>>>Iphone 2G 3.1.2 unlock for windows <<< - Page 5 - GSM-Forum

denisagal · 11-06-2009, 01:58

ita work thnks man

dcg28052 · 11-06-2009, 09:14

Quote:

Originally Posted by powerstroke

Hey GSM-
I tried going through your original directions and got error 1604. So then I tried dcg's method...
dcg- When I went through your directions I got to restore and then iTunes came up and said my phone could not be restored and said error 1611.

Here is what I did (obviously wrong): I have a 2g unlocked running on tmobile. I shift+restored up to 3.1.2 in itunes without realizing that it would upgrade my baseband and prevent me from unlocking. So I still tried to jailbreak it through redsn0w, it would keep freezing. So I was stuck in recovery mode loop, put it into DFU mode, tried running blackra1n to at least jailbreak, but blackra1n kept crashing on my computer. So I am stuck in recovery mode loop getting error 1611. I attempted to use iRecovery, but it kept giving me the "Got USB No iPhone found" message and I've been searching to see how to get rid of that, but can't seem to get anything to work.

Hey Bro, if you shift+restore first, you will get error, read the instruction 1-5, you restore with original file first by holding home button while phone is off and connect to itune, then jailbreak with Blackra1n, then restore by shift+restore using custom ipsw file, you will not get error,
let me put it this way, if itune shows your iphone's serial number when you try to restore you are in recover mode and you will get error, if itune shows only iphone and nothing else you are in DFU mode and you will not get error and you can always restore with custom 1.3.0 7A431 ipsw file and jailbreak+unlock when in DFU mode.

Regards

.:Gsm-Nikki:. · 11-07-2009, 00:04

GSMMAN187 is one of the experts in iphone,,
he helped me with 2 of my iphones
hes the great for me

w.b.r
gsm-nikki
(hotmail.com)

GSMman187 · 11-10-2009, 08:53

Quote:

Originally Posted by powerstroke

Battery was fully charged...do I need to let it die then re-charge it?

no................................................ ......

ragguem76 · 11-10-2009, 12:25

restore 3.1 + 3.12 + blackra1n for jailbreak + custom 3.12 in recovry mode it's mork for me

GSMman187 · 11-12-2009, 02:39

FOR THOSE HAVING ERROR 1600, 1604 etc..

OTHER WAY TO DO IT.

1. UPDATE, RESTORE TO ORIGINAL 3.1.2
2. RUN BLACKRA1N (WWW.BLACKRA1N.COM).
-DONT DO ANYTHING ON PHONE
3. PUT IN RECOVERY MODE (NOT DFU)
4. RESTORE TO THE CUSTOM FIRMWARE THAT I POSTED IN THE FIRST POST OF THIS THREAD.

ENJOY UNLOCKED, ACTIVATED, JAILBROKEN IPHONE 2G.

kaholukkk · 11-17-2009, 18:02

Quote:

Originally Posted by GSMman187

FOR THOSE HAVING ERROR 1600, 1604 etc..

OTHER WAY TO DO IT.

1. UPDATE, RESTORE TO ORIGINAL 3.1.2
2. RUN BLACKRA1N (WWW.BLACKRA1N.COM).
-DONT DO ANYTHING ON PHONE
3. PUT IN RECOVERY MODE (NOT DFU)
4. RESTORE TO THE CUSTOM FIRMWARE THAT I POSTED IN THE FIRST POST OF THIS THREAD.

ENJOY UNLOCKED, ACTIVATED, JAILBROKEN IPHONE 2G.

i spend ,more than 10 times. at the end, your method is working and iphone is unlocked. thanks

GSMman187 · 11-17-2009, 22:51

Quote:

Originally Posted by kaholukkk

i spend ,more than 10 times. at the end, your method is working and iphone is unlocked. thanks

yes 100% working

...........................

jusluke · 11-18-2009, 20:50

just used this solution and its 100% working now i have a problem restoring contacts as itunes sees it as a new iphone and if i click restore it also restore firmware. i tried the option on left hand menu it says backing up contacts, and other info but not firmware but the results is the same

any way around this???

GSMman187 · 11-19-2009, 00:19

Quote:

Originally Posted by jusluke

just used this solution and its 100% working now i have a problem restoring contacts as itunes sees it as a new iphone and if i click restore it also restore firmware. i tried the option on left hand menu it says backing up contacts, and other info but not firmware but the results is the same

any way around this???

must have saved contacts in first place

srkhan · 11-19-2009, 12:55

Quote:

Originally Posted by GSMman187

FOR THOSE HAVING ERROR 1600, 1604 etc..

OTHER WAY TO DO IT.

1. UPDATE, RESTORE TO ORIGINAL 3.1.2
2. RUN BLACKRA1N (WWW.BLACKRA1N.COM).
-DONT DO ANYTHING ON PHONE
3. PUT IN RECOVERY MODE (NOT DFU)
4. RESTORE TO THE CUSTOM FIRMWARE THAT I POSTED IN THE FIRST POST OF THIS THREAD.

ENJOY UNLOCKED, ACTIVATED, JAILBROKEN IPHONE 2G.

This is the perfect solution but make sure B4 Custom firmware that Bettery is full charged!!!

