Missing line in display? - GSM-Forum

laxxe · 09-26-2001, 14:42

Hi!

A friend of mine has a missing line is his display. I've seen this on a 8210 before (2 lines), just after a new display was installed.

Is there any way to fix this? What's wrong?

/Lasse

jj008 · 09-26-2001, 16:59

He must have dropped it. It he can see two black lines across the display it is broken screen resistors. If it is a blank line, (no display) you need a pad. I sell them for £5.

laxxe · 09-26-2001, 22:20

It is blank lines (what could it else be?).

On the 3210 it's one blank line, can I fix it? On the 8210 is was first 1 line, after some hours it was 2 blank lines.

trafix · 09-27-2001, 19:12

change the LCD!!

changing the elastomer can sometimes work but seldomly <img src="smile.gif" border="0">

- these lines are usually made when phone is dropped or there is pressure or force is exerted on the lcd display e.g sat down on the phone with a heavy A$$ <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

laxxe · 09-27-2001, 22:34

Well, the lines came when I've just changed the LCD!

They wasn't there right away, after an hour or so, the first line came, an hour after that the other one came...!

/Lasse

trafix · 09-27-2001, 22:59

you might applied a little too much pressure while installing the lcd laxxe...guess you have to replace again...

- 8210 LCD's are very thin and are sensitive to pressure, make sure that you just handle it lightly <img src="smile.gif" border="0">

Best regards!!

09-26-2001, 14:42	#1 (permalink)
laxxe No Life Poster Join Date: Apr 2001 Location: Denmark Age: 34 Posts: 1,700 Member: 4205 Status: Offline Thanks: 0 Thanked 9 Times in 5 Posts	Missing line in display? Hi! A friend of mine has a missing line is his display. I've seen this on a 8210 before (2 lines), just after a new display was installed. Is there any way to fix this? What's wrong? /Lasse

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
2610 stuck & restart with thin line in display	sharaz191	Nokia Hardware & Hardware-Repair Area	10	03-29-2008 08:49
sharp gx 17 lines in display	tajinder	Sharp	0	09-22-2006 14:33
8310 missing lines in lcd	sjakie	Nokia Hardware & Hardware-Repair Area	7	09-13-2004 01:09
3350 line in display	Ayush	Nokia Hardware & Hardware-Repair Area	1	03-30-2003 20:34
Nokia 8210 1 line missing in display	-=KnOeFz=-	Nokia Hardware & Hardware-Repair Area	5	06-23-2002 20:15

09-26-2001, 16:59	#2 (permalink)
jj008 No Life Poster Join Date: Jun 2001 Location: London Age: 30 Posts: 536 Member: 5006 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	He must have dropped it. It he can see two black lines across the display it is broken screen resistors. If it is a blank line, (no display) you need a pad. I sell them for £5.

09-26-2001, 22:20	#3 (permalink)
laxxe No Life Poster Join Date: Apr 2001 Location: Denmark Age: 34 Posts: 1,700 Member: 4205 Status: Offline Thanks: 0 Thanked 9 Times in 5 Posts	It is blank lines (what could it else be?). On the 3210 it's one blank line, can I fix it? On the 8210 is was first 1 line, after some hours it was 2 blank lines.

09-27-2001, 19:12	#4 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 36 Posts: 946 Member: 4873 Status: Offline Thanks: 2 Thanked 5 Times in 4 Posts	change the LCD!! changing the elastomer can sometimes work but seldomly <img src="smile.gif" border="0"> - these lines are usually made when phone is dropped or there is pressure or force is exerted on the lcd display e.g sat down on the phone with a heavy A$$ <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

09-27-2001, 22:34	#5 (permalink)
laxxe No Life Poster Join Date: Apr 2001 Location: Denmark Age: 34 Posts: 1,700 Member: 4205 Status: Offline Thanks: 0 Thanked 9 Times in 5 Posts	Well, the lines came when I've just changed the LCD! They wasn't there right away, after an hour or so, the first line came, an hour after that the other one came...! /Lasse

09-27-2001, 22:59	#6 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 36 Posts: 946 Member: 4873 Status: Offline Thanks: 2 Thanked 5 Times in 4 Posts	you might applied a little too much pressure while installing the lcd laxxe...guess you have to replace again... - 8210 LCD's are very thin and are sensitive to pressure, make sure that you just handle it lightly <img src="smile.gif" border="0"> Best regards!!