny_cool · 11-17-2006, 08:37

Or ver 5.5o is the problem??

obioha · 11-17-2006, 08:51

for the2310,after erase,do you flash with 1600 flashfile,or 2310 file

sunny_cool · 11-17-2006, 20:10

Fake solution ....tried on 2 mobiles both in CS

SoftMobile · 11-17-2006, 22:16

Quote:

Originally Posted by obioha

for the2310,after erase,do you flash with 1600 flashfile,or 2310 file

Flash 2310 file not 1600

SoftMobile · 11-17-2006, 22:17

Quote:

Originally Posted by sunny_cool

Fake solution ....tried on 2 mobiles both in CS

Try full erase phone

catik · 11-17-2006, 22:37

Quote:

Originally Posted by sunny_cool

Fake solution ....tried on 2 mobiles both in CS

man u say problem imei start 0

your fones ist american marcet fones

Seriennummer:
010997000489380
Garantie:
NO
Care Services:

Warranty Class:
WARRANTY RESTRICTION
Gerät:
1112
Product code:
0535718
Garantie Start:

Garantie Ende:

Ship-to Country:
JM-JAMAICA

normal with 0 start

best regards
catik

Koller · 11-21-2006, 23:45

Working solution 100%. tried 2310 and 2610

jkgohil · 11-23-2006, 16:45

Quote:

Originally Posted by VELIKI

Phone is in: Test mode
Model: RH-93 ( N1112)
V 5.53/20-07-06/RH-93 (c) NMP
Production serial number VF2960232
Product code 0532991
Module code 0203167
Basic production code 0532665
Flash code
Order number
Long production SN
MCU SW V 5.53/20-07-06/RH-93/(c) NMP
HW 0502
PCI
UEM 1314
UPP 8705
RFIC 0500
DSP P05w06.v34
LCD INLUX:SYRS00
PPM V 5.53/20-07-06/RH-93/(c) NMP/ED
ADSP SW p%V 5.53\n20-07-06\nRH-93\n(c) NMP\ned
IMEI: 352298014810810
Phone is in: Test mode
Imei: 352298014810810
Info OK
Connect...
Resp:
o/0110/hello there
Login...
OK, available count
2;
busy, waiting...
V 5.53/20-07-06/RH-93 (c) NMP
IMEI: 352298014810810
Operator: 0010100000000000
Profile bits: 0000000000010002
Sim Status: Not locked
FINISHED OK
THANKS FOR HELP!!!!!!!!!!!!!!!!

HI

YOU HAVE USED LOGS TO UNLOCK THE PHONE I WANT TO KNOW IS THE ABOVE SOLUTION WORKING WITHOUT THE LOGS ...........

REGARDS
JK GOHIL

miever66 · 11-23-2006, 17:42

i have one 2610 after flashing insert sim?? does anyone know if this is flash problem???

miever66 · 11-23-2006, 17:43

one more 2610 that wouldnt unlock

Phone is in: Local mode
Imei: 35277001054****
FAILED FIND
FAILED, check cable

11-17-2006, 08:32	#5 (permalink)
sunny_cool No Life Poster Join Date: Apr 2005 Age: 42 Posts: 539 Member: 138217 Status: Offline Thanks Meter: 16	failed?? Is IMIE starting with 0 is the problem...Please help Thanks in advance Processing File: rh93_05.500 Boot... ASIC ID: 2201 DCT4 u_2nd.fia u_amd.fia 849EBF8065781C4FBA087C02CB4B Configuration Info (9F): Number of Flashes: 2 01000000: Amd, 0001 2A7E 0024 0111, 10 02000000: NotUsed, 0000 0001 0000 0000, 0 ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 Erase[4.31 MB]... erasing region [01000000 to 0100FFFF] erasing region [01010000 to 013BFFFF] erasing region [013C0000 to 013EFFFF] erasing region [017C0000 to 017EFFFF] erasing region [01FC0000 to 01FEFFFF] in 28.53s Flash[1.89 MB]...in 7.67s * * Processed file in 44.59 seconds Processing File: rh930_nai5.50aa Low level format...OK Boot... ASIC ID: 2201 DCT4 u_2nd.fia u_amd.fia 84FAFF4CA7E284633FFBA220CEFC Configuration Info (9F): Number of Flashes: 2 01000000: Amd, 0001 2A7E 0024 0111, 10 02000000: NotUsed, 0000 0001 0000 0000, 0 ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 Erase[0.25 MB]... erasing region [01380000 to 013BFFFF] in 1.84s Flash[0.16 MB]...in 0.66s * * Processed file in 15.69 seconds Extract content...OK Processing File: rh93_05.50aa Boot... ASIC ID: 2201 DCT4 u_2nd.fia u_amd.fia 849EBF8065781C4FBA087C02CB4B Configuration Info (9F): Number of Flashes: 2 01000000: Amd, 0001 2A7E 0024 0111, 10 02000000: NotUsed, 0000 0001 0000 0000, 0 ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 Erase[1.62 MB]... erasing region [011E0000 to 011EFFFF] erasing region [011F0000 to 0137FFFF] in 11.56s Flash[1.39 MB]...in 5.64s * * Processed file in 25.64 seconds * * * Phone flashing done in 1:33 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... V 5.50/16-06-06/RH-93 (c) NMP IMEI: 010997000489380 Factory Default Settings...OK PMM Send File Operation Completed Phone is in: Test mode Full Factory Set...OK Phone is in: Test mode User Data...OK Phone is in: Test mode Leave Factory...OK Phone is in: Test mode Service Center...OK Phone is in: Test mode Software Upgrade...OK Phone is in: Test mode Production Tune...OK Phone is in: Test mode Imei: 010997000489380 SIM Unlock FAILED

