SagemDD JTAG clone problem - GSM-Forum

Bakl · 11-13-2005, 07:45

I tested SCDR1 clone to SagemDD JTAG clone.
Original crystal 3.68 Mhz to 3.8 Mhz not changed.
Reading phone info after allways error: Bootloader failed !

egg:

MyC-3
PROBLEM: Bootloader failed!
Phone Code: 00000000
Phone Info: 110594382670 KI3,LF: 190405 1538 (HT22 00 00)

MyV-55
PROBLEM: Bootloader failed!
Phone Code: 00000000
Phone Info: 831451060792 KB3,ME: 280904 1607 (HT22 00 00)

MyX 5-2
PROBLEM: Bootloader failed!
Phone Code: 06071969
Phone Info: 348102128956 KB3,MM: 220904 1818 (HT22 00 00)

Myx-4
PROBLEM: Bootloader failed!
Phone Code: 0000
Phone Info: 202251346718 KB3,NO: 220705 1251 (HTC4 21 01)

What this problem ?

Bakl

DMD · 11-13-2005, 09:46

Hi Normally Bootloader failed can be from bad test point connection or test point jig/cable

Regards D.

zinoubinabil · 11-13-2005, 09:49

Quote:

Originally Posted by Bakl

I tested SCDR1 clone to SagemDD JTAG clone.
Original crystal 3.68 Mhz to 3.8 Mhz not changed.
Reading phone info after allways error: Bootloader failed !
egg:
MyC-3
PROBLEM: Bootloader failed!
Phone Code: 00000000
Phone Info: 110594382670 KI3,LF: 190405 1538 (HT22 00 00)
MyV-55
PROBLEM: Bootloader failed!
Phone Code: 00000000
Phone Info: 831451060792 KB3,ME: 280904 1607 (HT22 00 00)
MyX 5-2
PROBLEM: Bootloader failed!
Phone Code: 06071969
Phone Info: 348102128956 KB3,MM: 220904 1818 (HT22 00 00)
Myx-4
PROBLEM: Bootloader failed!
Phone Code: 0000
Phone Info: 202251346718 KB3,NO: 220705 1251 (HTC4 21 01)
What this problem ?
Bakl

you've make it in manual speed 1900 & it will be done

AMINOS · 11-13-2005, 10:04

Quote:

Originally Posted by zinoubinabil

you've make it in manual speed 1900 & it will be done

it's proble in your cable

zinoubinabil · 11-13-2005, 11:21

Quote:

Originally Posted by THE LION

it's proble in your cable

if it a cable problem he can't read the phone info

Bakl · 11-13-2005, 12:58

1. Manual speed setting on phone 19200.
2. SagemDD JTAG program setting on manual speed 19200.
3. Do Job! -> PROBLEM: Failed to read IMEI!

4. SagemDD JTAG program setting off manual speed 19200.

5. Do Job! -> PROBLEM: Bootloader failed!
IMEI: 35104942195643-6;
Phone Info: 425401673113 JC3,8G: 130103 1443; HT (22 00 00);
Phone Code: 00000000

Some problem ! Other ?

Bakl

crusher · 11-13-2005, 13:03

....................

stargsm_ro · 11-13-2005, 13:03

Change cristal !!! to 3.8 Mhz

Kashif Khan · 11-13-2005, 13:51

unplugged supply usb, and check your proper connection of USB.if everything is ok with your colone sagem DD so it mean you have very cheap jigs, you can directly sold wires on your mobile,s board.
BR
Kashif Khan

kb501x · 11-13-2005, 14:44

Hi All

So does the dongle work with 3.68Mhz or not??????

Kello

**.:hack3r2k:.** · 11-13-2005, 15:31

RELEASED SERVER IS ****. WAS MADE ONLY TO CREATE BAD ADVERTISE. IN FACT CONVERT SCR1 TO A NON WORKING THING

Br

Ionel · 11-13-2005, 15:38

If u want to work u must change cristal to 3,8 mhz .
It is normaly that is not working with 3,6

Lukago · 11-13-2005, 16:05

Quote:

Originally Posted by Ionel

If u want to work u must change cristal to 3,8 mhz .
It is normaly that is not working with 3,6

for me it works with original cristal - 3,6MHz, for example - z-55 with result:

[11/11/05 20:28:15] Phone Info: 168518234076 LB,20E: 160605 1858; HT (01 00 01); Phone Code: 0000
[11/11/05 20:28:19] IMEI: 35587300820xxx-1; Code: 18107912-91;

BR, Lukago

Ionel · 11-13-2005, 16:13

I don't try it , only on a sagem mx1 and is the same problem , i think u must change cristal i don't hawe one , but all is ok cables connections, only cristal is 3,6 mhz to me , and i must change it to see if works .

