help with unlocking konka c926 - GSM-Forum

micgregelectron · 04-23-2006, 12:23

hi, i have a problem i can not unlock konka i have made pinout with a samsung a300 cable now soft is ok but it give me this :
COM1 selected
Device: Konka C926
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Err: boot error[01]
Release Power button now !
Boot Fail
Finished
Remove/Install battery now !
Time used: 38 sec
what is i not right pls help.

**InfinitySupport** · 04-23-2006, 18:44

Hi,

Change Rx <-> Tx and try again.
For sure it's cable problem.

micgregelectron · 04-24-2006, 00:54

hi,

i change rx>tx same problem where i can bye a ceble ready

**InfinitySupport** · 04-24-2006, 08:00

Please, double check cable.
Also don't forget to HOLD power button during boot process.

The Beast · 04-24-2006, 18:05

make sure none of the pins are touching each other, I had that problem before and after I double checked the cable it worked ok. As InfinitySupport said, HOLD power button during boot process

Lucky Titico · 04-28-2006, 14:45

unlocking konka failed...use 18pins follow cable pin out no luck...

**InfinitySupport** · 04-28-2006, 16:08

Please, double check cable. Abd remember that pins count from left to right (keyboard up).

Lucky Titico · 04-29-2006, 03:31

[IMG]

[/IMG] unlocking failed...

Lucky Titico · 04-29-2006, 07:50

Quote:

Originally Posted by The Beast

make sure none of the pins are touching each other, I had that problem before and after I double checked the cable it worked ok. As InfinitySupport said, HOLD power button during boot process

have you unlocked your phone?

The Beast · 04-29-2006, 15:36

Yes I have unlocked alot of them already, and also able to read flash.

Lucky Titico · 04-29-2006, 17:19

Quote:

Originally Posted by The Beast

Yes I have unlocked alot of them already, and also able to read flash.

sir screenshot of your cable and instruction pls

zinoubinabil · 04-29-2006, 17:32

try to make the correct cable & all will be ok

mrfixit · 04-30-2006, 14:23

unlocked a lot too, thanks infinity

Lucky Titico · 05-01-2006, 11:52

COM1 selected
Device: Konka C926
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing...
Release Power button now !
Boot Done
Initialize...
Initialize Fail
Finished
Remove/Install battery now !
Time used: 31 sec

LOUAI2005 · 05-01-2006, 12:07

Quote:

Originally Posted by aian

COM1 selected
Device: Konka C926
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing...
Release Power button now !
Boot Done
Initialize...
Initialize Fail
Finished
Remove/Install battery now !
Time used: 31 sec

chek your cable bp

br louai2005

04-23-2006, 12:23	#1 (permalink)
micgregelectron Junior Member Join Date: Jun 2005 Age: 62 Posts: 11 Member: 157067 Status: Offline Thanks Meter: 0	help with unlocking konka c926 hi, i have a problem i can not unlock konka i have made pinout with a samsung a300 cable now soft is ok but it give me this : COM1 selected Device: Konka C926 Checking data, wait... Action: Read flash Boot... Press and HOLD Power button now ! Err: boot error[01] Release Power button now ! Boot Fail Finished Remove/Install battery now ! Time used: 38 sec what is i not right pls help.

04-29-2006, 03:31	#8 (permalink)
Lucky Titico Freak Poster Join Date: Feb 2004 Location: Moon Age: 50 Posts: 279 Member: 55357 Status: Offline Thanks Meter: 12	[IMG][/IMG] unlocking failed...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help with unlock to vodafone 226 facing with this error	naeem janjua	Infinity-Box	15	09-01-2011 12:33
Samsung T639 Not supported with NS, pls help with unlocking?	Boshko_Alfa	NSPRO	24	02-28-2008 11:37
Help to unlock Konka phone	Ian	Various	5	09-04-2007 13:34
need to unlock konka c926 help	taariqmajid	Infinity-Box	1	03-06-2007 13:26
Need help with unlock k700i and t610 new version with total multiserver!	mobile_2003	TOTAL MultiServer	4	10-21-2004 13:57

04-23-2006, 18:44	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hi, Change Rx <-> Tx and try again. For sure it's cable problem.

04-24-2006, 00:54	#3 (permalink)
micgregelectron Junior Member Join Date: Jun 2005 Age: 62 Posts: 11 Member: 157067 Status: Offline Thanks Meter: 0	hi, i change rx>tx same problem where i can bye a ceble ready

04-24-2006, 08:00	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Please, double check cable. Also don't forget to HOLD power button during boot process.

04-24-2006, 18:05	#5 (permalink)
The Beast Freak Poster Join Date: Apr 2004 Age: 39 Posts: 328 Member: 61620 Status: Offline Thanks Meter: 5	make sure none of the pins are touching each other, I had that problem before and after I double checked the cable it worked ok. As InfinitySupport said, HOLD power button during boot process

04-28-2006, 14:45	#6 (permalink)
Lucky Titico Freak Poster Join Date: Feb 2004 Location: Moon Age: 50 Posts: 279 Member: 55357 Status: Offline Thanks Meter: 12	unlocking konka failed...use 18pins follow cable pin out no luck...

04-28-2006, 16:08	#7 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Please, double check cable. Abd remember that pins count from left to right (keyboard up).

04-29-2006, 15:36	#10 (permalink)
The Beast Freak Poster Join Date: Apr 2004 Age: 39 Posts: 328 Member: 61620 Status: Offline Thanks Meter: 5	Yes I have unlocked alot of them already, and also able to read flash.

04-29-2006, 17:32	#12 (permalink)
zinoubinabil Product Supporter Join Date: Sep 2004 Location: In the right way Posts: 2,748 Member: 84268 Status: Offline Sonork: 100.114149 Thanks Meter: 2,569	try to make the correct cable & all will be ok

04-30-2006, 14:23	#13 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	unlocked a lot too, thanks infinity

05-01-2006, 11:52	#14 (permalink)
Lucky Titico Freak Poster Join Date: Feb 2004 Location: Moon Age: 50 Posts: 279 Member: 55357 Status: Offline Thanks Meter: 12	COM1 selected Device: Konka C926 Checking data, wait... Action: Read flash Boot... Press and HOLD Power button now ! Connecting, wait... Initializing... Release Power button now ! Boot Done Initialize... Initialize Fail Finished Remove/Install battery now ! Time used: 31 sec