11-17-2006, 08:37	#6 (permalink)
sunny_cool No Life Poster Join Date: Apr 2005 Age: 42 Posts: 539 Member: 138217 Status: Offline Thanks Meter: 16	Failed??? Or ver 5.5o is the problem??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Pm For 2310 And 2610 Urgent	::. zine .::	Nokia Hardware & Hardware Repair	9	10-07-2007 12:41
2310 and 2610 no signal after unlock	Shayesta	Federal One	4	06-10-2007 18:49
1110,1112,2310,6030.2610,1600 urdu language pack needed	wasim_mobile200	Nokia Digital Core Technology 4 ( DCT-4 )	5	01-10-2007 20:58
im loss 24 credit for unlock nokia 2310 and 2610	Skaza	Universalbox	8	12-24-2006 17:35

11-15-2006, 17:50	#2 (permalink)
VELIKI No Life Poster Join Date: Nov 2002 Location: slovenia Age: 48 Posts: 589 Member: 18028 Status: Offline Thanks Meter: 20	if i am not wrong than must i flah 1112 with 5.03 than pm 1112-5.03ok and than 1112-900mhz or can i doit in 5.53 or???how

11-15-2006, 18:03	#3 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	The versions in PM files does not mater. You can use these PM files with any software version.

11-15-2006, 18:10	#4 (permalink)
VELIKI No Life Poster Join Date: Nov 2002 Location: slovenia Age: 48 Posts: 589 Member: 18028 Status: Offline Thanks Meter: 20	Phone is in: Test mode Model: RH-93 ( N1112) V 5.53/20-07-06/RH-93 (c) NMP Production serial number VF2960232 Product code 0532991 Module code 0203167 Basic production code 0532665 Flash code Order number Long production SN MCU SW V 5.53/20-07-06/RH-93/(c) NMP HW 0502 PCI UEM 1314 UPP 8705 RFIC 0500 DSP P05w06.v34 LCD INLUX:SYRS00 PPM V 5.53/20-07-06/RH-93/(c) NMP/ED ADSP SW p%V 5.53\n20-07-06\nRH-93\n(c) NMP\ned IMEI: 352298014810810 Phone is in: Test mode Imei: 352298014810810 Info OK Connect... Resp: o/0110/hello there Login... OK, available count 2; busy, waiting... V 5.53/20-07-06/RH-93 (c) NMP IMEI: 352298014810810 Operator: 0010100000000000 Profile bits: 0000000000010002 Sim Status: Not locked FINISHED OK THANKS FOR HELP!!!!!!!!!!!!!!!!

11-17-2006, 08:51	#7 (permalink)
obioha No Life Poster Join Date: Feb 2005 Location: nija Africa Age: 47 Posts: 1,332 Member: 121356 Status: Offline Thanks Meter: 73	for the2310,after erase,do you flash with 1600 flashfile,or 2310 file

11-17-2006, 20:10	#8 (permalink)
sunny_cool No Life Poster Join Date: Apr 2005 Age: 42 Posts: 539 Member: 138217 Status: Offline Thanks Meter: 16	Fake solution ....tried on 2 mobiles both in CS

11-21-2006, 23:45	#12 (permalink)
Koller Freak Poster Join Date: Jul 2005 Age: 42 Posts: 121 Member: 165586 Status: Offline Thanks Meter: 17	Working solution 100%. tried 2310 and 2610

11-23-2006, 17:42	#14 (permalink)
miever66 Freak Poster Join Date: Mar 2005 Age: 43 Posts: 253 Member: 130055 Status: Offline Thanks Meter: 1	i have one 2610 after flashing insert sim?? does anyone know if this is flash problem???

11-23-2006, 17:43	#15 (permalink)
miever66 Freak Poster Join Date: Mar 2005 Age: 43 Posts: 253 Member: 130055 Status: Offline Thanks Meter: 1	one more 2610 that wouldnt unlock Phone is in: Local mode Imei: 35277001054**** FAILED FIND FAILED, check cable