Very annoying 8210 problem!!! - GSM-Forum

Kenni · 10-01-2002, 23:51

I've flashed MCU+PPM+EEPROM into the phone, and got CS. The phone was fine before flashing. None of my MBUS-programs can get in contact with the phone. But after a little search on the board, I found out that this was a well known problem, and could be fixed with nk_calc.

But I have never before managed to get nk_calc to work on neither my laptop or my desktop....but after 2 hours of reading and testing I succeded in running the program in pure dos, with the use of DexDebug.

The program is running perfect with all other phones, execpt the 8210. I just receive "Bad connection" all the time, I've tried with 2 other connectors, and 2 MBUS cables....

I've tried with MCU+PPM v5.25-v5.31, and with 4 virgin eeproms (downloaded from different places), but nothing seems to work. And yes, I AM using the correct addresses. However, I was not able to find any full flashes (200-400) on the net, even though I've been going through all links on Schwantz site. So if anyone has a FULL BACKUP (in one file), then I'll be very thankfull....(a or b PPM package is prefered, but I can use other packages also)

I've been using Rolis v4.77 & v.4.78b5 for flashing.

Any sugestions?

Best Regards
--
Kenni
[email protected]

Kenni · 10-02-2002, 00:44

I fixed it, thnx to kovbal, who send me a full backup

However, if anyone have a full backup with a or b PPM package, please contact me! - I need a PPM with danish T9

Best Regards
--
Kenni

10-01-2002, 23:51	#1 (permalink)
Kenni Crazy Poster Join Date: Feb 2002 Location: Denmark Posts: 53 Member: 9603 Status: Offline Thanks Meter: 0	Very annoying 8210 problem!!! I've flashed MCU+PPM+EEPROM into the phone, and got CS. The phone was fine before flashing. None of my MBUS-programs can get in contact with the phone. But after a little search on the board, I found out that this was a well known problem, and could be fixed with nk_calc. But I have never before managed to get nk_calc to work on neither my laptop or my desktop....but after 2 hours of reading and testing I succeded in running the program in pure dos, with the use of DexDebug. The program is running perfect with all other phones, execpt the 8210. I just receive "Bad connection" all the time, I've tried with 2 other connectors, and 2 MBUS cables.... I've tried with MCU+PPM v5.25-v5.31, and with 4 virgin eeproms (downloaded from different places), but nothing seems to work. And yes, I AM using the correct addresses. However, I was not able to find any full flashes (200-400) on the net, even though I've been going through all links on Schwantz site. So if anyone has a FULL BACKUP (in one file), then I'll be very thankfull....(a or b PPM package is prefered, but I can use other packages also) I've been using Rolis v4.77 & v.4.78b5 for flashing. Any sugestions? Best Regards -- Kenni [email protected]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k750i very very strange battery problem	agent003	SonyEricsson (USB-Smart)	0	08-01-2006 02:11
8210 problem. problem and problem	Unggul	Nokia Hardware & Hardware Repair	6	03-28-2005 21:56
very noisy 8210?	olegario	Nokia Hardware & Hardware Repair	9	10-21-2002 21:15
Very Very Very Strange 3310 Problem	mp3hot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	03-24-2002 12:15
VERY DEAD 8210	MR NO NAME	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	10-18-2001 21:27

10-02-2002, 00:44	#2 (permalink)
Kenni Crazy Poster Join Date: Feb 2002 Location: Denmark Posts: 53 Member: 9603 Status: Offline Thanks Meter: 0	I fixed it, thnx to kovbal, who send me a full backup However, if anyone have a full backup with a or b PPM package, please contact me! - I need a PPM with danish T9 Best Regards -- Kenni