==** V3r 0A-30 & 52 (0E_C0_13R) Repair Solution :) **== - GSM-Forum

Ja\/\/aD · 11-23-2006, 05:38

DOWNLOAD

Download

Download

[glow=red]**V3r 0A-30 & 52 (0E_C0_13R)Repair Solution **[/glow]

(booloader Problem, 3 sec. blink, dead)

[glow=lime]No Need Smart-clip & MSS-4 [/glow]

1: make Test point v3r
2: Blink Problem need Repair PDS
3: always says Bootloader mode no need Repair Pds
4: open V3r Repair Flash and flash phone (via P2k tool have this Folder)
5: wait 10-15 min Just done and auto powering on mobile ...Enjoy

(have any Problem pls. Post Here)

ReGards

[glow=red].::Ja\/\/aD::.[/glow]

Note: this file password: .::Ja\/\/aD::.

bep-bep · 11-23-2006, 06:27

is it possible now to unlock this phone with bl 0a.52 after this repair ?

cover_one · 11-24-2006, 19:01

not work on V3r 0A-30 always says Bootloader mode even after success one flash phone say Bootloader mode any oder ideea ?

here is the log
Processing input file:
Processed 8 codegroups
Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Sending RAM loader ...
RAM loader loaded OK
Erase flash...
Flashing codegroups ...
Flashing codegroup 'cg1.smg' to 10092000
Flashing codegroup 'cg2.smg' to 111C0000
Flashing codegroup 'cg3.smg' to 10040000
Flashing codegroup 'cg4.smg' to 11040000
Flashing codegroup 'cg5.smg' to 11F80000
Flashing codegroup 'cg6.smg' to 10E00000
Flashing codegroup 'cg7.smg' to 11FE0000
Checking checksums
Verifying checksum for 'cg1.smg' (10092000 to 10DFFFFF)
Verifying checksum for 'cg2.smg' (111C0000 to 11F5FFFF)
Verifying checksum for 'cg3.smg' (10040000 to 10091FFF)
Verifying checksum for 'cg4.smg' (11040000 to 111BFFFF)
Verifying checksum for 'cg5.smg' (11F80000 to 11F9FFFF)
Verifying checksum for 'cg6.smg' (10E00000 to 1103FFFF)
Verifying checksum for 'cg7.smg' (11FE0000 to 11FE07FF)
Restarting phone
Done flashing.

erasing procces wass fast 1 sec can be that the problem that the phone have always same firmaware even after the repair flash/solution ?

Ja\/\/aD · 11-24-2006, 20:30

Quote:

Originally Posted by cover_one

not work on V3r 0A-30 always says Bootloader mode even after success one flash phone say Bootloader mode any oder ideea ?

here is the log
Processing input file:
Processed 8 codegroups
Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Sending RAM loader ...
RAM loader loaded OK
Erase flash...
Flashing codegroups ...
Flashing codegroup 'cg1.smg' to 10092000
Flashing codegroup 'cg2.smg' to 111C0000
Flashing codegroup 'cg3.smg' to 10040000
Flashing codegroup 'cg4.smg' to 11040000
Flashing codegroup 'cg5.smg' to 11F80000
Flashing codegroup 'cg6.smg' to 10E00000
Flashing codegroup 'cg7.smg' to 11FE0000
Checking checksums
Verifying checksum for 'cg1.smg' (10092000 to 10DFFFFF)
Verifying checksum for 'cg2.smg' (111C0000 to 11F5FFFF)
Verifying checksum for 'cg3.smg' (10040000 to 10091FFF)
Verifying checksum for 'cg4.smg' (11040000 to 111BFFFF)
Verifying checksum for 'cg5.smg' (11F80000 to 11F9FFFF)
Verifying checksum for 'cg6.smg' (10E00000 to 1103FFFF)
Verifying checksum for 'cg7.smg' (11FE0000 to 11FE07FF)
Restarting phone
Done flashing.

