| hello!
some phones just dont keep tx/rx in system connector.
some phones use different than mt62xx MCU.
if you are new pinfinder user i would advice to start from phone with known pinout.
so you will be sure that MCU type is set correctly, pinout is present in system connector.
also pay attention to "Finder activation tries " set it to value 10 or more.
remmember that phone must be powered from box power.
absolutely necceserry before searching pinout make sure that phone is able to power On from box power.
for doing this press button "power" red led should indicate that power lines is powered now.
try to power On phone. If it is powering On- you can continue with pinout search.
please ask more if you still have questions |