GSMman187 · 11-19-2009, 15:10

Quote:

Originally Posted by srkhan

This is the perfect solution but make sure B4 Custom firmware that Bettery is full charged!!!

yes at least charged enough to flash the phone

GSMman187 · 11-23-2009, 12:35

Quote:

Originally Posted by ragguem76

restore 3.1 + 3.12 + blackra1n for jailbreak + custom 3.12 in recovry mode it's mork for me

no need restore the phone twice. ....

Schwagg · 12-02-2009, 22:55

Quote:

Originally Posted by GSMman187

If you’re already jailbroken (by whatever means), you don’t need to mess around with DFU mode at all. Just get custom IPSW and Option-Restore (Shift-Restore on Windows) to it via iTunes. Don’t enter DFU mode at all.
That’s because all jailbroken devices accept a custom .ipsw created by PwnageTool

I just want to make sure I'm doing this right before I brick my iPhone.
iPhone 2G (8GB)
firmware 3.0 (7A341)
modem firmware 04.05.04_G
already jailbroken/unlocked (with redsn0w) on T-Mobile

Since it's already jailbroken, I don't need to put it in DFU, correct? Do these sound like the steps I should follow?
1. Upgrade iTunes to 9.0.2.
2. Shift+click "Restore" button in iTunes and browse to the location I saved the .ipsw file I downloaded in post #1 (it should flash and reboot by itself).
3. After the reboot, I will be jailbroken and unlocked? No DFU or blackra1n or bootneuter needed?

Will I need to re download Cydia or any of the apps or packages I installed via Cydia? What about the other apps I installed via Installous? Will all of my settings (including network and saved wifi passwords), pictures, contacts, saved games, etc, be intact?
Also, does this do anything to my baseband? I'm worried that Apple will find a way to block newer basebands from jailbreaking, so I'd like to preserve as low BB as possible...

GSMman187 · 12-02-2009, 23:18

Quote:

Originally Posted by Schwagg

I just want to make sure I'm doing this right before I brick my iPhone.
iPhone 2G (8GB)
firmware 3.0 (7A341)
modem firmware 04.05.04_G
already jailbroken/unlocked (with redsn0w) on T-Mobile

Since it's already jailbroken, I don't need to put it in DFU, correct? Do these sound like the steps I should follow?
1. Upgrade iTunes to 9.0.2.
2. Shift+click "Restore" button in iTunes and browse to the location I saved the .ipsw file I downloaded in post #1 (it should flash and reboot by itself).
3. After the reboot, I will be jailbroken and unlocked? No DFU or blackra1n or bootneuter needed?

Will I need to re download Cydia or any of the apps or packages I installed via Cydia? What about the other apps I installed via Installous? Will all of my settings (including network and saved wifi passwords), pictures, contacts, saved games, etc, be intact?
Also, does this do anything to my baseband? I'm worried that Apple will find a way to block newer basebands from jailbreaking, so I'd like to preserve as low BB as possible...

dont upgrade itunes . Upgrade the phone fimrware in the phone. to 3.1.2
then run blackrain
then put phone in restore mode
then use the CUSTOM FIRMWARE that i posted.

all done all unlocked, activated and jailbroken

and you dont need to worry abour your baseband.. baseband problems dont apply to 2G iphones .

br

11-18-2009, 20:50	#69 (permalink)
jusluke Freak Poster Join Date: Apr 2003 Location: Vancouver, Canada Age: 56 Posts: 497 Member: 26867 Status: Offline Thanks Meter: 3	Working now problem with contacts just used this solution and its 100% working now i have a problem restoring contacts as itunes sees it as a new iphone and if i click restore it also restore firmware. i tried the option on left hand menu it says backing up contacts, and other info but not firmware but the results is the same any way around this???

11-06-2009, 01:58	#61 (permalink)
denisagal Junior Member Join Date: Jan 2008 Location: Holland Posts: 27 Member: 694032 Status: Offline Thanks Meter: 6	ita work thnks man

11-07-2009, 00:04	#63 (permalink)
.:Gsm-Nikki:. No Life Poster Join Date: May 2008 Posts: 1,154 Member: 783315 Status: Offline Sonork: 100.1588917 Thanks Meter: 228	GSMMAN187 is one of the experts in iphone,, he helped me with 2 of my iphones hes the great for me w.b.r gsm-nikki (hotmail.com)

11-10-2009, 12:25	#65 (permalink)
ragguem76 Freak Poster Join Date: Dec 2004 Location: gsmhosting Age: 47 Posts: 109 Member: 96934 Status: Offline Thanks Meter: 32	restore 3.1 + 3.12 + blackra1n for jailbreak + custom 3.12 in recovry mode it's mork for me

11-12-2009, 02:39	#66 (permalink)
GSMman187 No Life Poster Join Date: Dec 2008 Location: SWEDEN-China-Thailand-Singapor Posts: 6,028 Member: 917893 Status: Offline Sonork: 100.1584763 Thanks Meter: 3,156	FOR THOSE HAVING ERROR 1600, 1604 etc.. OTHER WAY TO DO IT. 1. UPDATE, RESTORE TO ORIGINAL 3.1.2 2. RUN BLACKRA1N (WWW.BLACKRA1N.COM). -DONT DO ANYTHING ON PHONE 3. PUT IN RECOVERY MODE (NOT DFU) 4. RESTORE TO THE CUSTOM FIRMWARE THAT I POSTED IN THE FIRST POST OF THIS THREAD. ENJOY UNLOCKED, ACTIVATED, JAILBROKEN IPHONE 2G.