"Dead phone USB flashing" on Phoenix - GSM-Forum

fabio84 · 01-12-2007, 03:23

Hi friend, when I click on Start processo I have this message:

Checking, whether the USB connection is used, failed
HRESULT 0x80042000 (-2147213312)
Connection: Connection not open;MTI32=0x80042000||Connection type determining failed;AmsFlashFN=0x80042000

Whyyyyyy ???

fabio84 · 01-12-2007, 12:43

I have installed phoenix_service_sw_2006_44_6_163.exe mhmmm but have Error in first post when I use "USB DEAD" Why??? Help

Haribo11 · 01-12-2007, 17:40

http://forum.gsmhosting.com/vbb/showthread.php?t=355739

Haribo

fabio84 · 01-12-2007, 17:50

not wooork... Errorrr usb when I click start :-(

Mobileforce · 01-12-2007, 18:28

Hi

Please try to flash a working phone first, this will help us see if Pheonix is working properly...

If all is fine with another working phone, then proceed to dead flash...

The normal procedure for dead flashing is simple.

1: Start Pheonix,
2: Select Product etc etc etc
3: Make sure Dead USB or USB Dead (which ever way it is) is ticked.
4: Now with good battery and cable in USB port, connect to phone and press power button for few seconds, if phone is such state to dead flash - you will hear a ding dong from windows then a box will popup asking for drivers, install the drivers for the phone your flashing then proceed to dead flash...

It is simple even tho it sounds tricky, practice makes perfect so keep trying.

br,
Danny.

fabio84 · 01-13-2007, 01:20

:-( not wooork... I have installed phoenix with crack... all ok no error...
But I select product code and flag dead phone.... preesss START and immediatly exit error usb message!!! :-( Whyyyyyyyyyyyyyyyyyyyyyy

da123 · 01-13-2007, 02:28

Quote:

Originally Posted by fabio84

:-( not wooork... I have installed phoenix with crack... all ok no error...
But I select product code and flag dead phone.... preesss START and immediatly exit error usb message!!! :-( Whyyyyyyyyyyyyyyyyyyyyyy

Make sure the connection type is "NO CONNECTION" for dead phone flashing.

fabio84 · 01-13-2007, 11:56

All OK nowww... depending on firmware open... with rm-78 it's ok but I select RM-1 give me USB ERROR. The rm-1 firmware not compatible now with "usb dead flash" :-(

nederlines · 01-18-2007, 03:14

Hello, I have a problem with my nokia n70, I was updating from NSU and the telephone went out suddenly, and now the screen shows "nokia" but the light not is ignited, the telephone not is ignited. I need help, believe that I can arrange this problem with the file:

RM-70 data package v 3.0 (MCU SW 3.56) or later

Can someone help me? Thank you very much for anticipated. A greeting

ValdikSS · 04-27-2007, 08:10

I have the same problem. Nokia 6681 (RM-57).
I tried to rename folder RM-57 to RM-78 and to edit files, but I have the same.

What can I do? I NEED help! Please, people!

ValdikSS · 04-27-2007, 10:13

Currently Active Users: 2497
And nobody can help me! PLEASE HELP!!!

hassan35278 · 04-27-2007, 16:19

im getting tired from who those want everything from nothing go and spend few dollars man and no crack sxxt then then we can assist u

ValdikSS · 04-28-2007, 04:44

hassan35278 your age is 32 and my is 14, I get money from cracks because I am cracker and I am in S.T.A.R.S. TeaM, and I RUSSIAN =)

hassan35278 · 04-28-2007, 10:00

well valdikss u should be in school

mobilelatham · 04-28-2007, 14:42

@Valdiss
Go To Bed

Go to File-->manage connection Select "No Conection" --> Save--> Apply
go to file--> Open Product Find your model
flash selecting dead phone flash

01-12-2007, 03:23	#1 (permalink)
fabio84 Insane Poster Join Date: Jul 2004 Location: Italy Age: 40 Posts: 80 Member: 72623 Status: Offline Thanks Meter: 0	"Dead phone USB flashing" on Phoenix Hi friend, when I click on Start processo I have this message: Checking, whether the USB connection is used, failed HRESULT 0x80042000 (-2147213312) Connection: Connection not open;MTI32=0x80042000\|\|Connection type determining failed;AmsFlashFN=0x80042000 Whyyyyyy ???

