unlock MC60 v10 - GSM-Forum

beli_the_king · 04-08-2004, 10:57

i have siemens MC60 v10
i have cut TestPoint
and tried to unlock with Freia f9_162c

but it does not work

FREIA - Engine build 9, Frontend build 3
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Victor, Pinker, Tom,
and all the others who supports ...
COMM_LoadBoots : selected phone family is 10
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 01.00
SEC_BCDIMEIToNormalIMEI : invalid decoded IMEI
COMM_LoadBoots : EEPROM IMEI (17) is corrupt
COMM_LoadBoots : original IMEI is 351995******** (locked)
COMM_LoadBoots : found SIEMENS MC60 lgX vff (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - FFFF
COMM_LoadBoots : phone ids are 695E381B [00000000]
COMM_UpdateIMEIBlocks : update is not accepted

need help

THX

ROBISH_GSM · 04-09-2004, 01:18

me too

i have th same problem with mc 60 v10

i u found any solution plz contac to me

and i'll contact u if i found any solution

and the same for sl 55 v16

Chris02 · 04-09-2004, 15:58

For Sl55 v16 look in x5x section and use search! There is a solution!

EPAC · 04-09-2004, 17:17

Same problem on my MC60 v10. I built my own RS232 Serial interface and have it working on Siemens Data Suite but Freia & SEBAgsm unlocker for MC60 won't work.
(All these programs setup the supply voltage to the interface chip.
After messing about with various voltage supply methods I decided my hardware's OK and it's down to v10.) Logged onto forum and found you guys had same issue.
Does the MC60 have a test point fix too?

beli_the_king · 04-10-2004, 12:11

the MC60 needs TestPoint, if u need picture mail me [email protected]

EPAC · 04-11-2004, 10:45

Quote:

Originally Posted by beli_the_king

the MC60 needs TestPoint, if u need picture mail me [email protected]

Mail should be with U. Many Thnx. EPAC

Siemens man · 04-14-2004, 02:21

hi guys
wich solution is working in crusider griffin and free freia9(162c)? wich test point is right?
thank you for info

Chris02 · 04-14-2004, 13:12

Quote:

Originally Posted by Siemens man

hi guys
wich solution is working in crusider griffin and free freia9(162c)? wich test point is right?
thank you for info

There is only one TSP for MC60. Look in testpoint.exe. There u can find the right one.

No free solution yet. And I don't know if griffin can do it!

**sebagsm** · 04-14-2004, 13:15

Yes griffin can do it .... with testpoint ....

Siemens man · 04-14-2004, 18:45

HI MAN
PLEASE HELP ME TO UNLOCK MY PHONE. I HOPE
THANK YOU

Quote:

Originally Posted by Chris02

There is only one TSP for MC60. Look in testpoint.exe. There u can find the right one.

No free solution yet. And I don't know if griffin can do it!

beli_the_king · 04-14-2004, 14:48

i have SIEMENS CLIP,CRD & MARTECH it works only with TP, but it would be good to find out if it's posible to unlock it with some free soft, for the people who has no clip or martek or what else

THX

Chris02 · 04-14-2004, 19:26

I have sent u testpoint.exe

kolawole yusuf · 06-13-2004, 14:52

[pls help i need test point .exe
yokuboye@yahoo .com

KoTsK · 04-16-2004, 18:03

is there still no solution for free? for locked and/or died mc60?

danilo_nop · 04-16-2004, 22:57

I repair dead mc60 whit freia 10, unlock works too

04-08-2004, 10:57	#1 (permalink)
beli_the_king Freak Poster Join Date: Dec 2003 Location: Bosnia and Hercegovina @ Saraj Age: 40 Posts: 340 Member: 45907 Status: Offline Thanks Meter: 8	unlock MC60 v10 i have siemens MC60 v10 i have cut TestPoint and tried to unlock with Freia f9_162c but it does not work FREIA - Engine build 9, Frontend build 3 Thanks goes out for the following: Maxim, Rolis, Sergey, PapaJoe, Lead, TheWizard, Jozso (for hardware and cable support and of course beta testing), Nico, Victor, Pinker, Tom, and all the others who supports ... COMM_LoadBoots : selected phone family is 10 COMM_IsBootRunning : bootcode does not seem to be running COMM_LoadBoots : Waiting to power on the phone ... COMM_LoadBoots : phone is powered on COMM_LoadBoots : internal loader version is 01.00 SEC_BCDIMEIToNormalIMEI : invalid decoded IMEI COMM_LoadBoots : EEPROM IMEI (17) is corrupt COMM_LoadBoots : original IMEI is 351995******** (locked) COMM_LoadBoots : found SIEMENS MC60 lgX vff (1) COMM_LoadBoots : flash ids are 00012212 [00000000] - FFFF COMM_LoadBoots : phone ids are 695E381B [00000000] COMM_UpdateIMEIBlocks : update is not accepted need help THX