PremierGSM · 11-13-2005, 16:28

Solve all your problems and buy an ORIGINAL Device

11-13-2005, 07:45	#1 (permalink)
Bakl Freak Poster Join Date: Apr 2002 Location: Hungary,Deb Age: 58 Posts: 211 Member: 10826 Status: Offline Thanks Meter: 19	SagemDD JTAG clone problem I tested SCDR1 clone to SagemDD JTAG clone. Original crystal 3.68 Mhz to 3.8 Mhz not changed. Reading phone info after allways error: Bootloader failed ! egg: MyC-3 PROBLEM: Bootloader failed! Phone Code: 00000000 Phone Info: 110594382670 KI3,LF: 190405 1538 (HT22 00 00) MyV-55 PROBLEM: Bootloader failed! Phone Code: 00000000 Phone Info: 831451060792 KB3,ME: 280904 1607 (HT22 00 00) MyX 5-2 PROBLEM: Bootloader failed! Phone Code: 06071969 Phone Info: 348102128956 KB3,MM: 220904 1818 (HT22 00 00) Myx-4 PROBLEM: Bootloader failed! Phone Code: 0000 Phone Info: 202251346718 KB3,NO: 220705 1251 (HTC4 21 01) What this problem ? Bakl

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SagemDD/JTAG Clone	Inovator	Wanted Products	0	01-15-2006 13:52
Upgrade JTAG clone to JTAG original - idea...	kades	SAGEM JTAG UNLOCKER	12	12-15-2005 12:22
Jaf cloned + support, x-nemesis v2, sagemDD jtag, scdr2 v10 etc.	Secgsm	Main Sales Section	0	10-28-2005 02:26
Upgrade SCDR I to SagemDD/JTAG Clone?	thagangsta	ARM9 BASED M62 / M62+	10	10-27-2005 23:50
samsung e530 clip, sagemDD jtag, martech box 2 plus and more...	Secgsm	Main Sales Section	0	09-14-2005 16:26

11-13-2005, 09:46	#2 (permalink)
DMD No Life Poster Join Date: Jun 2002 Location: CTSA Age: 46 Posts: 2,194 Member: 12660 Status: Offline Thanks Meter: 7	Hi Normally Bootloader failed can be from bad test point connection or test point jig/cable Regards D.

11-13-2005, 12:58	#6 (permalink)
Bakl Freak Poster Join Date: Apr 2002 Location: Hungary,Deb Age: 58 Posts: 211 Member: 10826 Status: Offline Thanks Meter: 19	1. Manual speed setting on phone 19200. 2. SagemDD JTAG program setting on manual speed 19200. 3. Do Job! -> PROBLEM: Failed to read IMEI! 4. SagemDD JTAG program setting off manual speed 19200. 5. Do Job! -> PROBLEM: Bootloader failed! IMEI: 35104942195643-6; Phone Info: 425401673113 JC3,8G: 130103 1443; HT (22 00 00); Phone Code: 00000000 Some problem ! Other ? Bakl

11-13-2005, 13:03	#7 (permalink)
crusher No Life Poster Join Date: Dec 2001 Location: [winscard.SCardTransmit] Posts: 1,835 Member: 8023 Status: Offline Thanks Meter: 13	....................

11-13-2005, 13:03	#8 (permalink)
stargsm_ro No Life Poster Join Date: Nov 2003 Location: Romania/Craiova Age: 44 Posts: 752 Member: 44085 Status: Offline Thanks Meter: 123	Change cristal !!! to 3.8 Mhz

11-13-2005, 13:51	#9 (permalink)
Kashif Khan No Life Poster Join Date: Oct 2004 Location: Holland China Brazil Age: 43 Posts: 3,815 Member: 88016 Status: Offline Thanks Meter: 320	unplugged supply usb, and check your proper connection of USB.if everything is ok with your colone sagem DD so it mean you have very cheap jigs, you can directly sold wires on your mobile,s board. BR Kashif Khan

11-13-2005, 14:44	#10 (permalink)
kb501x Freak Poster Join Date: Feb 2004 Age: 63 Posts: 213 Member: 52276 Status: Offline Thanks Meter: 0	Hi All So does the dongle work with 3.68Mhz or not?????? Kello

11-13-2005, 15:31	#11 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,568	RELEASED SERVER IS ****. WAS MADE ONLY TO CREATE BAD ADVERTISE. IN FACT CONVERT SCR1 TO A NON WORKING THING Br

11-13-2005, 15:38	#12 (permalink)
Ionel No Life Poster Join Date: Sep 2004 Location: Romania Age: 42 Posts: 1,598 Member: 81232 Status: Offline Thanks Meter: 196	If u want to work u must change cristal to 3,8 mhz . It is normaly that is not working with 3,6

11-13-2005, 16:13	#14 (permalink)
Ionel No Life Poster Join Date: Sep 2004 Location: Romania Age: 42 Posts: 1,598 Member: 81232 Status: Offline Thanks Meter: 196	I don't try it , only on a sagem mx1 and is the same problem , i think u must change cristal i don't hawe one , but all is ok cables connections, only cristal is 3,6 mhz to me , and i must change it to see if works .

11-13-2005, 16:28	#15 (permalink)
PremierGSM No Life Poster Join Date: Jun 2002 Location: England Posts: 887 Member: 13335 Status: Offline Thanks Meter: 2	Solve all your problems and buy an ORIGINAL Device