Post here successfully job with Z3X-BOX Samsung (2018-2022)

[yagui]

Samsung G930f S7 8.0 binary 3 frp reset
Hello
I have just removed frp on s7 g930f 8.0 b3
my device software was XXS3ERKC
somewhere in this forum got 8.0 combination file XXU3AR12 installed with z3x & did frp reset,following z3x instructions did full reset too.
installed original full firmware XXS3ERHD & problem solved.
Big thankyou to the person who uploaded binary 3 combination.
Thankyou Z3Xdone succesfully.

[celltellpb]

Operation: Read Codes via Server
Selected model: SM-J600FN
Software version: 34.8

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Sim
Waiting ADB device... OK
Obtendo informações do celular...
Modelo: SM-J600FN
Android version: 8.0.0
PDA version: J600FNXXU3ARJ1
CSC version: J600FNOXM3ARJ1
Versão do Celular: J600FXXU3ARJ1
Código do Produto: SM-J600FZDUTPH
CSC country code: portugal
CSC sales code: TPH
Phone SN: R58KC0CWJGZ
IMEI: 353566101603671
HW version: REV0.3A
RF cal date: 20181206
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Obtendo dados do celular... OK
Procurando servidor... OK
Checking server answer... OK
Executing... OK
Obtendo dados do celular... OK
Calculando... OK
Procurando servidor... OK
Waiting for server answer... OK
Código Freeze: 84814683
NET lock: 14273842
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

[syed tuqeer]

 Operation: Unlock
 Selected model: SM-J327P
 Software version: 34.8
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-J327P
 Android version: 6.0.1
 PDA version: J327PVPS4ARF2
 CSC version: J327PSPT4ARF2
 Phone version: J327PVPU4ARF2
 Product code: Not Active
 CSC country code: USA
 CSC sales code: XAS
 Phone SN: 00000000000
 IMEI: 352618096097541
 HW version: J327P.03
 RF cal date: 2017.07.01
 Chip name: MSM8937
 Modem board: MSM8917
 Security patch: 2018-06-01
 Boot Warranty bit: 0
 SIM State: ABSENT
 Searching Samsung diag port... detected COM124
 Writing data to phone... OK
 Rebooting phone... OK
 Unlock done

[mouhane]

Selected model: Z150
Selected port: COM31 Qualcomm Diagnostics Interface 3197
Selected port speed: 115200
Searching Samsung modem... detected COM32
Reading phone info...
Model: SGH-Z150
Phone version: Z150BAFF4
IMEI: 359016003696138
Reading data from phone... OK
Calculating... OK
Checking phone at COM31 OK
Bypass MSL... OK
Unlocking... OK
Unlock done
Codes set to 00000000
Done with Samsung Tool v.19.1
Done with Samsung Tool v.19.1

[-=C.J.S=-]

J320Y FRP DONE.....

     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
  
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' and follow the instructions in program.
  5. When process done, press 'Back' on phone and perform factory reset from phone settings.
    
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset. 

Operation: Reset FRP/React/EE
Selected model: SM-J320Y
Selected port: COM1 Communications Port
Software version: 34.6

Searching Samsung USB Flash interface... COM8 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.34.6

[dky_tel]

Operation: Unlock
Selected model: SGH-I777
Software version: 34.8

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SGH-I777
Android version: 2.3.6
PDA version: I777UCKK6
CSC version: I777ATTKK6
Phone version: I777UCKK6
Product code: SGH-I777ZKAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: 00000000000
IMEI: 358055041408
HW version: REV0.1
RF cal date: 2011.9.8
Chip name:
Modem board:
Checking Super user right... false
Rooting phone, please wait... OK
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.8

[fokal2008]

SAMSUNG SGH-T889 FLASHING DONE

[basim]

How much does 1 credit cost ?

