Z240 reboots at unlocking - GSM-Forum

rvs · 05-07-2009, 15:40

Z240 enters good in Qualcom mode, but at the last step, the phone reboots.

Code:

Searching for Ultimate-Sam please wait
Clip found
setting Update mode..ok
ClipID=EE9Axxxx
Version :v2.17
phone lock set to 00000000
Phonelock disabled
User-simlock set to 00000000
User-simlock disabled


********** Modem info *************
ModelName:SGH-Z240
CountryCode:XEC
SWVer:Z240BGGC1_GE1
MemoryName:K5D1G13DCM
IMEI : 35382601470xxxx
Chipset info: 0M6250DVMSWE629350C
************************************
Uno de los dispositivos vinculados al sistema no funciona.

Tryed with "Bypass MSL" and without "Bypass MSL": same problem, phone reboots at end and lost comunication with phone...

Any idea or help?

B. R.

gsm_zone · 05-08-2009, 09:28

Quote:

Originally Posted by rvs

Z240 enters good in Qualcom mode, but at the last step, the phone reboots.

Code:

Searching for Ultimate-Sam please wait
Clip found
setting Update mode..ok
ClipID=EE9Axxxx
Version :v2.17
phone lock set to 00000000
Phonelock disabled
User-simlock set to 00000000
User-simlock disabled


********** Modem info *************
ModelName:SGH-Z240
CountryCode:XEC
SWVer:Z240BGGC1_GE1
MemoryName:K5D1G13DCM
IMEI : 35382601470xxxx
Chipset info: 0M6250DVMSWE629350C
************************************
Uno de los dispositivos vinculados al sistema no funciona.

Tryed with "Bypass MSL" and without "Bypass MSL": same problem, phone reboots at end and lost comunication with phone...

Any idea or help?

B. R.

what does this mean

Uno de los dispositivos vinculados al sistema no funciona.

rvs · 05-08-2009, 19:18

Quote:

Originally Posted by gsm_zone

what does this mean

Uno de los dispositivos vinculados al sistema no funciona.

My Windows XP is spanish, I translate it: "A device attached to the system is not working".

gsm_zone · 05-09-2009, 10:22

Quote:

Originally Posted by rvs

My Windows XP is spanish, I translate it: "A device attached to the system is not working".

did you reset the mobile phone
*2767*3855#

rvs · 05-09-2009, 10:30

Yes, I've reset the phone and the same problem.

I've unlocked other Z240 without problem, perhaps this phone has a problem

rvs · 06-11-2009, 16:00

Other Z240 Movistar Spain that I can't unlock with Ultimate Sam Clip.

The same problem. Then, I determinated to flash with different firmware. I've flashed with Z240XXGE1 (unbranded & with spanish language).

I try now to unlock, and phone does not reboot, but it is impossible to unlock:

Code:

Searching for Ultimate-Sam please wait
Clip found
setting Update mode..ok
ClipID=EE9xxxx
Version :v2.18
phone lock set to 00000000
Phonelock disabled
User-simlock set to 00000000
User-simlock disabled


********** Modem info *************
ModelName:SGH-Z240
CountryCode:XEC
SWVer:Z240BGGC1_GC2
MemoryName:K5D1G13DCM-D090
IMEI : 353826010xxxxxx
Chipset info: 0M6250DVMSWE629350C
************************************
Reading SECURE DATA....ok
Analyzing data../*****************************************/nDiagnostic data on failure, this will help us improve the software
 Unique Number = 3730353530303030303034383931000000000000
MSLADDR =52315950343837323733
chunck data =70CE08576A1E054379B1A23F199088DC
failed, assuming patched phone
Operation finished and took 00 Minutes and 17 Seconds

Please, provide solution for Z240 Movistar Spain, or indicate me some firmware able to unlock.

I don't want return more locked Z240's to client.

B.R.

gsm_zone · 06-11-2009, 18:12

Quote:

Originally Posted by rvs

Other Z240 Movistar Spain that I can't unlock with Ultimate Sam Clip.

The same problem. Then, I determinated to flash with different firmware. I've flashed with Z240XXGE1 (unbranded & with spanish language).

I try now to unlock, and phone does not reboot, but it is impossible to unlock:

Code:

Searching for Ultimate-Sam please wait
Clip found
setting Update mode..ok
ClipID=EE9xxxx
Version :v2.18
phone lock set to 00000000
Phonelock disabled
User-simlock set to 00000000
User-simlock disabled


********** Modem info *************
ModelName:SGH-Z240
CountryCode:XEC
SWVer:Z240BGGC1_GC2
MemoryName:K5D1G13DCM-D090
IMEI : 353826010xxxxxx
Chipset info: 0M6250DVMSWE629350C
************************************
Reading SECURE DATA....ok
Analyzing data../*****************************************/nDiagnostic data on failure, this will help us improve the software
 Unique Number = 3730353530303030303034383931000000000000
MSLADDR =52315950343837323733
chunck data =70CE08576A1E054379B1A23F199088DC
failed, assuming patched phone
Operation finished and took 00 Minutes and 17 Seconds

Please, provide solution for Z240 Movistar Spain, or indicate me some firmware able to unlock.

I don't want return more locked Z240's to client.

