N95 unlock problem

[adnanskyland]

I tried to unlock but it done with error. Software says check with Upgrade or downgrade. I have ver. 13.0. Does it work with v30.0.015.

[ZoHaiB_(FoneGSM)]

Still have problem mate i have tried as well it's not supported with ver 20 ......... So hope fully next update will Do this

[adnanskyland]

Flashed with 30.0.15 and then Unlocked problem soloved.... Thanks...

[tr3pplea]

JAF box ATmega firmware version: 1B0
Searching for phone ...
ERROR: Cannot detect phone on FBUS interface
Operation time: 00:16.
Done with error(s).
Thread phone exit.

what about the one with above log?

[ronandaly]

Definitely a cable problem

[tr3pplea]

Originally Posted by adnanskyland

Flashed with 30.0.15 and then Unlocked problem soloved.... Thanks...

ASIC ID: 000000010000022600010006400C192101021103
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
bb5king SW v1.07
Sending loader...
RAPIDO_OLD selected.
BB5_FLASH_CMTbootload
UFSx CMT Boot Ready

Error. 0x11110114
Error. UFSx box Write.
Error. cust_tab
Operation time: 01:21.
Done with error(s).
Thread phone exit.

do u advice me to flash this fone with 30.0.15?

[ZoHaiB_(FoneGSM)]

Originally Posted by renegade65

Use BB5king v1.07 and make sure to have stable local/test mode
Also, keep trying if first attempt fails

Originally Posted by ronandaly

Definitely a cable problem

what are You Guys Talking Read This Post as well HERE

http://forum.gsmhosting.com/vbb/show...46&postcount=2

CABLE is OK and ver 1.07 what els You want to say

[ronandaly]

Originally Posted by infozohaib

what are You Guys Talking Read This Post as well HERE

http://forum.gsmhosting.com/vbb/show...46&postcount=2

CABLE is OK and ver 1.07 what els You want to say

I wasn't referring to you so relax. I was referring to Tr3pplea who does have a cable problem.

[chowdary]

Originally Posted by tr3pplea

asic id: 000000010000022600010006400c192101021103
hash: Caeebb65d3c48e6dc73b49dc5063a2ee
rom id: A8c1d6713e691ff8
bb5king sw v1.07
sending loader...
Rapido_old selected.
Bb5_flash_cmtbootload
ufsx cmt boot ready

error. 0x11110114
error. Ufsx box write.
Error. Cust_tab
operation time: 01:21.
Done with error(s).
Thread phone exit.

Do u advice me to flash this fone with 30.0.15?

i m having exactly same problem
i've only managed to unlock 1 out of 10
bb5 king s still full of bugs
br

[Shakeel Communication]

Originally Posted by chowdary

i m having exactly same problem
i've only managed to unlock 1 out of 10
bb5 king s still full of bugs
br

no dude this is not the bbking bugs its a cable problem yesterday i have face the same kind of problrm i have solved this problem.
when between the operation phone have searching,its not going to local mode so thats why we have face that type of error
i have solved this problem with conncet n95 usb cable to usb and phone and disconnect f bus cable to jaf and connect it again with in 3 to4 seconds and disconnect usb cable with usb port and phone,now the phone has easily gone to local mode between the operation searching process.
this trick have work for me yesterday,
and also remember that some time u have to upgrade your version.
this is my experiance with n95 and i have shared here, may be its help some one or not





br,
m s s spk

[adnanskyland]

Originally Posted by tr3pplea

ASIC ID: 000000010000022600010006400C192101021103
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
bb5king SW v1.07
Sending loader...
RAPIDO_OLD selected.
BB5_FLASH_CMTbootload
UFSx CMT Boot Ready

Error. 0x11110114
Error. UFSx box Write.
Error. cust_tab
Operation time: 01:21.
Done with error(s).
Thread phone exit.

do u advice me to flash this fone with 30.0.15?

No You only need to use Jaf as interface.... Ufs can not boot N95 mostly it gives error of cmt certificate mismatch....