How to repair Motorola phones here ! - GSM-Forum

GsmMunna · 06-13-2008, 14:03

Hi,

This is the list of common problems with Motorola phones, and ways to repair it :

PH_CODE_SIG_ERROR: xx

Phone firmware signature does not match ! To repair this problem flash phone with ******* FIRMWARE ! DO NOT use "Repair" button!

MEM_MAP_BLANK Service Req'd

Phone firmware is erased. To repair this problem, flash phone with ******* flash file. DO NOT use "Repair" button !

SW Version: NOT FOUND

Phone has erased PDS. To repair this problem allways flash phone with ******* file, and if problem persists PRESS REPAIR button

When insert battery, phone shows:

ERROR:
DE
AD

Flash chip is damaged, and it needs to be replaced. After replacement, You have to perform flashing, PDS repair and IMEI write procedure.

When insert battery, phone shows:

ERROR:
DAB

Or

ERROR:
0

Bootcore security does not match. There are two ways to repair it:
Press REPAIR button. If You get "Unable to connect" perform REPAIR using TEST POINT !

When insert battery phone starts in BOOTLOADER mode with NO ERRORS

There is two reasons for this:
- Flash Chip OTP does not match CPU SN To repair this problem, WRITE IMEI to phone

- Flash Chip is damaged and needs to be replaced

That is most common problems with p2k familly in motorola phones. If You have different problem, please report it in this topic.

Munna.

Originally posted at www.**************** .

akhil_bbsr · 06-13-2008, 14:05

ohhhh.......great contribution ....

.:Nadim:. · 06-13-2008, 14:38

Realy Great Info Thanks Bro..

joni_rajpura · 06-13-2008, 15:02

yes that is real good info good work by gsm munna thx. a lot

calvinpower · 06-13-2008, 17:09

keepit up bro
thanks

kishalayabiswas · 06-13-2008, 14:50

very useful information from great supporter

bpcentergtk1 · 06-13-2008, 18:23

yes gsmmunna is a best product supporter in universe

a_upadhyay · 06-16-2008, 09:22

Really you r great dear

amralkareem · 06-16-2008, 10:21

Realy Great Info Thanks Bro..

OUSKHMANE · 06-16-2008, 10:43

very useful information keepit up bro
thanks

akshay · 06-16-2008, 13:49

good contribution..... munna...

Goter_Unlock · 06-16-2008, 21:53

thanks..... nice info

vi element · 06-17-2008, 08:16

Love this info...

How about error when we in flash operation.. (sorry i forget the code)

its kinda...

error
***
***

GsmXplorer · 06-17-2008, 17:07

Thats really wonderfull job done by Munna bhai thanx
Regards

excelpass · 07-15-2008, 08:43

how to do after change flash ic L6? when i press connect it will say unknown flash chip 0000 8988

06-13-2008, 14:03	#1 (permalink)
GsmMunna No Life Poster Join Date: May 2004 Location: A ROUGH ROAD LEADS 2 THE STARS Posts: 3,452 Member: 66937 Status: Offline Thanks Meter: 5,053	How to repair Motorola phones here ! Hi, This is the list of common problems with Motorola phones, and ways to repair it : PH_CODE_SIG_ERROR: xx Phone firmware signature does not match ! To repair this problem flash phone with ***** FIRMWARE ! DO NOT use "Repair" button! MEM_MAP_BLANK Service Req'd Phone firmware is erased. To repair this problem, flash phone with *** flash file. DO NOT use "Repair" button ! SW Version: NOT FOUND Phone has erased PDS. To repair this problem allways flash phone with *** file, and if problem persists PRESS REPAIR button When insert battery, phone shows: ERROR: DE AD Flash chip is damaged, and it needs to be replaced. After replacement, You have to perform flashing, PDS repair and IMEI write procedure. When insert battery, phone shows: ERROR: DAB Or ERROR: 0 Bootcore security does not match. There are two ways to repair it: Press REPAIR button. If You get "Unable to connect" perform REPAIR using TEST POINT ! When insert battery phone starts in BOOTLOADER mode with NO ERRORS There is two reasons for this: - Flash Chip OTP does not match CPU SN To repair this problem, WRITE IMEI to phone - Flash Chip is damaged and needs to be replaced That is most common problems with p2k familly in motorola phones. If You have different problem, please report it in this topic. Munna. Originally posted at www.************** . Last edited by legija; 06-13-2008 at 19:38. Reason: Info updated