erasing procces wass fast 1 sec can be that the problem that the phone have always same firmaware even after the repair flash/solution ?

i think this problem creating after unlocking with smart clip

u have auto backup Security file ur smart clip backup folder

restore this security backup file....i hope solve ur problem

2nd Repair PDS via smart clip

pls. post result.......

br

Ja\/\/aD · 11-24-2006, 20:31

Quote:

Originally Posted by bep-bep

is it possible now to unlock this phone with bl 0a.52 after this repair ?

not posible my dear.......this time

cover_one · 11-25-2006, 12:12

yes that was unlocked troug smart-clip afer 1 week the customer it's back with this problem always boot loader i have made restore security then repair and full flash but no success

Ja\/\/aD · 11-25-2006, 16:33

Quote:

Originally Posted by cover_one

yes that was unlocked troug smart-clip afer 1 week the customer it's back with this problem always boot loader i have made restore security then repair and full flash but no success

i havesome problem .....but solved my problem well....and send my friend 4-5 phone same problem and solved all.......2 phone have 3 sec blink problem...
and others boot problems....

repair pds
restore security backup
then flasj again with p2k tool with repair flash and pls post log

br

helplease · 11-25-2006, 17:29

What exactly is the password?

I have tried:

.:JaWaD:.
jawad
JaWaD

but non of them worked.

Ja\/\/aD · 11-25-2006, 17:31

Quote:

Originally Posted by helplease

What exactly is the password?

I have tried:

.:JaWaD:.
jawad
JaWaD

but non of them worked.

.::Ja\/\/aD::.

copy and paste
same is my user name

helplease · 11-25-2006, 17:36

I just tried

.::JaWaD::.

with capital J, W and D

and I got this error message:

Error #: 25116
Error: Bad block

Ja\/\/aD · 11-25-2006, 17:40

Quote:

Originally Posted by helplease

I just tried

.::JaWaD::.

with capital J, W and D

and I got this error message:

Error #: 25116
Error: Bad block

.::J(cap)a(small) \ / \ / a(small) D (cap)

just copy and paste check COPY ONLY WORDS no space ...
very easy man

helplease · 11-25-2006, 17:45

Ok i got it.

Sorry about that man.

I got the file. Now I am flashing it at the moment.

Will post resut in while.

Ja\/\/aD · 11-25-2006, 17:46

don't worry .....i hope solved ur problem

br

helplease · 11-25-2006, 17:56

Finish flashing.

First let me say that the phone was just going into boot load mode.

Now that I flashed it with the repair flash file comes on for 3 seconds and then off.

From your instuction I would need to repair PDS.

But I don't know how to.

So how do you go about doing that.

Ja\/\/aD · 11-25-2006, 18:19

Quote:

Originally Posted by helplease

Finish flashing.

First let me say that the phone was just going into boot load mode.

Now that I flashed it with the repair flash file comes on for 3 seconds and then off.

From your instuction I would need to repair PDS.

But I don't know how to.

So how do you go about doing that.

i think this problem creating after unlocking with smart clip

u have auto backup Security file ur smart clip backup folder

restore this security backup file....i hope solve ur problem

2nd Repair PDS via smart clip

pls. post result.......

br

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
v3r 0a.30 always error on unlocking..	pasakalye	Smart-Clip	10	09-22-2008 08:46
How To Downgrade 0a.52 Boot To 0a.30 Step By Step Here	υИқИΘШИ®	Motorola P2k	4	01-30-2007 22:00
v3r 0a.30 "prepare phone" failed - Log file	Gump	Smart-Clip	1	01-11-2007 21:51
V3r 0A.30 "prepare phone" failed	Gump	Smart-Clip	4	01-11-2007 09:43
Wanted v3r 0a.30 bootloader	twisterfan	Motorola P2k	10	01-05-2007 14:41

11-23-2006, 06:27	#2 (permalink)
bep-bep Registered User Join Date: Mar 2004 Age: 47 Posts: 281 Member: 57367 Status: Offline Thanks Meter: 12	is it possible now to unlock this phone with bl 0a.52 after this repair ?

