GSM-Forum - View Single Post - L7 Giving Error in Flahsing Process ?????

GSM_Support · 06-02-2007, 10:09

Flash memory chip can't be read. There are two main reasons for that:

The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair. Connection between the chip and the PCB may be improved by the hot air.
TestPoint procedure was not performed properly - just to make sure please, repeat the TP procedure.

Best Regards
GSMServer team

06-02-2007, 10:09	#7 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,982 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,767	Flash memory chip can't be read. There are two main reasons for that: The flash memory chip is damaged or doesn't communicate with the processor. In this case the phone needs hardware repair. Connection between the chip and the PCB may be improved by the hot air. TestPoint procedure was not performed properly - just to make sure please, repeat the TP procedure. Best Regards GSMServer team