FPS-21 flashing problem - GSM-Forum

kosmonaft · 07-25-2009, 21:06

I'm have use FPS-21, but no one unit can't programme! Dose need to be FPS-21 activated for flashing?

Flashbus Rx buffer dump: 00000000000000000000000000000000000000000000000000 0000000000
Error! Phone program failed!
Error code D101
Flashing time: 0 min and 4 sec
All operations completed
Product flashing failed.

Trying via USB

Dr.kwak · 07-26-2009, 04:47

yes it is activated, bro, what unit are you trying to update? because this error D101 is connection error between your box or your usb, try to use original usb. then what is the status of your phone right now? if its dead try to use no connection rather usb connection then press the power button after you start flashing

kosmonaft · 07-26-2009, 14:38

I'm use 100% original cables. Trying with good working phone N5320 (just whant to flash). Use NFPD USB/TCP connections - all the same! See attach.

german gsm team · 07-26-2009, 16:09

Just for your information:

You don't need SX-4 for flashing any BB5 phone. It's only needed for FAID calculation when you flash DCT-4 phones.

Dr.kwak · 07-27-2009, 08:24

I'm use 100% original cables. Trying with good working phone N5320 (just whant to flash). Use NFPD USB/TCP connections - all the same! See attach.
Attached Thumbnails

--------------------------------------------------------------------------------
Last edited by kosmonaft; Yesterday at 2.

Brother you cannot flash this unit without cu-4 or ss46 you badly needed this and internet connection connected to the back of your FPS 21, then go to file manage connection new choose TCP/IP connection then flash it

kosmonaft · 07-27-2009, 08:32

so, flashing (using FPS-21) are possible only via SS-62 + CU-4 (USB as FBUS) ?! What about CA-101 pluged into back USB FPS-21?

MAK_US1977 · 07-27-2009, 08:54

use USB only (not NFPD USB) with usb cable

idogsm · 03-14-2010, 18:27

Hi
need the box FPS 20-21
if you can get one i need
[email protected]

07-25-2009, 21:06	#1 (permalink)
kosmonaft No Life Poster Join Date: Oct 2002 Location: Russia,Anapa Age: 48 Posts: 614 Member: 16938 Status: Offline Thanks Meter: 28	FPS-21 flashing problem I'm have use FPS-21, but no one unit can't programme! Dose need to be FPS-21 activated for flashing? Flashbus Rx buffer dump: 00000000000000000000000000000000000000000000000000 0000000000 Error! Phone program failed! Error code D101 Flashing time: 0 min and 4 sec All operations completed Product flashing failed. Trying via USB

03-14-2010, 18:27	#8 (permalink)
idogsm Freak Poster Join Date: Dec 2001 Location: israel Age: 69 Posts: 325 Member: 7994 Status: Offline Thanks Meter: 20	need fps Hi need the box FPS 20-21 if you can get one i need [email protected]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FPS-20 - fps-21 pinout	pol98	Nokia Base Band 5 ( BB-5 )	1	03-14-2010 18:26
Nokia FPS-10 vs. FPS-21	carloz	Hardware Equipments for GSM	0	01-15-2010 16:39
Original Nokia Flash Prommer, FPS-21 \ FPS-10 \ FLS-5 For Best Price !!!	GSMFLASCH	Main Sales Section	0	09-15-2008 11:49
FPS-21 Flash Prommer Full set 40parts..	GSMFLASCH	Main Sales Section	0	05-19-2008 11:57

07-26-2009, 04:47	#2 (permalink)
Dr.kwak Freak Poster Join Date: Nov 2008 Location: in front of you Posts: 147 Member: 894862 Status: Offline Thanks Meter: 21	yes it is activated, bro, what unit are you trying to update? because this error D101 is connection error between your box or your usb, try to use original usb. then what is the status of your phone right now? if its dead try to use no connection rather usb connection then press the power button after you start flashing

07-26-2009, 16:09	#4 (permalink)
german gsm team No Life Poster Join Date: Mar 2002 Location: Somewhere in the World Age: 54 Posts: 1,425 Member: 9848 Status: Offline Thanks Meter: 144	Just for your information: You don't need SX-4 for flashing any BB5 phone. It's only needed for FAID calculation when you flash DCT-4 phones.

07-27-2009, 08:24	#5 (permalink)
Dr.kwak Freak Poster Join Date: Nov 2008 Location: in front of you Posts: 147 Member: 894862 Status: Offline Thanks Meter: 21	I'm use 100% original cables. Trying with good working phone N5320 (just whant to flash). Use NFPD USB/TCP connections - all the same! See attach. Attached Thumbnails -------------------------------------------------------------------------------- Last edited by kosmonaft; Yesterday at 2. Brother you cannot flash this unit without cu-4 or ss46 you badly needed this and internet connection connected to the back of your FPS 21, then go to file manage connection new choose TCP/IP connection then flash it

07-27-2009, 08:32	#6 (permalink)
kosmonaft No Life Poster Join Date: Oct 2002 Location: Russia,Anapa Age: 48 Posts: 614 Member: 16938 Status: Offline Thanks Meter: 28	so, flashing (using FPS-21) are possible only via SS-62 + CU-4 (USB as FBUS) ?! What about CA-101 pluged into back USB FPS-21?

07-27-2009, 08:54	#7 (permalink)
MAK_US1977 No Life Poster Join Date: Apr 2001 Location: Egypt Age: 46 Posts: 1,530 Member: 4263 Status: Offline Sonork: 100.1582330 Thanks Meter: 49	use USB only (not NFPD USB) with usb cable