5220 superdongle area damaged-so charger not supported -help - GSM-Forum

zone3 · 01-30-2010, 06:10

i have a 5220 contact service-info as below

MCU SW version: V 07.23
17-07-09
RM-411
(c) Nokia
PCI version:
RFIC version: 064c0601
DSP version:
ICPR72_09w17
LCD version: SHARP
PPM version: V 07.23
17-07-09
RM-411
(c) Nokia
A
BT MCM version: 2222-143C
Retu version: 15
Tahvo version: 22
Content Pack version: Content: a_a_green
V 07.23
17-07-09
RM-411
(c) Nokia
Production serial number: 0
Product code:
Module code:
Basic production code:
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 353662018670372
IMEI spare to net: 3A 35 66 02 81 76 30 07
IMEI SV to net: 33 35 66 02 81 76 30 47 F0
LOCK STATUS:
CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0

i repair sp area using cyclone using credits-now contact service ok-but when charger connect ""CHARGER NOT SUPPORTED""-so tried sx4-but error-so i know super dongle damaged.

how repair it?

Maiwand khan · 01-30-2010, 06:41

SD repaire not possible with cyclone yet.
wait for update or use another tools to repair SD but u will need credits for it.

.::kabir::. · 01-30-2010, 06:45

you can try with mx-key

zonetrichur · 01-30-2010, 07:43

Quote:

Originally Posted by Maiwand khan

SD repaire not possible with cyclone yet.
wait for update or use another tools to repair SD but u will need credits for it.

can i possible with mtbox logs?

zonetrichur · 01-30-2010, 07:44

Quote:

Originally Posted by .::kabir::.

you can try with mx-key

i think mx key can not repair sd

rontekgsm · 01-30-2010, 07:50

To make sure if SD is damage

Power phone on and standby for at least 3 minutes

If phone shuts down in 3 minutes it means superdongle is invalid

That is why SD damage is watchdog timer enabled and shuts down in 3 minutes

Also if phone not shuts down in 3 minutes solution is write pm with sx4 auth

Charging calibration is also located in phones PM file

professor linux · 01-30-2010, 07:58

Quote:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider

just fix first................

soshan · 01-30-2010, 08:14

sd repair availble by othere tools
i hope very soon release new update by best supporter(alex).

asad_nomy7 · 01-30-2010, 09:53

Just Write full modified PM to to your 5220 With SX4 authentication.i do it many time by MT.after repair SD this problem comes and i write PM and all ok.

01-30-2010, 06:10	#1 (permalink)
zone3 No Life Poster Join Date: Jan 2009 Posts: 3,260 Member: 946381 Status: Offline Thanks Meter: 150	5220 superdongle area damaged-so charger not supported -help i have a 5220 contact service-info as below MCU SW version: V 07.23 17-07-09 RM-411 (c) Nokia PCI version: RFIC version: 064c0601 DSP version: ICPR72_09w17 LCD version: SHARP PPM version: V 07.23 17-07-09 RM-411 (c) Nokia A BT MCM version: 2222-143C Retu version: 15 Tahvo version: 22 Content Pack version: Content: a_a_green V 07.23 17-07-09 RM-411 (c) Nokia Production serial number: 0 Product code: Module code: Basic production code: Flash code: Order number: Product specific data: Long production SN: 0 ATO: Default SN type: IMEI plain: 353662018670372 IMEI spare to net: 3A 35 66 02 81 76 30 07 IMEI SV to net: 33 35 66 02 81 76 30 47 F0 LOCK STATUS: CONFIG KEY: 0000000000000000 PROVIDER KEY: 0000000000000000 Provider: Unknown provider Key Code count: 0, FBUS Code count: 0 i repair sp area using cyclone using credits-now contact service ok-but when charger connect ""CHARGER NOT SUPPORTED""-so tried sx4-but error-so i know super dongle damaged. how repair it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 6500C Charger not supported help..help	pamukelektronik	Nokia Hardware & Hardware Repair	49	12-04-2013 23:50
2760 charger not supported HELP	ruwanjk	Nokia Hardware & Hardware Repair	22	04-22-2011 13:25
nokia 7390 charger not supported help!!!	watari31	Nokia Base Band 5 ( BB-5 )	3	04-22-2010 15:28
5220 superdongle area damaged-can i repair using cyclone?	zone3	Cyclonebox	4	01-30-2010 07:50
??????? 8600 charger not supported, help me brothers.	lijgeorge	Nokia Hardware & Hardware Repair	0	07-30-2008 17:49

01-30-2010, 06:41	#2 (permalink)
Maiwand khan No Life Poster Join Date: Jun 2006 Location: Afghanistan Kabul Posts: 2,197 Member: 295886 Status: Offline Sonork: 100.1583369 Thanks Meter: 1,472	SD repaire not possible with cyclone yet. wait for update or use another tools to repair SD but u will need credits for it.

01-30-2010, 06:45	#3 (permalink)
.::kabir::. No Life Poster Join Date: Nov 2007 Location: mobile solution Posts: 830 Member: 638416 Status: Offline Sonork: 100.1591787 Thanks Meter: 1,113	you can try with mx-key

01-30-2010, 07:50	#6 (permalink)
rontekgsm Freak Poster Join Date: Nov 2006 Location: MX-KEY is the BEST NOKIA TOOL Posts: 209 Member: 392166 Status: Offline Thanks Meter: 56	To make sure if SD is damage Power phone on and standby for at least 3 minutes If phone shuts down in 3 minutes it means superdongle is invalid That is why SD damage is watchdog timer enabled and shuts down in 3 minutes Also if phone not shuts down in 3 minutes solution is write pm with sx4 auth Charging calibration is also located in phones PM file

01-30-2010, 08:14	#8 (permalink)
soshan No Life Poster Join Date: Sep 2007 Location: iran-shushtar Posts: 3,552 Member: 592636 Status: Offline Thanks Meter: 674	sd repair availble by othere tools i hope very soon release new update by best supporter(alex).

01-30-2010, 09:53	#9 (permalink)
asad_nomy7 No Life Poster Join Date: Aug 2007 Location: Pakistan Posts: 2,306 Member: 570093 Status: Offline Thanks Meter: 1,067	Just Write full modified PM to to your 5220 With SX4 authentication.i do it many time by MT.after repair SD this problem comes and i write PM and all ok.