EPOC phones still can be unlocked & other news - Page 2 - GSM-Forum

abbasi73 · 03-08-2007, 13:30

Quote:

Originally Posted by universalbox

We have reactivated DB2020 service because EPOC phones (P990, W950) still can be unlocked. However, we couldn't make DB2020 unlock service to work and we can't give ETA of this service availability.
"Dead" phones can be repaired by FBUS cable by clicking "Restore" button on the Ericsson->UMTS->Maintenance tab.

phone still dead

TUMTSWriteGDFSThread started at: 2007/03/08 11:11:06
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.30V is in range of: 4.00V ±10.0%
Output power at Line2 5.74V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 460kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 351708-01-184510-X / 49 / 1
First FlashID: 897E
Phone Color: RED.
Phone CID: 49.
Leaving test mode...
Output power at Line1 4.30V is in range of: 4.00V ±10.0%
Output power at Line2 5.74V is in range of: 5.00V ±25.0%
Serial line 1 speed changed to 460kBaud.
Entering explorer mode...
OTP IMEI/CID/PAF: 351708-01-184510-X / 49 / 1
Initializing GDFS...
Connecting to server: APAC
Bypassing security...
Credits: 104
Credits left: 101
Leaving test mode...
--------------------------------------------------------------------------------
TUMTSWriteGDFSThread finished at: 2007/03/08 11:13:09
Done.
TUMTSRestorePhoneThread started at: 2007/03/08 11:49:00
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.28V is in range of: 4.00V ±10.0%
Output power at Line2 5.74V is in range of: 5.00V ±25.0%
Serial line 1 speed changed to 460kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 351708-01-184510-X / 49 / 1
First FlashID: 897E
Phone Color: RED.
Phone CID: 49.
Leaving test mode...
Output power at Line1 4.28V is in range of: 4.00V ±10.0%
Output power at Line2 5.74V is in range of: 5.00V ±25.0%
Serial line 1 speed changed to 460kBaud.
Entering explorer mode...
OTP IMEI/CID/PAF: 351708-01-184510-X / 49 / 1
Initializing GDFS...
Connecting to server: APAC
Bypassing security...
Credits: 101
Credits left: 98
Leaving test mode...
--------------------------------------------------------------------------------
TUMTSRestorePhoneThread finished at: 2007/03/08 11:50:38
Done.

faisal ikram · 03-08-2007, 13:41

hi every one
i m in same problem here customer getting angry here plz hlep..

abbasi73 · 03-08-2007, 14:15

Quote:

Originally Posted by Raja Com.

i have k610i dead by unlocking and when i have restore by fbus cable it gives me error.

Plz help me ub team ...

logs detail...

TUMTSRestorePhoneThread started at: 2007/03/08 15:39:32
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.24V is in range of: 4.00V ±10.0%
Output power at Line2 4.72V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 460kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 353813-01-310102-X / 49 / 1
First FlashID: 2019
Phone Color: RED.
Phone CID: 49.
--------------------------------------------------------------------------------
TUMTSRestorePhoneThread finished at: 2007/03/08 15:39:42

Terminated with error: GDFS file: "C:\PROGRA~1\Uni\Files\Ericsson\GDFS\UMTS\35381301 310102.gdfs" not found [00021122]
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBPN6V9W]

Br.
Raja Yasir

C:\Uni\Files\Ericsson\GDFS\UMTS 35381301310102_sing.gdfs

and Rename 35381301310102.gdfs

Raja Com. · 03-08-2007, 14:31

Quote:

Originally Posted by abbasi73

C:\Uni\Files\Ericsson\GDFS\UMTS 35381301310102_sing.gdfs

and Rename 35381301310102.gdfs

Brother i already did that method 2 days ago and lost 3 credit.
phone still dead.

227-153 = 74.

i have lost 74 credits to revive this phone.

Br.
Raja Yasir

unlocker123 · 03-08-2007, 14:42

k800 only red led blinking after tryed to unlock in ub.ub says restore phon in ub,i did restore was done.ub tooks 3 more cradit but my phon is in same condition.any solution.plz help me.i m fedup wit ub box.i sugest to all dont buy ub anymore.it wont unlock ur phon it will kills ur phone.what can we do now.

.::Zafar Communication::. · 03-08-2007, 14:44

after renaming gdfs file try two time 6 more credit loss no success

waiting for reply ub team

thanks & regards

Zafar Janjua

--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.43V is in range of: 4.00V ±10.0%
Output power at Line2 4.63V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 460kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1
First FlashID: 2019
Phone Color: RED.
Phone CID: 49.
Leaving test mode...
Output power at Line1 4.40V is in range of: 4.00V ±10.0%
Output power at Line2 4.63V is in range of: 5.00V ±25.0%
Serial line 1 speed changed to 460kBaud.
Entering explorer mode...
OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1
Initializing GDFS...
Connecting to server: EU
Bypassing security...
Credits: 417
Credits left: 414
Leaving test mode...
--------------------------------------------------------------------------------
TUMTSRestorePhoneThread finished at: 2007/03/08 18:30:26

Done.