01-13-2007, 11:56	#8 (permalink)
fabio84 Insane Poster Join Date: Jul 2004 Location: Italy Age: 40 Posts: 80 Member: 72623 Status: Offline Thanks Meter: 0	All OK nowww... depending on firmware open... with rm-78 it's ok but I select RM-1 give me USB ERROR. The rm-1 firmware not compatible now with "usb dead flash" :-( Last edited by fabio84; 01-13-2007 at 12:45.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Success with dead phone USB flashing on a 6280	anonymoushacker	Nokia Base Band 5 ( BB-5 )	21	10-02-2006 01:07
@Andro - will you support USB flashing on BB5 phones	X8000	MT-BOX	23	06-23-2006 17:18
Dead phone usb flashing with Phoenix	Murat Bekar	MT-BOX	4	06-08-2006 09:16
USB Smart on OLD AVR Phones	socal	SonyEricsson (USB-Smart)	0	12-16-2005 06:50

01-12-2007, 12:43	#2 (permalink)
fabio84 Insane Poster Join Date: Jul 2004 Location: Italy Age: 40 Posts: 80 Member: 72623 Status: Offline Thanks Meter: 0	I have installed phoenix_service_sw_2006_44_6_163.exe mhmmm but have Error in first post when I use "USB DEAD" Why??? Help

01-12-2007, 17:40	#3 (permalink)
Haribo11 Insane Poster Join Date: Oct 2006 Posts: 82 Member: 371047 Status: Offline Thanks Meter: 13	http://forum.gsmhosting.com/vbb/showthread.php?t=355739 Haribo

01-12-2007, 17:50	#4 (permalink)
fabio84 Insane Poster Join Date: Jul 2004 Location: Italy Age: 40 Posts: 80 Member: 72623 Status: Offline Thanks Meter: 0	not wooork... Errorrr usb when I click start :-(

01-12-2007, 18:28	#5 (permalink)
Mobileforce Freak Poster Join Date: Oct 2006 Location: Bradford, West Yorkshire, UK Posts: 106 Member: 373231 Status: Offline Thanks Meter: 5	Hi Please try to flash a working phone first, this will help us see if Pheonix is working properly... If all is fine with another working phone, then proceed to dead flash... The normal procedure for dead flashing is simple. 1: Start Pheonix, 2: Select Product etc etc etc 3: Make sure Dead USB or USB Dead (which ever way it is) is ticked. 4: Now with good battery and cable in USB port, connect to phone and press power button for few seconds, if phone is such state to dead flash - you will hear a ding dong from windows then a box will popup asking for drivers, install the drivers for the phone your flashing then proceed to dead flash... It is simple even tho it sounds tricky, practice makes perfect so keep trying. br, Danny.

01-13-2007, 01:20	#6 (permalink)
fabio84 Insane Poster Join Date: Jul 2004 Location: Italy Age: 40 Posts: 80 Member: 72623 Status: Offline Thanks Meter: 0	:-( not wooork... I have installed phoenix with crack... all ok no error... But I select product code and flag dead phone.... preesss START and immediatly exit error usb message!!! :-( Whyyyyyyyyyyyyyyyyyyyyyy

01-18-2007, 03:14	#9 (permalink)
nederlines Junior Member Join Date: Jan 2007 Posts: 11 Member: 433705 Status: Offline Thanks Meter: 0	Hello, I have a problem with my nokia n70, I was updating from NSU and the telephone went out suddenly, and now the screen shows "nokia" but the light not is ignited, the telephone not is ignited. I need help, believe that I can arrange this problem with the file: RM-70 data package v 3.0 (MCU SW 3.56) or later Can someone help me? Thank you very much for anticipated. A greeting

04-27-2007, 08:10	#10 (permalink)
ValdikSS Junior Member Join Date: Apr 2006 Posts: 17 Member: 261298 Status: Offline Thanks Meter: 1	I have the same problem. Nokia 6681 (RM-57). I tried to rename folder RM-57 to RM-78 and to edit files, but I have the same. What can I do? I NEED help! Please, people!

04-27-2007, 10:13	#11 (permalink)
ValdikSS Junior Member Join Date: Apr 2006 Posts: 17 Member: 261298 Status: Offline Thanks Meter: 1	Currently Active Users: 2497 And nobody can help me! PLEASE HELP!!!

04-27-2007, 16:19	#12 (permalink)
hassan35278 Freak Poster Join Date: Aug 2005 Location: lebanon Age: 49 Posts: 477 Member: 166506 Status: Offline Thanks Meter: 18	im getting tired from who those want everything from nothing go and spend few dollars man and no crack sxxt then then we can assist u

04-28-2007, 04:44	#13 (permalink)
ValdikSS Junior Member Join Date: Apr 2006 Posts: 17 Member: 261298 Status: Offline Thanks Meter: 1	hassan35278 your age is 32 and my is 14, I get money from cracks because I am cracker and I am in S.T.A.R.S. TeaM, and I RUSSIAN =)

04-28-2007, 10:00	#14 (permalink)
hassan35278 Freak Poster Join Date: Aug 2005 Location: lebanon Age: 49 Posts: 477 Member: 166506 Status: Offline Thanks Meter: 18	well valdikss u should be in school

04-28-2007, 14:42	#15 (permalink)
mobilelatham Freak Poster Join Date: Jul 2006 Location: Barnsley Age: 37 Posts: 409 Member: 306991 Status: Offline Thanks Meter: 62	@Valdiss Go To Bed Go to File-->manage connection Select "No Conection" --> Save--> Apply go to file--> Open Product Find your model flash selecting dead phone flash