Dropped 5110 - GSM-Forum

gsmxc · 03-06-2001, 05:48

After I dropped my 5110, the keypads doesnt work. The bottom there buttons (# 0 *) doesnt work and UP doesnt. What are possibly broken inside? Keypad?

MDR · 03-06-2001, 14:22

the membrane is plastic. so, the only thing that would break is the board, one reason why the key/s wouldn't respond

------------------
MDR

aZyWeRks · 03-06-2001, 18:35

Your 5110 is composed of two separate boards, the mainboard and the interface board. The interface board is where you have your keypads, LCD, etc. The only thing that connects the two(boards) is a 28 pin(feet, i don't know what to call them) connector attached to your mainboard. Most likely, you'll have have a few bent, if not broken, "feet".

Hope this might help you.

03-06-2001, 05:48	#1 (permalink)
gsmxc Crazy Poster Join Date: Nov 2000 Location: Sydney, NSW, Australia Posts: 47 Member: 2574 Status: Offline Thanks Meter: 1	Dropped 5110 After I dropped my 5110, the keypads doesnt work. The bottom there buttons (# 0 *) doesnt work and UP doesnt. What are possibly broken inside? Keypad?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
kg195 signol drop when i make call signol drop	shani72	LG Hardware Repair	1	02-10-2009 05:15
8210 ... & ...6210 weak signal problem..call drops...sinal drop	PTR999	Nokia Hardware & Hardware Repair	3	04-17-2002 14:06
5110 drop no signal!!!	eureka8888	Nokia Hardware & Hardware Repair	0	09-16-2001 16:15
How an unknown 5110 became a 5110 5.28 with changed imei :)	Zianna	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	03-13-2001 08:43
Somebody was used 5110-529.fls, 5110-529B.fls files (+)	SashaM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-16-2001 10:06

03-06-2001, 14:22	#2 (permalink)
MDR No Life Poster Join Date: Apr 2000 Location: Philippines Posts: 555 Member: 1272 Status: Offline Thanks Meter: 3	the membrane is plastic. so, the only thing that would break is the board, one reason why the key/s wouldn't respond ------------------ MDR

03-06-2001, 18:35	#3 (permalink)
aZyWeRks Freak Poster Join Date: Jan 2001 Location: I.C., R.P. Posts: 185 Member: 3165 Status: Offline Thanks Meter: 0	Your 5110 is composed of two separate boards, the mainboard and the interface board. The interface board is where you have your keypads, LCD, etc. The only thing that connects the two(boards) is a 28 pin(feet, i don't know what to call them) connector attached to your mainboard. Most likely, you'll have have a few bent, if not broken, "feet". Hope this might help you.