GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 08-18-2009, 08:53   #1 (permalink)
No Life Poster
 
shahzaadbutt's Avatar
 
Join Date: Mar 2005
Location: Pakistan
Posts: 6,101
Member: 123458
Status: Offline
Sonork: 100.1594535
Thanks Meter: 3,421
Question ZTE X761 Dead After Flash


COM84 [VCP1] selected
module v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA101_En_Es_Pt_Vodafone-Indie.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC 292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN_4A6AE6A7].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN
ver. sw 2: X761_Z0_S_A07A105, 581995B5
ffs offset/size: 00D00000/00300000
ffs address assigned: 00D00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
firmware patch sp-lock #0/0 applied
firmware patch sp-lock #1 is not required
firmware patch sp-lock #2 is not required
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090818-124056.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
ffs formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090818-124956.B0X.bin
Finished, time used: 563 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
  Reply With Quote
The Following 2 Users Say Thank You to shahzaadbutt For This Useful Post:
Old 08-18-2009, 09:30   #2 (permalink)
No Life Poster
 
shahzaadbutt's Avatar
 
Join Date: Mar 2005
Location: Pakistan
Posts: 6,101
Member: 123458
Status: Offline
Sonork: 100.1594535
Thanks Meter: 3,421
i flash again with firmware + eeprom now hang on white screen


Code:
COM84 [VCP1] selected
module  v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z0_S_A07A105_En_Es.B0M.bin
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA105__ffs_20090817-142941.B0E.bin
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103.BIN_FDF041C9].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103.BIN
ver. sw 2: X761_Z2_SF_BFFA103, 36BE0F02
ffs offset/size: 00E00000/00200000
ffs address assigned: 00E00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103__system_log_EFDEC292_FDF041C9_20090818-131409.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
Area: Eeprom/ffs
flash: 98000300000001:18E59F00000000
Write: Eeprom/ffs
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103__system_log_EFDEC292_FDF041C9_20090818-132422.B0X.bin
Finished, time used: 639 sec
Remove/Install battery now !
  Reply With Quote
The Following 2 Users Say Thank You to shahzaadbutt For This Useful Post:
Old 08-18-2009, 20:21   #3 (permalink)
No Life Poster
 
jepetu's Avatar
 
Join Date: Sep 2005
Location: Havana, CUBA
Posts: 2,259
Member: 181633
Status: Offline
Thanks Meter: 727
Donate money to this user
Quote:
Originally Posted by shahzaadbutt View Post
i flash again with firmware + eeprom now hang on white screen
Your original phone firmware was BFFA105 (as per your backup says) so.. flash your phone with 'ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103_En_Fr_Es_Vodafone-Indie.B0M.bin' this is the more recent firmware in support maybe it can revive your X761, remember select "Format FFS" when flashing.

If your phone doesn't start only solution is to ask Infinity supporters to prepare flash from your backup that is newest.

Hope this can help.
  Reply With Quote
Old 08-18-2009, 20:22   #4 (permalink)
Product Manager
 
Join Date: Mar 2005
Location: infinity-box
Posts: 38,635
Member: 130995
Status: Offline
Thanks Meter: 35,229
Hello,

1. make "format ffs" in "complete" mode.
2. try to flash phone with other firmware from support area
  Reply With Quote
Old 08-19-2009, 08:37   #5 (permalink)
No Life Poster
 
shahzaadbutt's Avatar
 
Join Date: Mar 2005
Location: Pakistan
Posts: 6,101
Member: 123458
Status: Offline
Sonork: 100.1594535
Thanks Meter: 3,421
Quote:
Originally Posted by InfinitySupport View Post
Hello,

1. make "format ffs" in "complete" mode.
2. try to flash phone with other firmware from support area
i already complete format and flash all firmwares from support area but no success



plz can u tell me i have read its full flash how can i flash with that readed file?
  Reply With Quote
The Following User Says Thank You to shahzaadbutt For This Useful Post:
Old 08-19-2009, 08:46   #6 (permalink)
No Life Poster
 
Faisal_Computer's Avatar
 
Join Date: Jun 2005
Location: Kamalia, Pakistan.
Age: 38
Posts: 16,852
Member: 151871
Status: Offline
Thanks Meter: 71,425
Quote:
Originally Posted by shahzaadbutt View Post
i already complete format and flash all firmwares from support area but no success



plz can u tell me i have read its full flash how can i flash with that readed file?

Send that flash file to infinity they will convert and upload to support then you can do flash !!

just upload on Rapidshare or any other file hosting server and post link after some time you will able to get file from support and flash it !!

