All about papua here-->newest versions-->questions

[SM4RTBOY]

Originally Posted by jesusangel

Ok finaly the phone is unlocked, if you enter Skey 3 times and push 5008 4 times phone will be unlocked too. But it isn't logic to do that.
If papuas coders had thought that the way to direct unlock was push freia.log button and then cancel, they did not have include the 5008 button.
And still not understanding what is the fuction of calculating Bkey with x65flasher. You must take a Coke an drink before every step, I assure to you that works 100%, phone is unlocked , it's the same, is useless for that case (unlock the phone).
I repeat, take care and don't play with papuas, and please add at the end of your manual to push Unlock Skey.
Regards

LIKE I SAID... never killed one phone ..
...but..if you dont like my tutorial ..make a new one for you ....
my steps are correct ...if you dont agree or kill your phones than dont blame me !

enjoy anyway !

sm4rtboy

[MR PROTEC]

Originally Posted by SM4RTBOY

LIKE I SAID... never killed one phone ..
...but..if you dont like my tutorial ..make a new one for you ....
my steps are correct ...if you dont agree or kill your phones than dont blame me

sm4rtboy

Originally Posted by essojay

Its you that may never learn more than you are told.... you can see he criticised and profer alternatives.. or what not be done, its now left to you to take the best of the 2 and merge it to your advantage.. not being the judge in a case you are a learner.
Let them brainstorm, its for you to wait and see where you can benefit, your comment is irrelevant at this stage.
bR

you did't get my point by the way m-xsmas
did you see the video or yet ?

[jesusangel]

Originally Posted by SM4RTBOY

LIKE I SAID... never killed one phone ..
...but..if you dont like my tutorial ..make a new one for you ....
my steps are correct ...if you dont agree or kill your phones than dont blame me !
enjoy anyway !
sm4rtboy

Merry Christmas

And still leaving Skey introduced.

[xcom]

I unlock C75 sw.11 and cx70 sw.43 with this method:
1. connect tp (c65 tp) and run x65PapuaUtilsV051_DE
with ''ersetze blocke 76,5008,5009,5077'' and ''pause'' checked
and start - pause 2 sec discconect tp - SKEY+BKEY - HASH+BKEY - power on
phone - send SKEY and phone unlocked
without use siemens eeprom tool and freia log and map.

[xcom]

also I repaired with this method one cx70 sw.43 dead after upload map with siemens eeprom tool from freia map (phone only beep).

[systemworm]

Originally Posted by xcom

I unlock C75 sw.11 and cx70 sw.43 with this method:
1. connect tp (c65 tp) and run x65PapuaUtilsV051_DE
with ''ersetze blocke 76,5008,5009,5077'' and ''pause'' checked
and start - pause 2 sec discconect tp - SKEY+BKEY - HASH+BKEY - power on
phone - send SKEY and phone unlocked
without use siemens eeprom tool and freia log and map.

U can also unlock your phone without diassembling it

[Blueman1]

plz send to me the tutorial video
[email protected]
Thx

[emso]

does anyone know where can i fin a font because everything i get is ahieroglifs and even if i know little russian i can't work with program at all

[uqbah]

dear all i need cf 75 flasher and flash file urgently
my siemens is dead and it only buzz

[jesusangel]

Originally Posted by uqbah

dear all i need cf 75 flasher and flash file urgently
my siemens is dead and it only buzz

Surely you only need to rewrite some eeprom blocks, or only full eeprom.

Say how your CF75 has become dead and maybe we can hekp you.

Regards

[unlockteam]

I´m triying to unlock a C72 via TP... it´s never conect... I´m Using 0.7.4

What this mean?

Automatic start... Transfer boot... Ashlar is not loaded!

??????????????????????????

[pchelpsi]

Hey!

I try to unlock c72 ver. 16 vith method like c65 with papua.
I made a test point, start program, Autoignition OK, I push power ON,
Transmit Boot...
Boot Loaded
Pause 2 sec....
I remove test point and do nothing
after that
Retrieve information
No answer to boot
Boot unlock.

and here ends everything

Did I need to push anything when I remove test point after "Pause 2sec" ?
Do I need to do anything else?
Please help me.

Regards,
Dejan

[yoms]

Send me tutorial [email protected]

[pchelpsi]

Everything works fine, only the setup in my program was wrong. C72 unlocked with papua 0.69 ver with no problem, with ver. 0.38 not working.

have a nice day

[uqbah]

Originally Posted by jesusangel

Surely you only need to rewrite some eeprom blocks, or only full eeprom.
Say how your CF75 has become dead and maybe we can hekp you.
Regards

i dont know how it become dead .
costomer give it to me that it is dead and i have to alive it.
in my personal experience it was dead during unlocking ....