TUMTSRestorePhoneThread started at: 2007/03/08 18:31:49
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Output power at Line1 4.40V is in range of: 4.00V ±10.0%
Output power at Line2 4.64V is in range of: 5.00V ±25.0%
Please turn on the phone!
Serial line 1 speed changed to 460kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1
First FlashID: 2019
Phone Color: RED.
Phone CID: 49.
Leaving test mode...
Output power at Line1 4.43V is in range of: 4.00V ±10.0%
Output power at Line2 4.63V is in range of: 5.00V ±25.0%
Serial line 1 speed changed to 460kBaud.
Entering explorer mode...
OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1
Initializing GDFS...
Connecting to server: EU
Bypassing security...
Credits: 414
Credits left: 411
Leaving test mode...
--------------------------------------------------------------------------------
TUMTSRestorePhoneThread finished at: 2007/03/08 18:33:13

tersace · 03-08-2007, 15:13

UB Team we need so fix this problem ASAP, can you please look at it and fix it because Resore does not work with Fbus cable

Kind Regards

ravi11 · 03-08-2007, 15:18

has anybody tried to unlock EPOC phones after that if yes please post the result here
thanx

abbasi73 · 03-08-2007, 15:31

Quote:

Originally Posted by ravi11

has anybody tried to unlock EPOC phones after that if yes please post the result here
thanx

TUMTSUnlockPhoneThread started at: 2007/03/07 15:28:09
--------------------------------------------------------------------------------
MCU Ericsson Version: 1.262, and up to date.
SMCU Ericsson Version: 1.62, and up to date.
Please turn on the phone while pressing the C key!
Entering UMTS mode...
Trying to send loader...
OTP IMEI/CID/PAF: 359593-00-226633-X / 49 / 1
First FlashID: 2010
Entering explorer mode...
Initializing GDFS...
Connecting to server: APAC
Bypassing security...
Credits: 160
Credits left: 157
Signing phone...
Leaving test mode...
Please turn on the phone, and connect it to the DCU-60 cable
Port found at: Sony Ericsson P990 USB Modem
Connecting to server: APAC
Credits: 157
Credits left: 107
DCRCs calculated successfully.
Waiting the phone to turn off...
--------------------------------------------------------------------------------
TUMTSUnlockPhoneThread finished at: 2007/03/07 15:32:38
Done.

abbasi

ch_rathore · 03-08-2007, 16:25

Again My 3 Credits Lose My 3 Credits Lose 5 Time And No Work
Db2020 No Work

sorinm · 03-08-2007, 16:37

did somebody succeded to repair a dead phone after the 'magic' update?
restore gdfs from gdfs BACKUP (if you made it before unlocking)?
universalbox WAS the best solution for unlock db2020 - we all unlocked so many phones - but it should not end like this
if there is no way for now to repair these dead phones (with or without backup) than we should now so that we can refund the customers and carry on

br
sorinm

MadPhone · 03-08-2007, 22:00

you right sorinm, but until now they just say that we can restore but this dont helps. i already try to fix with setool and still the same... they know that people are having problems and they dont give us answers.

mehta_sajid · 03-08-2007, 22:29

has any one unlocked w950 yet

keaelite · 03-09-2007, 01:57

you can repair your dead phone using SETOOL just pressing IDENTIFY tested by me,when unlocking and killed my phone by UB box

expertunlocker · 03-09-2007, 02:03

Helllo Ub team

we are waiting for Wednesday , Can you tell wen it will come or we stop waiting

03-09-2007, 02:03	#30 (permalink)
expertunlocker Insane Poster Join Date: Jan 2006 Age: 43 Posts: 64 Member: 220269 Status: Offline Thanks Meter: 2	Wednesday Helllo Ub team we are waiting for Wednesday , Can you tell wen it will come or we stop waiting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
List of phone that cannot be or can be unlocked with J.a.f	cpu2007	Nokia Base Band 5 ( BB-5 )	5	02-10-2009 22:09
EPOC phones still can be unlocked ??????????	Solutions13	Universalbox	1	03-23-2007 13:09
NEC N110 phone code can be unlocked ?	crossings	NEC	0	05-02-2006 12:46
M300 phone lock can be Unlock	aukonline	FuriouS II	2	02-11-2006 14:49
D500 Phone freezed can be unlock with Free winimei soft ?	Gsm Bunny	SWIFT Platform	0	04-20-2005 16:24

03-08-2007, 13:41	#17 (permalink)
faisal ikram Junior Member Join Date: Mar 2007 Posts: 6 Member: 461976 Status: Offline Thanks Meter: 0	hi every one i m in same problem here customer getting angry here plz hlep..

03-08-2007, 14:42	#20 (permalink)
unlocker123 Insane Poster Join Date: Feb 2006 Location: united kingdom Posts: 73 Member: 230184 Status: Offline Thanks Meter: 0	k800 only red led blinking after tryed to unlock in ub.ub says restore phon in ub,i did restore was done.ub tooks 3 more cradit but my phon is in same condition.any solution.plz help me.i m fedup wit ub box.i sugest to all dont buy ub anymore.it wont unlock ur phon it will kills ur phone.what can we do now.

