Ericsson 10 power off - GSM-Forum

Mike727 · 10-01-2002, 23:22

Ericsson T10 power off when find network or make call.
Ii's not PA (AND630), i change iy many times

((
Not Power IC...
????

themobileking · 10-02-2002, 13:20

battery???

Mike727 · 10-02-2002, 22:12

i'am not stupid

gafyd45 · 10-12-2002, 20:41

Dear You.....
I need help with my T10s dead phone, I had been try
with much ericsson software the software can detect my phone
ID like version,imei,etc but the phone cant power on please help me.
for help and solutions thank you somuch.
best regards,

gafyd45

jero · 10-14-2002, 17:24

hi all..just reball the DSP or if it is not BGA rehot it by pressing with tweezers on it..mostly it works..__jero__

Pandemonio100 · 10-14-2002, 17:46

For Mike727 have you tried to upload eeprom whit one good and flash phone?

andie · 10-14-2002, 21:32

for mike727

check the antenna connector, there are two contacts and they should not touch each other

because when is shorted to ground it will take lots amount of power for tx/rx

hope this help

izroda · 12-22-2002, 16:31

check the battery

StudioGSM · 12-22-2002, 20:41

Yes, check the battery. Clear precisely battery connections.

pathan · 12-22-2002, 21:20

mate you need to do hardware mod,where the batt pads are on the pcb yu need to solder 3 pads

common fault

10-01-2002, 23:22	#1 (permalink)
Mike727 Junior Member Join Date: Jan 2002 Location: Russia Posts: 12 Member: 8909 Status: Offline Thanks Meter: 0	Ericsson 10 power off Ericsson T10 power off when find network or make call. Ii's not PA (AND630), i change iy many times (( Not Power IC... ????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sony Ericsson T610 Power-Off	kofi20	Sony Ericsson Hardware Repair	0	10-13-2006 17:38
Ericsson 2628 power off When Call	Raklm	Sony Ericsson Hardware Repair	2	01-06-2003 16:18
Ericsson 2628 power off an on periodicaly	Raklm	Sony Ericsson Hardware Repair	5	12-30-2002 10:23
Ericsson T18 Power Off When Calling 112	ARC	Sony Ericsson Hardware Repair	2	12-01-2002 07:43
Ericsson a1018s powers off	SVH	Sony Ericsson Hardware Repair	2	11-21-2002 22:26

10-02-2002, 13:20	#2 (permalink)
themobileking No Life Poster Join Date: Jun 2001 Location: Uranus Age: 53 Posts: 731 Member: 5072 Status: Offline Thanks Meter: 91	battery???

10-02-2002, 22:12	#3 (permalink)
Mike727 Junior Member Join Date: Jan 2002 Location: Russia Posts: 12 Member: 8909 Status: Offline Thanks Meter: 0	i'am not stupid

10-12-2002, 20:41	#4 (permalink)
gafyd45 Banned Join Date: Oct 2002 Location: Jl.Mawar merah 5 Blok D30 No.15 Bekasi Indonesia Age: 46 Posts: 44 Member: 16434 Status: Offline Thanks Meter: 0	Dear You..... I need help with my T10s dead phone, I had been try with much ericsson software the software can detect my phone ID like version,imei,etc but the phone cant power on please help me. for help and solutions thank you somuch. best regards, gafyd45

10-14-2002, 17:24	#5 (permalink)
jero Freak Poster Join Date: Aug 2002 Location: __inside__ Age: 41 Posts: 102 Member: 14792 Status: Offline Thanks Meter: 1	hi all..just reball the DSP or if it is not BGA rehot it by pressing with tweezers on it..mostly it works..__jero__

10-14-2002, 17:46	#6 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	For Mike727 have you tried to upload eeprom whit one good and flash phone?

10-14-2002, 21:32	#7 (permalink)
andie Junior Member Join Date: Oct 2002 Posts: 31 Member: 16495 Status: Offline Thanks Meter: 0	for mike727 check the antenna connector, there are two contacts and they should not touch each other because when is shorted to ground it will take lots amount of power for tx/rx hope this help

12-22-2002, 16:31	#8 (permalink)
izroda Junior Member Join Date: Sep 2002 Age: 60 Posts: 7 Member: 15876 Status: Offline Thanks Meter: 0	check the battery

12-22-2002, 20:41	#9 (permalink)
StudioGSM Freak Poster Join Date: Aug 2002 Location: Poland Age: 44 Posts: 303 Member: 15122 Status: Offline Thanks Meter: 18	Yes, check the battery. Clear precisely battery connections.

12-22-2002, 21:20	#10 (permalink)
pathan Crazy Poster Join Date: Sep 2001 Location: uk Posts: 53 Member: 6467 Status: Offline Thanks Meter: 0	mate you need to do hardware mod,where the batt pads are on the pcb yu need to solder 3 pads common fault