How to repair MC922, 926, 939, 940, unlock , flashing, eeprom repair, etc... - GSM-Forum

06-23-2002, 22:30

Don't mail me any more. I am bussy, so here is what you need:
1. Phone ID
2. Flashes
3. Sagemdr
4. Sagemt logger
5. Lord's free calculator
6. Telech flasher
7. Pony prog interface
8. Pony prog soft
9. Eeprom backups - bin files

You can unlock and repair moust of Sagems above using these things.

Phone ID
You can get it using few solutions -
1. With sagemt logger
2. You can calculate it using Lord's calculator
3. You can read it from Dallas chip using iButton soft and MBUS interface
All of these you can find if you search trough this forum. It's not so hard, and please do not beg me for it.

Flashes
You can find it on many sites, but all files aren't tested by me, so it's best to go on my tripod space. This is adress:

ftp://bu508df:[email protected]/sagem

Thre you'll find Telech Flasher as well.
You can use any ftp manager for download, if you have problem with your browsers.

Sagemdr
Use version 14Cplus - you can download it from many sites, same as SAGEMT logger, Pony prog, and Lord's calculator.

Lords calculator can calculate right code for all MC9xx Sagems.
If you have phone with destroyed field 191, and protected field 251, you must downgroade it to lower version using flasher and flashes from my site. After that you can copy field 251 to field 191 and calculate code.

Protected fields you can find on this forum also, so, please use your brain before you ask. I am willing to help, but not to lazy peoples, so, you must proove you're not lazy.
Regards !

mr_x4you · 06-23-2002, 22:47

I'm lazy, although I've repaired many sagem phones !

xkux · 06-24-2002, 04:53

hi legija

tnks.

best regards

06-24-2002, 06:21

How to get phone ID ?
First way is to read it using "sagemt logger" - just by reading log. If logger can't read it out, we can calculate ID from Imei and field 191, using Lord's free calculator.
Second way is to use iButton soft, and using MBUS interface to read it directly form Dallas chip.
When we have phone ID, we can repair almost all sagem phones.If eeprom fields aren't damaged too much, we can use sagemdr to corect cheksums, and unlock phone. If phone have flash with protected fields, we must flash it to lower version - with flash which don't have protected fields. Those flashes you can find on my tripod space, and link is above. If you have damaged eeprom, and you can't connect it to PC, you must write new bin using pony prog. I'll put some bins which i have on my site soon, but if you have working bins you can also upload it.
Corecting cheksums - How to ?
First, chek IMEI- if IMEI is wrong you can't repair phone without repairing IMEI. For this you can use "change imei" function in sagemdr. Read IMEI from back sticker and enter it. Remember, it is reversed - if your imei is 01 01 01, you must enter 10 10 10 ...
1. Start sagemdr, choose com port and speed
2. Press "9"
3. When sagemdr asks for phone ID enter it manualy
4. For field 191 choose "standard values"
5. For field 251 choose "manualy enter unlock data" and enter "40"
6. For all other fields use "standard values"
7. When sagemdr asks "how many protected fields",
for MC 922 and 926 enter 13,
1.185,
2.211,
3.227,
4.235,
5.236,
6.257,
7.268,
8.995,
9.5250,
10.5374,
11.5375,
12.16128
13.16129

For MC939 and 940 enter 11 -

1. 185
2. 227
3. 268
4. 995
5. 5120
6. 16128
7. 16129
8. 16140
9. 16141
10.16177
11.16178
Allways choose "1" when sagemdr ask what to do.
After this, your phone should be unlocked and working.
How to flash phone ?
First, you need full charged battery, and of course, corect flash file. But, before you do anything, you need read log from phone to get phone ID ! ! !
After that you can flash phone. I've flashed many Sagems MC922 and 926 using same flash file which contain Croatian - on some phones it work normaly, but on some phones cheksums was damaged,so, i was forced to repair it. For this you need phone ID, remember ! In some cases, you'll need to flash phone, just to be able to read field 251 - if field 191 is damaged, and calculator can't calculate ID and unlock code. So, you need to read log first, and after flashin read field 251, and replace data for field 191 in log. Now you can calcualte ID, and repair and unlock phone. I've tested this on MC922 and MC926.

If someone also have something usefull, please post it here.

ErlanH · 06-24-2002, 22:40

too bad:

"530 Your account has been temporarily suspended for excess bandwidth consumption, please try again later."