B.R.

do you always get this
failed, assuming patched phone

rvs · 06-11-2009, 18:17

With original firmware version: phones reboots and same erros as top of post.
Tried flashed with Z240XXGE1 and also with Z240DXGG1 and this error "failed, assuming patched phone"

gsm_zone · 06-12-2009, 10:30

Quote:

Originally Posted by rvs

With original firmware version: phones reboots and same erros as top of post.
Tried flashed with Z240XXGE1 and also with Z240DXGG1 and this error "failed, assuming patched phone"

did you try with another pc?

ps i think you flash a patch file on the phone

rvs · 06-12-2009, 12:46

Hi, I've didn't tried with other PC.

I've made full flash with Multiloader 5.32: Boot, Modem, Rsrc1, Rsrc2 and Factory FS

And alwaws the new error.

But now it is worse: I've seend "00000000" as code, and I tried with this for unlocking, and now the phone is freeze.

Of course, I've tried desfreeze, and the same error.

rvs · 06-12-2009, 12:58

I've flashed without problems with Z240XXGE1 and with Z240DXGG1. This files are downloaded using google. I don't think that these files are patched, I think that they are generic firmware, but if someone knows other firmware, I can try again.

gsm_zone · 06-12-2009, 14:06

Quote:

Originally Posted by rvs

Hi, I've didn't tried with other PC.

I've made full flash with Multiloader 5.32: Boot, Modem, Rsrc1, Rsrc2 and Factory FS

And alwaws the new error.

But now it is worse: I've seend "00000000" as code, and I tried with this for unlocking, and now the phone is freeze.

Of course, I've tried desfreeze, and the same error.

Quote:

Originally Posted by rvs

I've flashed without problems with Z240XXGE1 and with Z240DXGG1. This files are downloaded using google. I don't think that these files are patched, I think that they are generic firmware, but if someone knows other firmware, I can try again.

maybe you should try a different pc
I've searched the ultimate sam section and your the only one with problems with this phone

rvs · 06-12-2009, 15:56

Quote:

Originally Posted by gsm_zone

maybe you should try a different pc
I've searched the ultimate sam section and your the only one with problems with this phone

I just tried with other PC (new installation) and the same result.

.:Spitfire:. · 06-12-2009, 16:10

Quote:

Originally Posted by rvs

I just tried with other PC (new installation) and the same result.

Z240 is same as Z540 in unlocking method and is very different than qualcomm's supported by Ultimate-sam. Ultimate-sam does not support them as they are older generation qualcomm's. Only this 2 models are exception, all others are supported

rvs · 06-12-2009, 17:02

Quote:

Originally Posted by .:Spitfire:.

Z240 is same as Z540 in unlocking method and is very different than qualcomm's supported by Ultimate-sam. Ultimate-sam does not support them as they are older generation qualcomm's. Only this 2 models are exception, all others are supported

Then, you should add support for them, or delete from this post:
http://forum.gsmhosting.com/vbb/showthread.php?t=541579

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z240 failed to unlock using " Fast Direct Unlock "	A-H-T	UST Pro II	23	11-06-2009 11:43
M600 Reboot, solved. Unlock - reboot again, please help !	tian	SETool2	1	10-02-2008 15:12
Nokia 5200 is rebooting at start-up	debiany	Nokia Base Band 5 ( BB-5 )	6	09-13-2008 03:41
i can't unlock Z240 with easy unlocker	nasir iqbal	Easy-Unlocker	10	08-20-2007 14:06
ZV-10 Reboot at Startup Problem?	jim.mahoney	QUALCOMM Models (3G)	3	06-09-2007 16:55

05-09-2009, 10:30	#5 (permalink)
rvs Freak Poster Join Date: Aug 2002 Location: Spain Posts: 353 Member: 14494 Status: Offline Thanks Meter: 23	Yes, I've reset the phone and the same problem. I've unlocked other Z240 without problem, perhaps this phone has a problem

06-11-2009, 18:17	#8 (permalink)
rvs Freak Poster Join Date: Aug 2002 Location: Spain Posts: 353 Member: 14494 Status: Offline Thanks Meter: 23	With original firmware version: phones reboots and same erros as top of post. Tried flashed with Z240XXGE1 and also with Z240DXGG1 and this error "failed, assuming patched phone"

06-12-2009, 12:46	#10 (permalink)
rvs Freak Poster Join Date: Aug 2002 Location: Spain Posts: 353 Member: 14494 Status: Offline Thanks Meter: 23	Hi, I've didn't tried with other PC. I've made full flash with Multiloader 5.32: Boot, Modem, Rsrc1, Rsrc2 and Factory FS And alwaws the new error. But now it is worse: I've seend "00000000" as code, and I tried with this for unlocking, and now the phone is freeze. Of course, I've tried desfreeze, and the same error.

06-12-2009, 12:58	#11 (permalink)
rvs Freak Poster Join Date: Aug 2002 Location: Spain Posts: 353 Member: 14494 Status: Offline Thanks Meter: 23	I've flashed without problems with Z240XXGE1 and with Z240DXGG1. This files are downloaded using google. I don't think that these files are patched, I think that they are generic firmware, but if someone knows other firmware, I can try again.