Sharp 903 Killed By Usb-smart I Need Help - GSM-Forum

ojs · 11-12-2005, 12:08

Pls I Need Help I Try To Unlock Sharp 903 With Usb Smart
After Unlocking The Phone Show No Service Then If You Try
To Go To Thr Menu The Phone Will Come Of And On Then I Try
To Flash The Phone After A While It Then Terminate And Show
Error Now Phone Is Not Communicating Again The Customer
Want To Kill Me I Don,t Know What To Do Forum I Need Help
Zulea Help Me Pls What Can I Do Pls Every Body I Need All
Your Help On How To Revive The Dead Phone I Don,t Know
What To Do.

superwing1248 · 11-12-2005, 13:53

Can you post your unlock step clear here?

RNC_EBM · 11-12-2005, 14:02

How to unlock/repair Sharp 903 and Sharp 703 phones:

- Flash all UNLOCK flashfiles (2 or 3) in your phone.
- Any flashfiles package (Euro, China, Taiwan, Japan)
can be flashed into any phone (SH903/SH703 Euro, China, Japan)
- Select phone model Sharp-703 or Sharp-903 and unlock
- Power on phone. Sometimes need hold Power ON button for at least 15 seconds!
Phone need to write some internal dates at startup.
- if you trying to restore dead phone
- To restore dead phone, after flashing, hold PowerON and # until shows
formatting on display and wait 10-20 minutes to complete.
- Allways use FULL battery or use UFS/Twister cables
(with charger connetor).

http://forum.gsmhosting.com/vbb/showthread.php?t=245572

superwing1248 · 11-13-2005, 04:08

To OJS:

Did you follow the unlock step?

Hanukkah · 11-13-2005, 11:05

Quote:

Originally Posted by ojs

Pls I Need Help I Try To Unlock Sharp 903 With Usb Smart
After Unlocking The Phone Show No Service Then If You Try
To Go To Thr Menu The Phone Will Come Of And On Then I Try
To Flash The Phone After A While It Then Terminate And Show
Error Now Phone Is Not Communicating Again The Customer
Want To Kill Me I Don,t Know What To Do Forum I Need Help
Zulea Help Me Pls What Can I Do Pls Every Body I Need All
Your Help On How To Revive The Dead Phone I Don,t Know
What To Do.

What was the condition of the battery when before you unlocked/flashed it? Try to use the universal clip type charger and fully charge your battery then try flashing the unlocked flashes.

Softway · 11-13-2005, 11:09

after flashing dont forget this step... its verry importent

- Power on phone. need hold Power ON button for at least 15 seconds!Phone need to write some internal dates at startup.

ojs · 11-14-2005, 13:48

Switch phone ON ...
Send application ...
Send flash file: "903SH_v102X_CHINA_FS_2200_2300.ssw"
Flash sent OK
Send flash file: "903SH_v102X_CHINA_FS_2800.ssw"
Flash sent OK
Send flash file: "903SH_v102X_CHINA_Main.ssw"
Flash sent OK

NOW PHONE IS COMMUNICATING WITH USB SMART UFS INTERFACE THEN AFTER FLASHING, THE PHONE IS NOT COMING UP EVEN WITH POWER AND # FOR OVER 15 MINS WHAT CAN I DO FROM HERE
I NEED HELP

crow2k4 · 11-14-2005, 16:36

till now is safe to use testmode..

Softway · 11-14-2005, 17:19

Quote:

Originally Posted by crow2k4

till now is safe to use testmode..

wrong..... flashing is absulutely safe. if u know how to....

ojs · 11-15-2005, 17:33

I Am Still Waiting For Solution Zulea Say Something What Can I Do At This Stage Forum Pls I Need Help From Everybody Hoping Someone Will Bring The Solution

superwing1248 · 11-16-2005, 00:23

Quote:

Originally Posted by ojs

Switch phone ON ...
Send application ...
Send flash file: "903SH_v102X_CHINA_FS_2200_2300.ssw"
Flash sent OK
Send flash file: "903SH_v102X_CHINA_FS_2800.ssw"
Flash sent OK
Send flash file: "903SH_v102X_CHINA_Main.ssw"
Flash sent OK
NOW PHONE IS COMMUNICATING WITH USB SMART UFS INTERFACE THEN AFTER FLASHING, THE PHONE IS NOT COMING UP EVEN WITH POWER AND # FOR OVER 15 MINS WHAT CAN I DO FROM HERE
I NEED HELP

you use the wrong flash file to unlock, this 3 file just for HK ver SX833 repair dead phone only. Please use the unlock one

crow2k4 · 11-16-2005, 16:34

@..::Tushar::...bro tll now im using testmode sulotion for me its safe to use this than to flash..

