N80 - Problem in creating ask or boot the phone - GSM-Forum

ARC · 07-07-2007, 15:24

Phone is in: Local mode
Model: RM-92 ( N80)
V 05wk33v35.2/12-10-06/RM-92 (c) Nokia.
Production serial number SEJ613781
Product code 0526976
Module code 0202689
Basic production code 0522205
Flash code
Order number
Long production SN
MCU SW V 05wk33v35.2/12-10-06/RM-92/(c) Nokia.
HW 6002
PCI
RFIC 17191719
DSP miro_05wk32v37b
APE SW Core V 4.0632.0.38/13-10-2006/RM-92/
APE Variant V 4.0632.0.38-09/13-10-2006/RM-92/
Retu 14
Tahvo 21
APE HW 1
APE ADSP SW 256
Camera 1
APE BT HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.
IMEI: 358361008980363
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
Failed to boot send APE 2ND (bad APE)
--------------------------------------
Ask creation failed.

used MT version is 1.30b and 1.32

is it my cable problem?!
if yes, please give me link for good N80 cable schematic for using with MT-BOX

ARC · 07-07-2007, 15:40

Really strange...
phone works suddenly... on MT-BOX 1.30b

Phone is in: Test mode
Model: RM-92 ( N80)
V 05wk33v35.2/12-10-06/RM-92 (c) Nokia.
Production serial number SEJ613781
Product code 0526976
Module code 0202689
Basic production code 0522205
Flash code
Order number
Long production SN
MCU SW V 05wk33v35.2/12-10-06/RM-92/(c) Nokia.
HW 6002
PCI
RFIC 17191719
DSP miro_05wk32v37b
APE SW Core V 4.0632.0.38/13-10-2006/RM-92/
APE Variant V 4.0632.0.38-09/13-10-2006/RM-92/
Retu 14
Tahvo 21
APE HW 1
APE ADSP SW 256
Camera 1
APE BT HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.
IMEI: 358361008980363
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_xsr.fg
BOOT OK...

but not works on MT-BOX 1.32
and don't tell me uncheck TX2 line, i already tested with and without TX2line

MTBOX: xxxxxxx - Nokia Flash/Repair v1_32
Box: CR V 1.001 256
Code: NK V 1.001 1046
SN: xxxxxxxxxxx
Nokia Unlimited: 1269 times started
SonyEricsson Trial: 3 left, each max 15min
============= Set Flash mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
Using Tx2 Data line.
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
Failed to find APE FlashLoader ( bad APE RAM / bad APE flash
Phone Type: BB5
------------------- SYSTEM ID Response: 12 blocks -------------
SYSTEM_ASIC_ID( APE ):
17100708
ASIC_MODE_ID( APE ):
00
PUBLIC_ID( APE ):
AFD872681A5CDC89668D75DE8C69246C81A84189
ROOT_KEY_HASH( APE ):
49A97E826B93BA20B7ED0B082475C00500000000
ROM_ID( APE ):
1DFD66132C872FD4
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006010C192101003000
EM_ASIC_ID( RAP ):
00000294
EM_ASIC_ID( RAP ):
00000B21
PUBLIC_ID( RAP ):
21E0000B96BD0054B1300281F4D661F0F1047A32
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
BAF3A9C3DBFA8454937DB77F2B8852B1
ROM_ID( RAP ):
273F6D55DFAAF68F
--------------- Device ID Response: 2 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Samsung, 00EC 22E8 0000 6921
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Model: RM-92 ( N80)
V 05wk33v35.2/12-10-06/RM-92 (c) Nokia.
IMEI: 358361008980363
Boot...
Failed to find RAP3 2nd loader
Boot...
Failed to find RAP3 2nd loader

now phone works on MT-BOX 1.30b charmly, but not on 1.32
same cable, same box , same phone
seems 1.32 is buggy

MTBOX: xxxxxxxx - Nokia Flash/Repair v1.30beta
Box: CR V 1.001 256
Code: NK V 1.001 1045
SN: xxxxxxxx
Nokia Unlimited: 1270 times started
SonyEricsson Trial: 3 left, each max 15min
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_xsr.fg
BOOT OK...

meisam · 07-07-2007, 15:41

Possiblities:
1.Try with 1.33
2.Your cable seems to be OK since phone is in LOCAL MODE and possible info is read from ur phone.
3.Hold the cable firmly so that conncetors fit each other.
4Hardware problem is more probable(i guess so).Check the phone hardware first.

911GT · 07-09-2007, 11:03

latest version is 1.33!!!!!!!!
"but not works on MT-BOX 1.32
and don't tell me uncheck TX2 line, i already tested with and without TX2line"
1.32 never use TX2!!!!!!!!!
try with 1.33 and WITH TX2 cable connected !!!!!!!!!!!!!!!!!!!