EH

jerry77 · 06-24-2002, 22:54

This solution works on MC959?

simonb · 06-25-2002, 12:55

Hi this method worked for my SAGEM Ver:FT3,4D thanks you m8 i now have a working phone.

crossings · 07-05-2002, 01:20

whats the pass forftp://bu508df:[email protected]/sagem

thanks

doctorvatson · 07-05-2002, 04:20

usefull topic

bre786 · 07-21-2002, 13:40

What is the pass of the site forftp://bu508df:[email protected]/sagem ?

br
bre786

fonec · 07-21-2002, 18:06

the link sir nedd pass word please tell me about pass

fonec · 07-21-2002, 18:19

can help me to unlock sagem mw 936 simlocked

s4sajii · 07-22-2002, 17:10

its asks for the pwd...... and i donnt know the pwd... maybe its changed by the owener...

nedkokp · 07-23-2002, 03:47

how i can repair sagem 930 and 926 without external eeprom

08-16-2002, 22:05

mc926 FT3,4D - hash table 21

http://www.mladikovine.com/mc926 FT3,4D.jpg

MC930 - hash table 00

http://www.mladikovine.com/MC930_protected_fields.jpg

MC939 - hash table 00

http://www.mladikovine.com/MC939_protected fields.jpg

Sory guys, Tripod peoples have disabled my account, coz to many peoples was downloading those flash files. Ill upload them on my www.iespana.es site soon.

06-23-2002, 22:30	#1 (permalink)
legija Guest Posts: n/a Member:	How to repair MC922, 926, 939, 940, unlock , flashing, eeprom repair, etc... Don't mail me any more. I am bussy, so here is what you need: 1. Phone ID 2. Flashes 3. Sagemdr 4. Sagemt logger 5. Lord's free calculator 6. Telech flasher 7. Pony prog interface 8. Pony prog soft 9. Eeprom backups - bin files You can unlock and repair moust of Sagems above using these things. Phone ID You can get it using few solutions - 1. With sagemt logger 2. You can calculate it using Lord's calculator 3. You can read it from Dallas chip using iButton soft and MBUS interface All of these you can find if you search trough this forum. It's not so hard, and please do not beg me for it. Flashes You can find it on many sites, but all files aren't tested by me, so it's best to go on my tripod space. This is adress: ftp://bu508df:[email protected]/sagem Thre you'll find Telech Flasher as well. You can use any ftp manager for download, if you have problem with your browsers. Sagemdr Use version 14Cplus - you can download it from many sites, same as SAGEMT logger, Pony prog, and Lord's calculator. Lords calculator can calculate right code for all MC9xx Sagems. If you have phone with destroyed field 191, and protected field 251, you must downgroade it to lower version using flasher and flashes from my site. After that you can copy field 251 to field 191 and calculate code. Protected fields you can find on this forum also, so, please use your brain before you ask. I am willing to help, but not to lazy peoples, so, you must proove you're not lazy. Regards !

06-24-2002, 04:53	#3 (permalink)
xkux Freak Poster Join Date: Nov 2000 Location: In Front Of PC Age: 54 Posts: 119 Member: 2662 Status: Offline Thanks Meter: 2	hi legija tnks. best regards Last edited by xkux; 06-24-2002 at 05:37.

07-05-2002, 01:20	#8 (permalink)
crossings No Life Poster Join Date: Mar 2002 Location: LONDON Age: 58 Posts: 790 Member: 9897 Status: Offline Thanks Meter: 7	hi ,please give the password whats the pass forftp://bu508df:[email protected]/sagem thanks

07-23-2002, 03:47	#14 (permalink)
nedkokp Insane Poster Join Date: Jun 2001 Posts: 75 Member: 4987 Status: Offline Thanks Meter: 0	witout external eeprom how i can repair sagem 930 and 926 without external eeprom

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to know the Control ID, Board ID, LCD ID and etc	dragongel	Game Consoles & Mp3/4 , HD players	1	09-06-2009 18:33
Treo 700p/ how to get certain contact categories from SD card/backup/desktop/etc.	srfoot	PalmOS /HP and others	1	06-21-2007 11:40
How To Adjust Contrast In Cf62 With Joker Or Eeprom Tool	sofiame2006	E-Gold Based Phones	1	03-28-2006 18:37
Please help! How to open MC922 Call-ID?	ooifk	Infineon C16X M51 & ARM7 M52 BASED	2	10-28-2001 05:58

06-23-2002, 22:47	#2 (permalink)
mr_x4you Registered User Join Date: Jun 2001 Location: x Posts: 3,295 Member: 4989 Status: Offline Thanks Meter: 13	I'm lazy, although I've repaired many sagem phones !

