L7 Giving Error in Flahsing Process ????? - GSM-Forum

lahoot · 06-01-2007, 16:49

L7 only shows kepad light when press Pwr Button

when i try to Flash Giving Following Error

switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... 0x90 - 0x0090, chip unidentified
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v,K1
Hardware IMEI: 640FBEFA7E0D675
Error: "Repair PDS" unavailable due to incomplete chip identification

I tried PDS Reapir but Giving same Error

Plz Help

lahoot · 06-02-2007, 07:03

Not Anyone Knows About It?

makkah mobile · 06-02-2007, 07:57

what version u have 08.d0 or 0a.20 ?? and how u doing flash?

lahoot · 06-02-2007, 08:54

Nom I dont Have 0.8.d0 or Da20

i flash it wid 08.B7

Maked test point, conect phone, Select File and write Flashing

makkah mobile · 06-02-2007, 09:25

i think u dammage somthin when u was remooving the shield .. check its hardware

LHOT · 06-02-2007, 09:33

check may be hardware problem!!

GSM_Support · 06-02-2007, 10:09

Flash memory chip can't be read. There are two main reasons for that:

The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair. Connection between the chip and the PCB may be improved by the hot air.
TestPoint procedure was not performed properly - just to make sure please, repeat the TP procedure.

Best Regards
GSMServer team

lahoot · 06-02-2007, 13:25

Quote:

Originally Posted by GSM_Support

Flash memory chip can't be read. There are two main reasons for that:

The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair. Connection between the chip and the PCB may be improved by the hot air.
TestPoint procedure was not performed properly - just to make sure please, repeat the TP procedure.

Best Regards
GSMServer team

I will tell u Result later after try to ur Sullotion
Thanks a lot

adrianw23 · 06-12-2007, 13:56

I have this same problem, anyone solve it? I try unlock L7 , prepare phone and now it's dead

Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... 0x90 - 0x0090, chip unidentified
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v,K1
Hardware IMEI: A8079EFAAD7D6F6
Error: "Repair PDS" unavailable due to incomplete chip identification

Mr.Tinkertrain · 06-12-2007, 14:01

@ adrianw23,

Reading flash id... 0x90 - 0x0090, chip unidentified, this error from log file shows that flash chip can not be read properly. there are two main reasons for such error:
1. The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair.
Connection between the chip and the PCB may be improved by the hot air.
2. Testpoint procedure was not performed properly -- just to make sure please, repeat the tp procedure.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Jr Telecom · 06-12-2007, 14:10

U can try by IQ box or Ultima
________________________
Put ....Blank mode/Erase flash
.........Rebuiled pds
Then Full flash ur phone.

adrianw23 · 06-12-2007, 14:11

Before unlock, telephone power on averything OK , it's strange

06-01-2007, 16:49	#1 (permalink)
lahoot No Life Poster Join Date: Feb 2006 Location: In Heavan Posts: 1,056 Member: 229987 Status: Offline Sonork: 100.1602834 Thanks Meter: 193	L7 Giving Error in Flahsing Process ????? L7 only shows kepad light when press Pwr Button when i try to Flash Giving Following Error switching to flash mode... OK Reading phone boot version... 3.00 Reading flash id... 0x90 - 0x0090, chip unidentified Phone group: V235,V360,V360v,V3i,V3r,L7,L7v,K1 Hardware IMEI: 640FBEFA7E0D675 Error: "Repair PDS" unavailable due to incomplete chip identification I tried PDS Reapir but Giving same Error Plz Help

06-02-2007, 10:09	#7 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,981 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Flash memory chip can't be read. There are two main reasons for that: The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair. Connection between the chip and the PCB may be improved by the hot air. TestPoint procedure was not performed properly - just to make sure please, repeat the TP procedure. Best Regards GSMServer team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Error in unlock process of samsung T459 [SOLVED]	julio05	PolarBox 3	11	03-26-2010 04:18
Error in the process of updating HWK 2.0.8.0	Diviclaro	HWK	2	10-14-2008 13:39
L7 Giving Error in Flahsing Process	lahoot	Motorola Hardware Repair	3	06-02-2007 05:32
Nokia 2610, ASIC11 - error in unlocking process!!!	claudio_gsm	Universalbox	4	11-22-2006 18:11
Nokia 3650 giving error in startup "w-serv application error"	kingofhearts	Nokia Digital Core Technology 4 ( DCT-4 )	8	07-27-2003 18:14

06-02-2007, 07:03	#2 (permalink)
lahoot No Life Poster Join Date: Feb 2006 Location: In Heavan Posts: 1,056 Member: 229987 Status: Offline Sonork: 100.1602834 Thanks Meter: 193	Not Anyone Knows About It?

06-02-2007, 07:57	#3 (permalink)
makkah mobile No Life Poster Join Date: Jan 2006 Location: THE GREAT :::LOVELY:::PAKISTAN Posts: 1,425 Member: 226363 Status: Offline Sonork: 03--4899925 Thanks Meter: 569	what version u have 08.d0 or 0a.20 ?? and how u doing flash?

06-02-2007, 08:54	#4 (permalink)
lahoot No Life Poster Join Date: Feb 2006 Location: In Heavan Posts: 1,056 Member: 229987 Status: Offline Sonork: 100.1602834 Thanks Meter: 193	Nom I dont Have 0.8.d0 or Da20 i flash it wid 08.B7 Maked test point, conect phone, Select File and write Flashing

06-02-2007, 09:25	#5 (permalink)
makkah mobile No Life Poster Join Date: Jan 2006 Location: THE GREAT :::LOVELY:::PAKISTAN Posts: 1,425 Member: 226363 Status: Offline Sonork: 03--4899925 Thanks Meter: 569	i think u dammage somthin when u was remooving the shield .. check its hardware

06-02-2007, 09:33	#6 (permalink)
LHOT Freak Poster Join Date: Sep 2004 Age: 44 Posts: 212 Member: 81216 Status: Offline Thanks Meter: 11	check may be hardware problem!!

06-12-2007, 13:56	#9 (permalink)
adrianw23 Freak Poster Join Date: Oct 2005 Location: Poland Posts: 266 Member: 189499 Status: Offline Thanks Meter: 16	I have this same problem, anyone solve it? I try unlock L7 , prepare phone and now it's dead Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.00 Reading flash id... 0x90 - 0x0090, chip unidentified Phone group: V235,V360,V360v,V3i,V3r,L7,L7v,K1 Hardware IMEI: A8079EFAAD7D6F6 Error: "Repair PDS" unavailable due to incomplete chip identification

06-12-2007, 14:01	#10 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ adrianw23, Reading flash id... 0x90 - 0x0090, chip unidentified, this error from log file shows that flash chip can not be read properly. there are two main reasons for such error: 1. The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair. Connection between the chip and the PCB may be improved by the hot air. 2. Testpoint procedure was not performed properly -- just to make sure please, repeat the tp procedure. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

06-12-2007, 14:10	#11 (permalink)
Jr Telecom No Life Poster Join Date: Dec 2006 Location: Jr Telecom™ Posts: 1,735 Member: 409725 Status: Offline Sonork: 100.1581478 Thanks Meter: 797	U can try by IQ box or Ultima ________________________ Put ....Blank mode/Erase flash .........Rebuiled pds Then Full flash ur phone.

06-12-2007, 14:11	#12 (permalink)
adrianw23 Freak Poster Join Date: Oct 2005 Location: Poland Posts: 266 Member: 189499 Status: Offline Thanks Meter: 16	Before unlock, telephone power on averything OK , it's strange