BR

Faisal_Computer
  Reply With Quote
Old 08-19-2009, 08:59   #7 (permalink)
No Life Poster
 
shahzaadbutt's Avatar
 
Join Date: Mar 2005
Location: Pakistan
Posts: 6,101
Member: 123458
Status: Offline
Sonork: 100.1594535
Thanks Meter: 3,421
here is readed full flash before any operation when phone was locked and 100% ok
http://rapidshare.com/files/26840160...17-142532.html


plz infinity team convert and upload it on support area please


thanx
  Reply With Quote
The Following User Says Thank You to shahzaadbutt For This Useful Post:
Old 08-19-2009, 08:59   #8 (permalink)
No Life Poster
 
shahzaadbutt's Avatar
 
Join Date: Mar 2005
Location: Pakistan
Posts: 6,101
Member: 123458
Status: Offline
Sonork: 100.1594535
Thanks Meter: 3,421
i have flash with this file but phone still dead
COM84 [VCP2] selected
module v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA103_En_Fr_Es_Vodafone-Indie.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC 292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN_4A6AE6A7].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN
ver. sw 2: X761_Z0_S_A07A105, 581995B5
ffs offset/size: 00D00000/00300000
ffs address assigned: 00D00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
firmware patch sp-lock #0/0 is not required
firmware patch sp-lock #1 is not required
firmware patch sp-lock #2 is not required
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-124711.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
ffs formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-125613.B0X.bin
Finished, time used: 569 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !



the phone have originally this firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_ BFFA105
  Reply With Quote
The Following User Says Thank You to shahzaadbutt For This Useful Post:
Old 08-19-2009, 10:57   #9 (permalink)
No Life Poster
 
shahzaadbutt's Avatar
 
Join Date: Mar 2005
Location: Pakistan
Posts: 6,101
Member: 123458
Status: Offline
Sonork: 100.1594535
Thanks Meter: 3,421
successfully revived with my backup readed full flash, thanx to infinity team


COM84 [VCP1] selected
module v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA105_En_Fr_Es.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC 292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN_4A6AE6A7].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN
ver. sw 2: X761_Z0_S_A07A105, 581995B5
ffs offset/size: 00D00000/00300000
ffs address assigned: 00D00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
warning: rpl file not found: C:\Program Files\InfinityBox\MModule\id.EFDEC292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA1 05.BIN_0C16B03A].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\MModule\id.EFDEC292._ZTEMT25_07A _PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA105.BIN_0C16 B03A_.rpl
startup code area #1 backup loaded
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-144145.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-145024.B0X.bin
Finished, time used: 545 sec
Remove/Install battery now !
  Reply With Quote
The Following User Says Thank You to shahzaadbutt For This Useful Post:
Old 08-19-2009, 16:20   #10 (permalink)
Freak Poster
 
Join Date: Jul 2005
Posts: 361
Member: 158999
Status: Offline
Thanks Meter: 41
Quote:
Originally Posted by Faisal_Computer View Post
Send that flash file to infinity they will convert and upload to support then you can do flash !!

just upload on Rapidshare or any other file hosting server and post link after some time you will able to get file from support and flash it !!

BR

Faisal_Computer
friend ilist solution for x761 vodafone dead?
  Reply With Quote
Old 08-19-2009, 16:26   #11 (permalink)
No Life Poster
 
Faisal_Computer's Avatar
 
Join Date: Jun 2005
Location: Kamalia, Pakistan.
Age: 38
Posts: 16,852
Member: 151871
Status: Offline
Thanks Meter: 71,425
sorry did not understand !! and if you want to ask any qua , then make a new thread will answer you , and please do not mix the topic
BR
Faisal_Computer
  Reply With Quote
Old 08-19-2009, 16:34   #12 (permalink)
Freak Poster
 
Join Date: Jul 2005
Posts: 361
Member: 158999
Status: Offline
Thanks Meter: 41
Quote:
Originally Posted by Faisal_Computer View Post
sorry did not understand !! and if you want to ask any qua , then make a new thread will answer you , and please do not mix the topic
BR
Faisal_Computer
ok your said waths solution for one x761 vodafone dead??
  Reply With Quote
Old 08-19-2009, 17:52   #13 (permalink)
Freak Poster
 
INGSOFT-GSM's Avatar
 
Join Date: Jul 2009
Location: Ciudad Luz
Posts: 319
Member: 1075477
Status: Offline
Sonork: 1622970
Thanks Meter: 33
I have 5 phones killed by the bug again q infinity is not a flash in the post FLAS support to repair these phones
  Reply With Quote
Old 08-22-2009, 19:53   #14 (permalink)
Freak Poster
 
celcomputo2007's Avatar
 
Join Date: Aug 2007
Posts: 162
Member: 576154
Status: Offline
Thanks Meter: 23
flashing and turned on but now I get signal .... thank collaboration
  Reply With Quote
Old 09-13-2009, 20:33   #15 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 13
Member: 807596
Status: Offline
Thanks Meter: 0
I have one that I stay the same after flashing.

that procedure is effective !!!!!!!!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
zte 335 dead after flash sneha Various CDMA/TDMA Cell Phones 12 12-25-2010 15:39
Zte x761 dead after repair securite zone ORACHI Infinity-Box 1 01-01-2010 18:08
zte x761 dead :::ANSWERED::: MovilCare PolarBox 3 4 06-16-2009 14:22
Zte 336 dead after flashing loverajgoyal Various CDMA/TDMA Cell Phones 0 04-23-2009 08:50
Zte 125 dead after flash luyanda Infinity-Box 2 01-09-2009 15:31

 



All times are GMT +1. The time now is 12:35.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.26208 seconds with 9 queries

SEO by vBSEO