06-13-2004, 14:52	#13 (permalink)
kolawole yusuf Junior Member Join Date: May 2004 Age: 45 Posts: 1 Member: 64380 Status: Offline Thanks Meter: 0	test point .exer [pls help i need test point .exe yokuboye@yahoo .com

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
mc60 v10 problems after unlocking	AmunRe	E-Gold Based Phones	8	01-27-2005 11:17
MC60 v10 can't unlock in poland coz don't have sweeden simcard to open java patch	PSG	E-Gold Based Phones	3	07-09-2004 14:48
Mc60 V10 Unlock	COMMANDCOM	E-Gold Based Phones	5	04-22-2004 21:50
MC60 v10 - unlock?	kesic	E-Gold Based Phones	9	02-24-2004 10:22
Mc60 v10 can't unlock freia9 or another program	diocles	E-Gold Based Phones	7	02-15-2004 21:35

04-09-2004, 01:18	#2 (permalink)
ROBISH_GSM Cheater -Don't Deal with him- Join Date: Mar 2004 Location: GERMANY Age: 42 Posts: 590 Member: 60523 Status: Offline Thanks Meter: 9	me too i have th same problem with mc 60 v10 i u found any solution plz contac to me and i'll contact u if i found any solution and the same for sl 55 v16

04-09-2004, 15:58	#3 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	For Sl55 v16 look in x5x section and use search! There is a solution!

04-09-2004, 17:17	#4 (permalink)
EPAC Junior Member Join Date: Apr 2004 Posts: 2 Member: 61813 Status: Offline Thanks Meter: 0	Same problem on my MC60 v10. I built my own RS232 Serial interface and have it working on Siemens Data Suite but Freia & SEBAgsm unlocker for MC60 won't work. (All these programs setup the supply voltage to the interface chip. After messing about with various voltage supply methods I decided my hardware's OK and it's down to v10.) Logged onto forum and found you guys had same issue. Does the MC60 have a test point fix too?

04-10-2004, 12:11	#5 (permalink)
beli_the_king Freak Poster Join Date: Dec 2003 Location: Bosnia and Hercegovina @ Saraj Age: 40 Posts: 340 Member: 45907 Status: Offline Thanks Meter: 8	the MC60 needs TestPoint, if u need picture mail me [email protected]

04-14-2004, 02:21	#7 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	hi guys wich solution is working in crusider griffin and free freia9(162c)? wich test point is right? thank you for info

04-14-2004, 13:15	#9 (permalink)
sebagsm Moderator Join Date: Sep 2002 Location: Serbia/Hungary Age: 42 Posts: 1,043 Member: 15994 Status: Offline Thanks Meter: 263	Yes griffin can do it .... with testpoint ....

04-14-2004, 14:48	#11 (permalink)
beli_the_king Freak Poster Join Date: Dec 2003 Location: Bosnia and Hercegovina @ Saraj Age: 40 Posts: 340 Member: 45907 Status: Offline Thanks Meter: 8	i have SIEMENS CLIP,CRD & MARTECH it works only with TP, but it would be good to find out if it's posible to unlock it with some free soft, for the people who has no clip or martek or what else THX

04-14-2004, 19:26	#12 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	I have sent u testpoint.exe

04-16-2004, 18:03	#14 (permalink)
KoTsK No Life Poster Join Date: Nov 2002 Location: INDONESIA Posts: 986 Member: 17360 Status: Offline Thanks Meter: 1	is there still no solution for free? for locked and/or died mc60?

04-16-2004, 22:57	#15 (permalink)
danilo_nop No Life Poster Join Date: Jun 2003 Location: root Posts: 622 Member: 31049 Status: Offline Thanks Meter: 4	I repair dead mc60 whit freia 10, unlock works too