11-24-2006, 19:01	#3 (permalink)
cover_one No Life Poster Join Date: Dec 2004 Location: In Your Room Age: 47 Posts: 587 Member: 97299 Status: Offline Thanks Meter: 43	not work on V3r 0A-30 always says Bootloader mode even after success one flash phone say Bootloader mode any oder ideea ? here is the log Processing input file: Processed 8 codegroups Connecting to phone ... Connected to: 'Motorola Flash' Connected OK Sending RAM loader ... RAM loader loaded OK Erase flash... Flashing codegroups ... Flashing codegroup 'cg1.smg' to 10092000 Flashing codegroup 'cg2.smg' to 111C0000 Flashing codegroup 'cg3.smg' to 10040000 Flashing codegroup 'cg4.smg' to 11040000 Flashing codegroup 'cg5.smg' to 11F80000 Flashing codegroup 'cg6.smg' to 10E00000 Flashing codegroup 'cg7.smg' to 11FE0000 Checking checksums Verifying checksum for 'cg1.smg' (10092000 to 10DFFFFF) Verifying checksum for 'cg2.smg' (111C0000 to 11F5FFFF) Verifying checksum for 'cg3.smg' (10040000 to 10091FFF) Verifying checksum for 'cg4.smg' (11040000 to 111BFFFF) Verifying checksum for 'cg5.smg' (11F80000 to 11F9FFFF) Verifying checksum for 'cg6.smg' (10E00000 to 1103FFFF) Verifying checksum for 'cg7.smg' (11FE0000 to 11FE07FF) Restarting phone Done flashing. erasing procces wass fast 1 sec can be that the problem that the phone have always same firmaware even after the repair flash/solution ?

11-25-2006, 12:12	#6 (permalink)
cover_one No Life Poster Join Date: Dec 2004 Location: In Your Room Age: 47 Posts: 587 Member: 97299 Status: Offline Thanks Meter: 43	yes that was unlocked troug smart-clip afer 1 week the customer it's back with this problem always boot loader i have made restore security then repair and full flash but no success

11-25-2006, 17:29	#8 (permalink)
helplease Freak Poster Join Date: May 2006 Posts: 187 Member: 284024 Status: Offline Thanks Meter: 0	What exactly is the password? I have tried: .:JaWaD:. jawad JaWaD but non of them worked.

11-25-2006, 17:36	#10 (permalink)
helplease Freak Poster Join Date: May 2006 Posts: 187 Member: 284024 Status: Offline Thanks Meter: 0	I just tried .::JaWaD::. with capital J, W and D and I got this error message: Error #: 25116 Error: Bad block

11-25-2006, 17:45	#12 (permalink)
helplease Freak Poster Join Date: May 2006 Posts: 187 Member: 284024 Status: Offline Thanks Meter: 0	Ok i got it. Sorry about that man. I got the file. Now I am flashing it at the moment. Will post resut in while.

11-25-2006, 17:46	#13 (permalink)
Ja\/\/aD No Life Poster $Ja\/\/aD's Avatar$ Join Date: Sep 2004 Location: Aunlock Age: 43 Posts: 18,049 Member: 80354 Status: Offline Sonork: 100.1577575 Thanks Meter: 21,659	don't worry .....i hope solved ur problem br

11-25-2006, 17:56	#14 (permalink)
helplease Freak Poster Join Date: May 2006 Posts: 187 Member: 284024 Status: Offline Thanks Meter: 0	Finish flashing. First let me say that the phone was just going into boot load mode. Now that I flashed it with the repair flash file comes on for 3 seconds and then off. From your instuction I would need to repair PDS. But I don't know how to. So how do you go about doing that.