11-12-2005, 12:08	#1 (permalink)
ojs Insane Poster Join Date: Aug 2004 Age: 49 Posts: 69 Member: 76072 Status: Offline Thanks Meter: 7	Sharp 903 Killed By Usb-smart I Need Help Pls I Need Help I Try To Unlock Sharp 903 With Usb Smart After Unlocking The Phone Show No Service Then If You Try To Go To Thr Menu The Phone Will Come Of And On Then I Try To Flash The Phone After A While It Then Terminate And Show Error Now Phone Is Not Communicating Again The Customer Want To Kill Me I Don,t Know What To Do Forum I Need Help Zulea Help Me Pls What Can I Do Pls Every Body I Need All Your Help On How To Revive The Dead Phone I Don,t Know What To Do.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please HELP Sharp 703 DEAD! by USB Smart	JammerTwo	SonyEricsson (USB-Smart)	43	06-20-2006 07:36
lg 8110 killed by usb smart	YAKGIFTMAN	SonyEricsson (USB-Smart)	11	04-14-2006 16:32
902 903 killed by usb-smart	mutualmobile	SonyEricsson (USB-Smart)	3	03-14-2006 02:55
F500 killed by usb-smart	kodan	SonyEricsson (USB-Smart)	1	11-10-2005 10:23

11-12-2005, 13:53	#2 (permalink)
superwing1248 Freak Poster Join Date: Jul 2005 Posts: 215 Member: 161906 Status: Offline Thanks Meter: 0	Can you post your unlock step clear here?

11-12-2005, 14:02	#3 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: PHILIPPINES Posts: 5,294 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks Meter: 6,036	How to unlock/repair Sharp 903 and Sharp 703 phones: - Flash all UNLOCK flashfiles (2 or 3) in your phone. - Any flashfiles package (Euro, China, Taiwan, Japan) can be flashed into any phone (SH903/SH703 Euro, China, Japan) - Select phone model Sharp-703 or Sharp-903 and unlock - Power on phone. Sometimes need hold Power ON button for at least 15 seconds! Phone need to write some internal dates at startup. - if you trying to restore dead phone - To restore dead phone, after flashing, hold PowerON and # until shows formatting on display and wait 10-20 minutes to complete. - Allways use FULL battery or use UFS/Twister cables (with charger connetor). http://forum.gsmhosting.com/vbb/showthread.php?t=245572

11-13-2005, 04:08	#4 (permalink)
superwing1248 Freak Poster Join Date: Jul 2005 Posts: 215 Member: 161906 Status: Offline Thanks Meter: 0	To OJS: Did you follow the unlock step?

11-13-2005, 11:09	#6 (permalink)
Softway No Life Poster Join Date: May 2005 Posts: 2,681 Member: 143889 Status: Offline Sonork: 100.1584685 Thanks Meter: 341	after flashing dont forget this step... its verry importent - Power on phone. need hold Power ON button for at least 15 seconds!Phone need to write some internal dates at startup.

11-14-2005, 13:48	#7 (permalink)
ojs Insane Poster Join Date: Aug 2004 Age: 49 Posts: 69 Member: 76072 Status: Offline Thanks Meter: 7	Switch phone ON ... Send application ... Send flash file: "903SH_v102X_CHINA_FS_2200_2300.ssw" Flash sent OK Send flash file: "903SH_v102X_CHINA_FS_2800.ssw" Flash sent OK Send flash file: "903SH_v102X_CHINA_Main.ssw" Flash sent OK NOW PHONE IS COMMUNICATING WITH USB SMART UFS INTERFACE THEN AFTER FLASHING, THE PHONE IS NOT COMING UP EVEN WITH POWER AND # FOR OVER 15 MINS WHAT CAN I DO FROM HERE I NEED HELP

11-14-2005, 16:36	#8 (permalink)
crow2k4 Freak Poster Join Date: Nov 2004 Age: 24 Posts: 103 Member: 93744 Status: Offline Thanks Meter: 1	till now is safe to use testmode..

11-15-2005, 17:33	#10 (permalink)
ojs Insane Poster Join Date: Aug 2004 Age: 49 Posts: 69 Member: 76072 Status: Offline Thanks Meter: 7	I Am Still Waiting For Solution Zulea Say Something What Can I Do At This Stage Forum Pls I Need Help From Everybody Hoping Someone Will Bring The Solution

11-16-2005, 16:34	#12 (permalink)
crow2k4 Freak Poster Join Date: Nov 2004 Age: 24 Posts: 103 Member: 93744 Status: Offline Thanks Meter: 1	@..::Tushar::...bro tll now im using testmode sulotion for me its safe to use this than to flash..