03-08-2007, 14:44	#21 (permalink)
.::Zafar Communication::. No Life Poster Join Date: Jul 2004 Location: Live in your Heart Posts: 1,550 Member: 71045 Status: Offline Thanks Meter: 19	after renaming gdfs file try two time 6 more credit loss no success waiting for reply ub team thanks & regards Zafar Janjua -------------------------------------------------------------------------------- MCU Ericsson Version: 1.262, and up to date. SMCU Ericsson Version: 1.62, and up to date. Output power at Line1 4.43V is in range of: 4.00V ±10.0% Output power at Line2 4.63V is in range of: 5.00V ±25.0% Please turn on the phone! Serial line 1 speed changed to 460kBaud. Trying to send loader... OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1 First FlashID: 2019 Phone Color: RED. Phone CID: 49. Leaving test mode... Output power at Line1 4.40V is in range of: 4.00V ±10.0% Output power at Line2 4.63V is in range of: 5.00V ±25.0% Serial line 1 speed changed to 460kBaud. Entering explorer mode... OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1 Initializing GDFS... Connecting to server: EU Bypassing security... Credits: 417 Credits left: 414 Leaving test mode... -------------------------------------------------------------------------------- TUMTSRestorePhoneThread finished at: 2007/03/08 18:30:26 Done. TUMTSRestorePhoneThread started at: 2007/03/08 18:31:49 -------------------------------------------------------------------------------- MCU Ericsson Version: 1.262, and up to date. SMCU Ericsson Version: 1.62, and up to date. Output power at Line1 4.40V is in range of: 4.00V ±10.0% Output power at Line2 4.64V is in range of: 5.00V ±25.0% Please turn on the phone! Serial line 1 speed changed to 460kBaud. Trying to send loader... OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1 First FlashID: 2019 Phone Color: RED. Phone CID: 49. Leaving test mode... Output power at Line1 4.43V is in range of: 4.00V ±10.0% Output power at Line2 4.63V is in range of: 5.00V ±25.0% Serial line 1 speed changed to 460kBaud. Entering explorer mode... OTP IMEI/CID/PAF: 351707-01-396000-X / 49 / 1 Initializing GDFS... Connecting to server: EU Bypassing security... Credits: 414 Credits left: 411 Leaving test mode... -------------------------------------------------------------------------------- TUMTSRestorePhoneThread finished at: 2007/03/08 18:33:13

03-08-2007, 15:13	#22 (permalink)
tersace Freak Poster Join Date: Nov 2003 Age: 46 Posts: 379 Member: 44483 Status: Offline Thanks Meter: 4	UB Team we need so fix this problem ASAP, can you please look at it and fix it because Resore does not work with Fbus cable Kind Regards

03-08-2007, 15:18	#23 (permalink)
ravi11 Freak Poster Join Date: Sep 2005 Location: London, UK Posts: 185 Member: 177551 Status: Offline Thanks Meter: 11	has anybody tried to unlock EPOC phones after that if yes please post the result here thanx

03-08-2007, 16:25	#25 (permalink)
ch_rathore No Life Poster Join Date: Aug 2005 Age: 41 Posts: 619 Member: 170313 Status: Offline Thanks Meter: 46	Again My 3 Credits Lose My 3 Credits Lose 5 Time And No Work Db2020 No Work

03-08-2007, 16:37	#26 (permalink)
sorinm No Life Poster Join Date: Apr 2002 Posts: 1,430 Member: 10964 Status: Offline Thanks Meter: 285	did somebody succeded to repair a dead phone after the 'magic' update? restore gdfs from gdfs BACKUP (if you made it before unlocking)? universalbox WAS the best solution for unlock db2020 - we all unlocked so many phones - but it should not end like this if there is no way for now to repair these dead phones (with or without backup) than we should now so that we can refund the customers and carry on br sorinm

03-08-2007, 22:00	#27 (permalink)
MadPhone No Life Poster Join Date: Nov 2001 Location: Underground Age: 43 Posts: 761 Member: 7468 Status: Offline Thanks Meter: 2	you right sorinm, but until now they just say that we can restore but this dont helps. i already try to fix with setool and still the same... they know that people are having problems and they dont give us answers.

03-08-2007, 22:29	#28 (permalink)
mehta_sajid Freak Poster Join Date: Jul 2005 Location: coventry uk Age: 44 Posts: 266 Member: 160240 Status: Offline Thanks Meter: 12	has any one unlocked w950 yet

03-09-2007, 01:57	#29 (permalink)
keaelite No Life Poster Join Date: Jun 2006 Location: sn,fdo,lu philippines Posts: 3,346 Member: 288470 Status: Offline Sonork: 100.1605122 Thanks Meter: 664	you can repair your dead phone using SETOOL just pressing IDENTIFY tested by me,when unlocking and killed my phone by UB box