How to find a pinout for Chinese phone? EASY! - GSM-Forum

Multi-box TEAM · 11-14-2007, 12:43

Dear clients! We often receive the question on how to find the pinout for Chinese phone. In fact approximately 98% of pinouts for all the Chinese phones are on our support zone. All you need is just to find the right one. How to do this? It's very simple! Here is an example how to find correct pinout for 18pin.

Try this way:

1) Find GND: put one probe on the "-" on the connector of PCB battery and use the second probe to find GND trying by turn the contacts.
Let's assume that 1- GND
2) After you have found the GND you need to go to the support zone and find all 18pinouts (at the moment there are 48 of them).
3) Check which of those pinouts have the same location of the GND signal as you have.
4) Finally you will find nearly 5 of 18pins with 1 - GND and different Rx Tx signals location.
5) All you need to do is to try these 5 schemes untill you find the correct one that will match.

nasirkhan007 · 11-14-2007, 13:14

hello brother

this is your all problem solution just look this pic

Multi-box TEAM · 11-14-2007, 13:37

This post was made for those of our customers who find your way difficult. As it was mentioned previously 98% of all pinouts for all Chinese phones are already on our support zone - all you need is just to find the right one (and we have given the suggestions how to do that). But anyway thank you for the info!

SHOEB AHMED · 11-24-2007, 16:53

vry good info
thenks...................................

kcgckc2002 · 12-03-2007, 04:42

how about autodetect pinouts, possible??? like sp?d?rm?n, that would make you box excellent for all chinese phones

GSMtricks · 12-03-2007, 09:52

For autodetection must be other hardware... must be 25 pins conector. Is not possible to make it with box, because hardware was made for other things... but if you need it.. and ready to buy box for only detection pinouts... post your opinion..

stivubicco · 12-03-2007, 16:40

that will be great news from support and am redy to pay for it go ahead every one of us will be willing instead of buying other box like ve pro box but make cheap price mh

nwaigbo · 12-03-2007, 22:31

yes that will be great and i will buy it too and multi -box will be the grandmaster of chinese phones, i am sure that in the coming months or years 60% of phones coming for repair will be china phones.

GSMtricks · 12-04-2007, 08:49

So please post your opinion about price.

Formingus · 12-04-2007, 09:14

thks for info but u can allso use search buton for chinese pinouts

jainmunda · 12-04-2007, 09:44

why dont u tell approx price for this hardware i think 90% of ur customers are ready to buy

kcgckc2002 · 12-05-2007, 04:16

actually its not just autodetection itself.....

it should include cables exclusive for chinese phones that has no need of soldering..... mostly consist of connectors for each type....

shama · 01-03-2008, 08:52

multi box is cheep and best very easy flasher box but prablam only pinout

maxieboy · 01-03-2008, 11:38

Quote:

Dear clients! We often receive the question on how to find the pinout for Chinese phone. In fact approximately 98% of pinouts for all the Chinese phones are on our support zone. All you need is just to find the right one. How to do this? It's very simple! Here is an example how to find correct pinout for 18pin.

Try this way:

1) Find GND: put one probe on the "-" on the connector of PCB battery and use the second probe to find GND trying by turn the contacts.
Let's assume that 1- GND
2) After you have found the GND you need to go to the support zone and find all 18pinouts (at the moment there are 48 of them).
3) Check which of those pinouts have the same location of the GND signal as you have.
4) Finally you will find nearly 5 of 18pins with 1 - GND and different Rx Tx signals location.
5) All you need to do is to try these 5 schemes untill you find the correct one that will match.

How to find the ground ? what gadget were to use to finf the ground?

PARMATMA · 01-30-2008, 18:02

Quote:

Originally Posted by shama

multi box is cheep and best very easy flasher box but prablam only pinout

Support area is full with pinouts and flashfiles only need to download.

b.r.
ultimate

11-14-2007, 12:43	#1 (permalink)
Multi-box TEAM No Life Poster Join Date: Aug 2006 Location: Hackers hell Posts: 1,040 Member: 327309 Status: Offline Sonork: 100.54567 Thanks: 6 Thanked 176 Times in 53 Posts	How to find a pinout for Chinese phone? EASY! Dear clients! We often receive the question on how to find the pinout for Chinese phone. In fact approximately 98% of pinouts for all the Chinese phones are on our support zone. All you need is just to find the right one. How to do this? It's very simple! Here is an example how to find correct pinout for 18pin. Try this way: 1) Find GND: put one probe on the "-" on the connector of PCB battery and use the second probe to find GND trying by turn the contacts. Let's assume that 1- GND 2) After you have found the GND you need to go to the support zone and find all 18pinouts (at the moment there are 48 of them). 3) Check which of those pinouts have the same location of the GND signal as you have. 4) Finally you will find nearly 5 of 18pins with 1 - GND and different Rx Tx signals location. 5) All you need to do is to try these 5 schemes untill you find the correct one that will match.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How to change LCD driver in Chinese phones for different LCD types?	debeliamark	Chinese Miracle & PinFinder	1	05-01-2009 18:20
Another way to find the pinout for Chinese phones!	Multi-box TEAM	Chinese Cocktail	14	10-27-2008 01:33
where to find eeprom file for chinese phones ?	gsmdok	Chinese Miracle & PinFinder	1	08-17-2008 11:20
how to find USB pinout ???	vnsun	Chinese Models & Cloned Phones	2	06-21-2008 13:15
how to find the pinout of first and second cpu of dual cpu phones	maximas75	Chinese Miracle & PinFinder	3	03-20-2008 05:38