06-24-2002, 06:21	#4 (permalink)
legija Guest Posts: n/a Member:	How to get phone ID ? First way is to read it using "sagemt logger" - just by reading log. If logger can't read it out, we can calculate ID from Imei and field 191, using Lord's free calculator. Second way is to use iButton soft, and using MBUS interface to read it directly form Dallas chip. When we have phone ID, we can repair almost all sagem phones.If eeprom fields aren't damaged too much, we can use sagemdr to corect cheksums, and unlock phone. If phone have flash with protected fields, we must flash it to lower version - with flash which don't have protected fields. Those flashes you can find on my tripod space, and link is above. If you have damaged eeprom, and you can't connect it to PC, you must write new bin using pony prog. I'll put some bins which i have on my site soon, but if you have working bins you can also upload it. Corecting cheksums - How to ? First, chek IMEI- if IMEI is wrong you can't repair phone without repairing IMEI. For this you can use "change imei" function in sagemdr. Read IMEI from back sticker and enter it. Remember, it is reversed - if your imei is 01 01 01, you must enter 10 10 10 ... 1. Start sagemdr, choose com port and speed 2. Press "9" 3. When sagemdr asks for phone ID enter it manualy 4. For field 191 choose "standard values" 5. For field 251 choose "manualy enter unlock data" and enter "40" 6. For all other fields use "standard values" 7. When sagemdr asks "how many protected fields", for MC 922 and 926 enter 13, 1.185, 2.211, 3.227, 4.235, 5.236, 6.257, 7.268, 8.995, 9.5250, 10.5374, 11.5375, 12.16128 13.16129 For MC939 and 940 enter 11 - 1. 185 2. 227 3. 268 4. 995 5. 5120 6. 16128 7. 16129 8. 16140 9. 16141 10.16177 11.16178 Allways choose "1" when sagemdr ask what to do. After this, your phone should be unlocked and working. How to flash phone ? First, you need full charged battery, and of course, corect flash file. But, before you do anything, you need read log from phone to get phone ID ! ! ! After that you can flash phone. I've flashed many Sagems MC922 and 926 using same flash file which contain Croatian - on some phones it work normaly, but on some phones cheksums was damaged,so, i was forced to repair it. For this you need phone ID, remember ! In some cases, you'll need to flash phone, just to be able to read field 251 - if field 191 is damaged, and calculator can't calculate ID and unlock code. So, you need to read log first, and after flashin read field 251, and replace data for field 191 in log. Now you can calcualte ID, and repair and unlock phone. I've tested this on MC922 and MC926. If someone also have something usefull, please post it here.

06-24-2002, 22:40	#5 (permalink)
ErlanH Freak Poster Join Date: Jan 2002 Location: Enschede, The Netherlands Age: 41 Posts: 333 Member: 8594 Status: Offline Thanks Meter: 13	too bad: "530 Your account has been temporarily suspended for excess bandwidth consumption, please try again later." EH

06-24-2002, 22:54	#6 (permalink)
jerry77 No Life Poster Join Date: Jan 2002 Posts: 874 Member: 8696 Status: Offline Thanks Meter: 45	This solution works on MC959?

06-25-2002, 12:55	#7 (permalink)
simonb Freak Poster Join Date: Jan 2001 Location: Kenya East Africa Posts: 148 Member: 2957 Status: Offline Thanks Meter: 0	Hi this method worked for my SAGEM Ver:FT3,4D thanks you m8 i now have a working phone.

07-05-2002, 04:20	#9 (permalink)
doctorvatson No Life Poster Join Date: Aug 2001 Location: Russia Moscow Age: 46 Posts: 567 Member: 5889 Status: Offline Thanks Meter: 0	usefull topic

07-21-2002, 13:40	#10 (permalink)
bre786 Freak Poster Join Date: Sep 2001 Posts: 402 Member: 6200 Status: Offline Sonork: 100.33330 Thanks Meter: 66	What is the pass of the site forftp://bu508df:[email protected]/sagem ? br bre786

07-21-2002, 18:06	#11 (permalink)
fonec No Life Poster Join Date: Apr 2002 Location: egypt Age: 54 Posts: 5,072 Member: 11101 Status: Offline Sonork: 100.1641000 Thanks Meter: 1,783	the link sir nedd pass word please tell me about pass

07-21-2002, 18:19	#12 (permalink)
fonec No Life Poster Join Date: Apr 2002 Location: egypt Age: 54 Posts: 5,072 Member: 11101 Status: Offline Sonork: 100.1641000 Thanks Meter: 1,783	can help me to unlock sagem mw 936 simlocked

07-22-2002, 17:10	#13 (permalink)
s4sajii Banned Join Date: Oct 2001 Location: JMB Age: 49 Posts: 1,226 Member: 6919 Status: Offline Thanks Meter: 12	its asks for the pwd...... and i donnt know the pwd... maybe its changed by the owener...

08-16-2002, 22:05	#15 (permalink)
legija Guest Posts: n/a Member:	mc926 FT3,4D - hash table 21 http://www.mladikovine.com/mc926 FT3,4D.jpg MC930 - hash table 00 http://www.mladikovine.com/MC930_protected_fields.jpg MC939 - hash table 00 http://www.mladikovine.com/MC939_protected fields.jpg Sory guys, Tripod peoples have disabled my account, coz to many peoples was downloading those flash files. Ill upload them on my www.iespana.es site soon.