07-07-2007, 15:24	#1 (permalink)
ARC No Life Poster Join Date: Jun 2001 Location: UAE Age: 43 Posts: 1,419 Member: 5019 Status: Offline Sonork: 100.110196 Thanks Meter: 69	N80 - Problem in creating ask or boot the phone Phone is in: Local mode Model: RM-92 ( N80) V 05wk33v35.2/12-10-06/RM-92 (c) Nokia. Production serial number SEJ613781 Product code 0526976 Module code 0202689 Basic production code 0522205 Flash code Order number Long production SN MCU SW V 05wk33v35.2/12-10-06/RM-92/(c) Nokia. HW 6002 PCI RFIC 17191719 DSP miro_05wk32v37b APE SW Core V 4.0632.0.38/13-10-2006/RM-92/ APE Variant V 4.0632.0.38-09/13-10-2006/RM-92/ Retu 14 Tahvo 21 APE HW 1 APE ADSP SW 256 Camera 1 APE BT HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13. IMEI: 358361008980363 Boot... rap3gv3_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg Failed to boot send APE 2ND (bad APE) -------------------------------------- Ask creation failed. used MT version is 1.30b and 1.32 is it my cable problem?! if yes, please give me link for good N80 cable schematic for using with MT-BOX

07-07-2007, 15:41	#3 (permalink)
meisam No Life Poster Join Date: Feb 2005 Location: IRAN(land of heros) Age: 44 Posts: 2,680 Member: 115172 Status: Offline Thanks Meter: 212	Possiblities: 1.Try with 1.33 2.Your cable seems to be OK since phone is in LOCAL MODE and possible info is read from ur phone. 3.Hold the cable firmly so that conncetors fit each other. 4Hardware problem is more probable(i guess so).Check the phone hardware first. Last edited by meisam; 07-07-2007 at 15:59.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem in download http://www.boot-loader.com	patric	Smart-Clip	2	05-14-2017 00:23
My Spiderman Box Cant read ,flash or farmat the phone After Updating the BoX	NawabN Sahoo	SpiderMan	6	06-21-2008 08:25
Unlock NOKIA BB5 without TP, or opening the phone, or credits ... and many more.	MANOLE	Main Sales Section	0	05-13-2008 19:07

07-07-2007, 15:40	#2 (permalink)
ARC No Life Poster Join Date: Jun 2001 Location: UAE Age: 43 Posts: 1,419 Member: 5019 Status: Offline Sonork: 100.110196 Thanks Meter: 69	Really strange... phone works suddenly... on MT-BOX 1.30b Phone is in: Test mode Model: RM-92 ( N80) V 05wk33v35.2/12-10-06/RM-92 (c) Nokia. Production serial number SEJ613781 Product code 0526976 Module code 0202689 Basic production code 0522205 Flash code Order number Long production SN MCU SW V 05wk33v35.2/12-10-06/RM-92/(c) Nokia. HW 6002 PCI RFIC 17191719 DSP miro_05wk32v37b APE SW Core V 4.0632.0.38/13-10-2006/RM-92/ APE Variant V 4.0632.0.38-09/13-10-2006/RM-92/ Retu 14 Tahvo 21 APE HW 1 APE ADSP SW 256 Camera 1 APE BT HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13. IMEI: 358361008980363 Boot... rap3gv3_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_xsr.fg BOOT OK... but not works on MT-BOX 1.32 and don't tell me uncheck TX2 line, i already tested with and without TX2line MTBOX: xxxxxxx - Nokia Flash/Repair v1_32 Box: CR V 1.001 256 Code: NK V 1.001 1046 SN: xxxxxxxxxxx Nokia Unlimited: 1269 times started SonyEricsson Trial: 3 left, each max 15min ============= Set Flash mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 Boot... Using Tx2 Data line. rap3gv3_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg Failed to find APE FlashLoader ( bad APE RAM / bad APE flash Phone Type: BB5 ------------------- SYSTEM ID Response: 12 blocks ------------- SYSTEM_ASIC_ID( APE ): 17100708 ASIC_MODE_ID( APE ): 00 PUBLIC_ID( APE ): AFD872681A5CDC89668D75DE8C69246C81A84189 ROOT_KEY_HASH( APE ): 49A97E826B93BA20B7ED0B082475C00500000000 ROM_ID( APE ): 1DFD66132C872FD4 SYSTEM_ASIC_ID( RAP ): 000000010000022600010006010C192101003000 EM_ASIC_ID( RAP ): 00000294 EM_ASIC_ID( RAP ): 00000B21 PUBLIC_ID( RAP ): 21E0000B96BD0054B1300281F4D661F0F1047A32 ASIC_MODE_ID( RAP ): 00 ROOT_KEY_HASH( RAP ): BAF3A9C3DBFA8454937DB77F2B8852B1 ROM_ID( RAP ): 273F6D55DFAAF68F --------------- Device ID Response: 2 blocks ------------- Storage Device: Owner Asic: RAP Type: NOR Flash Index: 0 Flash: Samsung, 00EC 22E8 0000 6921 Storage Device Contents: Owner Asic: RAP 000000000000000000000000000000000000 ============= Set FBus mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 Phone is in: Local mode Model: RM-92 ( N80) V 05wk33v35.2/12-10-06/RM-92 (c) Nokia. IMEI: 358361008980363 Boot... Failed to find RAP3 2nd loader Boot... Failed to find RAP3 2nd loader now phone works on MT-BOX 1.30b charmly, but not on 1.32 same cable, same box , same phone seems 1.32 is buggy MTBOX: xxxxxxxx - Nokia Flash/Repair v1.30beta Box: CR V 1.001 256 Code: NK V 1.001 1045 SN: xxxxxxxx Nokia Unlimited: 1270 times started SonyEricsson Trial: 3 left, each max 15min Boot... rap3gv3_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_xsr.fg BOOT OK...

07-09-2007, 11:03	#4 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	latest version is 1.33!!!!!!!! "but not works on MT-BOX 1.32 and don't tell me uncheck TX2 line, i already tested with and without TX2line" 1.32 never use TX2!!!!!!!!! try with 1.33 and WITH TX2 cable connected !!!!!!!!!!!!!!!!!!!