11-14-2007, 13:37	#3 (permalink)
Multi-box TEAM No Life Poster Join Date: Aug 2006 Location: Hackers hell Posts: 1,040 Member: 327309 Status: Offline Sonork: 100.54567 Thanks: 6 Thanked 176 Times in 53 Posts	This post was made for those of our customers who find your way difficult. As it was mentioned previously 98% of all pinouts for all Chinese phones are already on our support zone - all you need is just to find the right one (and we have given the suggestions how to do that). But anyway thank you for the info!

11-24-2007, 16:53	#4 (permalink)
SHOEB AHMED No Life Poster Join Date: Jul 2005 Location: Play /-GSM-\ Field Age: 7 Posts: 3,497 Member: 161115 Status: Online Sonork: Here you can find it... Thanks: 317 Thanked 3,002 Times in 1,006 Posts	vry good info thenks...................................

12-03-2007, 04:42	#5 (permalink)
kcgckc2002 No Life Poster Join Date: Oct 2003 Location: Pearl of the Orient Posts: 1,369 Member: 42539 Status: Offline Thanks: 47 Thanked 183 Times in 78 Posts	how about autodetect pinouts, possible??? like sp?d?rm?n, that would make you box excellent for all chinese phones

12-03-2007, 09:52	#6 (permalink)
GSMtricks No Life Poster Join Date: Mar 2001 Age: 33 Posts: 11,022 Member: 3610 Status: Offline Sonork: 100.54638 Thanks: 168 Thanked 1,648 Times in 568 Posts	For autodetection must be other hardware... must be 25 pins conector. Is not possible to make it with box, because hardware was made for other things... but if you need it.. and ready to buy box for only detection pinouts... post your opinion..

12-03-2007, 16:40	#7 (permalink)
stivubicco No Life Poster Join Date: Nov 2005 Location: TANZANIA Age: 36 Posts: 962 Member: 202611 Status: Offline Thanks: 100 Thanked 53 Times in 48 Posts	that will be great news from support and am redy to pay for it go ahead every one of us will be willing instead of buying other box like ve pro box but make cheap price mh

12-03-2007, 22:31	#8 (permalink)
nwaigbo Freak Poster Join Date: Jul 2005 Age: 40 Posts: 375 Member: 165819 Status: Online Thanks: 40 Thanked 95 Times in 42 Posts	yes that will be great and i will buy it too and multi -box will be the grandmaster of chinese phones, i am sure that in the coming months or years 60% of phones coming for repair will be china phones.

12-04-2007, 08:49	#9 (permalink)
GSMtricks No Life Poster Join Date: Mar 2001 Age: 33 Posts: 11,022 Member: 3610 Status: Offline Sonork: 100.54638 Thanks: 168 Thanked 1,648 Times in 568 Posts	So please post your opinion about price.

12-04-2007, 09:14	#10 (permalink)
Formingus No Life Poster Join Date: Jul 2006 Location: dword ptr [ebp-1C], edx Posts: 3,759 Member: 322417 Status: Offline Thanks: 0 Thanked 530 Times in 266 Posts	thks for info but u can allso use search buton for chinese pinouts

12-04-2007, 09:44	#11 (permalink)
jainmunda No Life Poster Join Date: Sep 2004 Age: 36 Posts: 656 Member: 84128 Status: Offline Thanks: 11 Thanked 112 Times in 64 Posts	why dont u tell approx price for this hardware i think 90% of ur customers are ready to buy

12-05-2007, 04:16	#12 (permalink)
kcgckc2002 No Life Poster Join Date: Oct 2003 Location: Pearl of the Orient Posts: 1,369 Member: 42539 Status: Offline Thanks: 47 Thanked 183 Times in 78 Posts	actually its not just autodetection itself..... it should include cables exclusive for chinese phones that has no need of soldering..... mostly consist of connectors for each type....

01-03-2008, 08:52	#13 (permalink)
shama No Life Poster Join Date: Aug 2006 Location: in earth Posts: 800 Member: 333037 Status: Offline Sonork: 100.1611244 Thanks: 6 Thanked 54 Times in 46 Posts	multi box is cheep and best very easy flasher box but prablam only pinout