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to repair dead phones or phones with blue screen!	Chris02	E-Gold Based Phones	105	09-07-2005 19:05
St55 Startup Hang Prob !!! how to repair it .. Discuss here	Aamir_Zia	E-Gold Based Phones	10	09-11-2004 20:06
How to unlock M55 without restpoint and How to repair dead phones.	halcon.cpu	E-Gold Based Phones	10	06-19-2004 14:31
How to lock motorola phone to provider?	bimas	Motorola Old Legacy (EMMI)	3	06-16-2003 23:20
how to repair the phone ???	cliff	Old Ericsson Phones & Sony Phones	0	04-08-2001 16:40

06-13-2008, 14:05	#2 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	ohhhh.......great contribution ....

06-13-2008, 14:38	#3 (permalink)
.:Nadim:. No Life Poster Join Date: Jan 2004 Location: >India > China< Posts: 1,052 Member: 51132 Status: Offline Sonork: 100.1594719 Thanks Meter: 3,722	Realy Great Info Thanks Bro..

06-13-2008, 15:02	#4 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	yes that is real good info good work by gsm munna thx. a lot

06-13-2008, 17:09	#5 (permalink)
calvinpower No Life Poster Join Date: Jul 2002 Location: Tanzania Posts: 1,063 Member: 14229 Status: Offline Thanks Meter: 135	keepit up bro thanks

06-13-2008, 14:50	#6 (permalink)
kishalayabiswas No Life Poster Join Date: Sep 2004 Location: INDIA Posts: 929 Member: 80092 Status: Offline Sonork: 100.1594028 Thanks Meter: 172	very useful information from great supporter

06-13-2008, 18:23	#7 (permalink)
bpcentergtk1 Insane Poster Join Date: Apr 2008 Location: Sikkim/India Posts: 77 Member: 759141 Status: Offline Thanks Meter: 33	yes gsmmunna is a best product supporter in universe

06-16-2008, 09:22	#8 (permalink)
a_upadhyay Junior Member Join Date: May 2004 Age: 53 Posts: 2 Member: 65922 Status: Offline Thanks Meter: 0	Really you r great dear

06-16-2008, 10:21	#9 (permalink)
amralkareem No Life Poster Join Date: Jun 2005 Location: Egypt Age: 41 Posts: 1,659 Member: 153397 Status: Offline Sonork: 113032 Thanks Meter: 372	Realy Great Info Thanks Bro..

06-16-2008, 10:43	#10 (permalink)
OUSKHMANE Freak Poster Join Date: Jul 2006 Location: aghbala Age: 40 Posts: 205 Member: 312667 Status: Offline Sonork: 1000.2 Thanks Meter: 61	very useful information keepit up bro thanks

06-16-2008, 13:49	#11 (permalink)
akshay No Life Poster Join Date: Nov 2002 Location: Everywere Age: 46 Posts: 679 Member: 18057 Status: Offline Thanks Meter: 64	good contribution..... munna...

06-16-2008, 21:53	#12 (permalink)
Goter_Unlock Freak Poster Join Date: Mar 2008 Location: Valledupar-Colombia Age: 34 Posts: 175 Member: 720838 Status: Offline Thanks Meter: 33	thanks..... nice info

06-17-2008, 08:16	#13 (permalink)
vi element Freak Poster Join Date: Dec 2004 Location: South Sumatra, Indonesia Age: 42 Posts: 191 Member: 95561 Status: Offline Sonork: 1573725 Thanks Meter: 31	Love this info... How about error when we in flash operation.. (sorry i forget the code) its kinda... error * *

06-17-2008, 17:07	#14 (permalink)
GsmXplorer No Life Poster Join Date: Oct 2006 Location: INDIA Posts: 1,094 Member: 363308 Status: Offline Thanks Meter: 79	Thats really wonderfull job done by Munna bhai thanx Regards

07-15-2008, 08:43	#15 (permalink)
excelpass Freak Poster Join Date: Dec 2003 Age: 52 Posts: 488 Member: 47532 Status: Offline Thanks Meter: 18	how to do after change flash ic L6? when i press connect it will say unknown flash chip 0000 8988