GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Nokia > Nokia Hardware & Hardware Repair

Nokia Hardware & Hardware Repair all what you need for Hardware Repairing for Nokia Phones. Before writing any thread here try to check the Frequently Asked Questions Section.

Reply
 
LinkBack Thread Tools Display Modes
Old 02-26-2002, 09:17   #1 (permalink)
No Life Poster
 
doctorvatson's Avatar
 
Join Date: Aug 2001
Location: Russia Moscow
Age: 46
Posts: 567
Member: 5889
Status: Offline
Thanks Meter: 0
Post 3210 switch off


The phone is switching off just after I switch on it. With or without charger there is the same. Battary is ok.<br />Any advice please.<br />(searching in old topics give no result about this problem, only freezing... drop signal...)
  Reply With Quote
Old 02-28-2002, 03:12   #2 (permalink)
Freak Poster
 
Join Date: Aug 2001
Location: Tha Home of DirkDiggler
Posts: 120
Member: 5908
Status: Offline
Thanks Meter: 1
try refresh tha battery connector soldering
try refresh tha soldering L1021.
Check if this happens only with 5V SIM-cards and if the phone works probably with 3V SIMīs
Not OK go to No.12
2. Check X101 and X102 i poor soldered, bent or soiled / bottom
3. Check amplitude of 32,768 kHz square wave at C149 (OK go to No. 9) / bottom
4. Change or check soldering of B100 / bottom
5. Change or check soldering of C147 / bottom
6. Change or check soldering of C148 / bottom
7. Change or check soldering of C153 / bottom
8. Change or check soldering of N100 / bottom
9. Check amplitude of 13 Mhz, RF Clk C301, 2,8Vpp (Not OK change G701, V702) / top
10. Check VBB 2,8V DC on C117 / bottom
11. Change or check soldering of N100, C117
12. Check the 5V supply voltage on C136 with an oscilloscope / top
13. Change C136 if the noise is higher than 350mVpp / bottom

regards
****opig
  Reply With Quote
Old 02-28-2002, 05:49   #3 (permalink)
No Life Poster
 
doctorvatson's Avatar
 
Join Date: Aug 2001
Location: Russia Moscow
Age: 46
Posts: 567
Member: 5889
Status: Offline
Thanks Meter: 0
Thank You for quit full answer.
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Sendo M550 switch on but won't switch off GSM SNIPER Various 4 06-23-2004 16:46
3310 after switching off, will only switch back on if you remove and replace battery bilbo Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 0 11-12-2003 00:41
T65 switch on ... switch off ... switch on ... switch ....... MiSi3k Sony Ericsson 8 08-17-2003 00:45
3210 Switchs on then straight back off (Just flashes then goes off) Rebels Advocate Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 5 04-08-2003 19:00
3210 switch off doctorvatson Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 0 02-26-2002 08:58

 



All times are GMT +1. The time now is 22:20.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.17051 seconds with 9 queries

SEO by vBSEO