[fokal2008]

LG 2-3G Tool v9.48
supported models: 1555

Mode: Emergency
Model: H635
Read info...
Laf Protocol: 01000003
Model name: LG-H635
Software verion: H63520b
Android verion: 6.0
Target operator: GLOBAL
Target country: COM
Chipset: msm8916
IMEI: 352431071080692
Elapsed: 8 secs. --> (v9.48)
 
Mode: Emergency
Model: H635
Read info...
Laf Protocol: 01000003
Model name: LG-H635
Software verion: H63520b
Android verion: 6.0
Target operator: GLOBAL
Target country: COM
Chipset: msm8916
IMEI: 352431071080692
Elapsed: 6 secs. --> (v9.48)
 
Phone mode is DOWNLOAD
Start flashing.
Laf Protocol: 01000003
  Open KDZ File : C:\Users\Top Model\Downloads\H63520a_00_0223_2.kdz
Checking file hash...
  Model : LG-H635
  SwVersion : H63520b
  BuildTime : 0000-00-00 00:00:00
  Total Files : 46
Model name: LG-H635
Software verion: H63520b
Android verion: 6.0
Target operator: GLOBAL
Target country: COM
Chipset: msm8916
IMEI: 352431071080692
Laf cmd error: LAF_CMD_UNLINK fail[LAF_ERROR_FAILED].
Start direct download mode
Write "PrimaryGPT" partition #1 of 46
Write "sbl1" partition #2 of 46
Write "tz" partition #3 of 46
Write "hyp" partition #4 of 46
Write "rpm" partition #5 of 46
Write "aboot" partition #6 of 46
Write "sbl1bak" partition #7 of 46
Write "tzbak" partition #8 of 46
Write "hypbak" partition #9 of 46
Write "rpmbak" partition #10 of 46
Write "abootbak" partition #11 of 46
Write "persist" partition #12 of 46
Write "laf" partition #13 of 46
Write "boot" partition #14 of 46
Write "recovery" partition #15 of 46
Skip "rct" partition #16 of 46
Write "cust" partition #17 of 46
Write "factory" partition #18 of 46
Write "modem" partition #19 of 46
Write "system" partition #20 of 46
Write "system" partition #21 of 46
Write "system" partition #22 of 46
Write "system" partition #23 of 46
Write "system" partition #24 of 46
Write "system" partition #25 of 46
Write "system" partition #26 of 46
Write "system" partition #27 of 46
Write "system" partition #28 of 46
Write "system" partition #29 of 46
Write "system" partition #30 of 46
Write "system" partition #31 of 46
Write "system" partition #32 of 46
Write "system" partition #33 of 46
Write "system" partition #34 of 46
Write "system" partition #35 of 46
Write "system" partition #36 of 46
Write "system" partition #37 of 46
Write "system" partition #38 of 46
Write "system" partition #39 of 46
Write "system" partition #40 of 46
Write "system" partition #41 of 46
Write "system" partition #42 of 46
Write "system" partition #43 of 46
Write "system" partition #44 of 46
Write "system" partition #45 of 46
Write "BackupGPT" partition #46 of 46
Erase "rct" partition
Done.
Elapsed: 380 secs. --> (v9.48)

[fokal2008]

LG G4(h635)GOOGLE ACCOUNT RESET DONE(FRP)DONE

Mode: Emergency
Model: H635
Read info...
Laf Protocol: 01000003
Model name: LG-H635
Software verion: H63520b
Android verion: 6.0
Target operator: GLOBAL
Target country: COM
Chipset: msm8916
IMEI: 352431071080692
Elapsed: 5 secs. --> (v9.48)
 
Phone mode is DOWNLOAD
Start reset Google Account Lock...
Laf Protocol: 01000003
Model name: LG-H635
Software verion: H63520b
Android verion: 6.0
Target operator: GLOBAL
Target country: COM
Chipset: msm8916
IMEI: 352431071080692
Reset ...
Reboot...
Elapsed: 4 secs. --> (v9.48)

[celltellpb]

Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Sim
Waiting ADB device... OK
Obtendo informações do celular...
Modelo: SM-J610FN
Android version: 8.1.0
PDA version: J610FNXXU1ARIO
CSC version: J610FNOXM1ARIO
Versão do Celular: J610FNXXU1ARIO
Código do Produto: SM-J610FZKNAUT
CSC country code: Switzerland
CSC sales code: AUT
Phone SN: R58K937RE7B
IMEI: 351765100177404
HW version: REV0.5A
RF cal date: 2018.09.17
Chip name: MSM8917
Modem board: MSM8917
Security patch: 2018-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Reiniciando celular... OK
Waiting ADB device... OK
Reiniciando celular... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Obtendo dados do celular... OK
Searching Ramdump interface... COM22 detected
Obtendo dados do celular... OK
Calculando... OK
Procurando servidor... OK
Waiting for server answer... OK
Código Freeze: 82681583
NET lock: 48574173
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.34.8

[taimur-ahmad]

samsung s4 decomo sc-04e convert to i9505

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SC-04E
Software version: 34.6

File analysis... OK
Total file size: 0x8498F408 (2121 Mb)
Searching USB Flash interface... COM54 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending boot.img... OK
Sending cache.img.ext4... OK
Sending hidden.img.ext4... OK
Sending modem.bin... OK
Sending NON-HLOS.bin... OK
Sending recovery.img... OK
Sending rpm.mbn... OK
Sending sbl2.mbn... OK
Sending sbl3.mbn... OK
Sending system.img.ext4... OK
Sending tz.mbn... OK
Flashing done (time - 00:03:41)

Done with Samsung Tool PRO v.34.6

[taimur-ahmad]

samsung j327p masl and spc code read done

UNLOCK INSTRUCTIONS:
Unlocking SPR via Diag:
Note! This unlock method is not permanent. It will work before next wiping or reflashing of phone.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings and press 'Read SPC/MSL' button.
5. Run dialer on phone, type ##3424#, enter SPC code and select 'DM+MODEM+ADB'.
6. Press 'Unlock...' button, select 'Unlock SPR DIAG'.

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read SPC
Selected model: SM-J327P
Software version: 34.8

Waiting ADB device... OK
Reading phone info...
Model: SM-J327P
Android version: 6.0.1
PDA version: J327PVPS4ARF2
CSC version: J327PSPT4ARF2
Phone version: J327PVPS4ARF2
Product code: Not Active
CSC country code: USA
CSC sales code: XAS
Phone SN: 00000000000
IMEI: 352618091589013
HW version: J327P.03
RF cal date: 2017.08.29
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-06-01
Boot Warranty bit: 1
SIM State: CARD_IO_ERROR
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
SPC: 732013

Done with Samsung Tool PRO v.34.8

[taimur-ahmad]

samsung j7 core j701f after update 8.0 touch not working done

1st flash full frimware 8.0 touch not working

then flash this file touch 100% work

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J701F
Software version: 34.6

File analysis... OK
Total file size: 0xFE97FF1A (4073 Mb)
Searching USB Flash interface... COM54 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Sending userdata.img.lz4... OK
Sending modem.bin.lz4... OK
Sending cache.img.lz4... OK
Sending hidden.img.lz4... OK
Flashing done (time - 00:03:25)
Done with Samsung Tool PRO v.34.6


FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J701F
Software version: 34.6

File analysis... OK
Total file size: 0x010D8000 (16 Mb)
Searching USB Flash interface... COM8 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Flashing done (time - 00:00:03)

Done with Samsung Tool PRO v.34.6

[taimur-ahmad]

samsung j7 core j701f after update 8.0 touch not working done

1st flash full frimware 8.0 touch not working

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J701F
Software version: 34.6

File analysis... OK
Total file size: 0xFE97FF1A (4073 Mb)
Searching USB Flash interface... COM54 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Sending userdata.img.lz4... OK
Sending modem.bin.lz4... OK
Sending cache.img.lz4... OK
Sending hidden.img.lz4... OK
Flashing done (time - 00:03:25)
Done with Samsung Tool PRO v.34.6



FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J701F
Software version: 34.6

File analysis... OK
Total file size: 0x010D8000 (16 Mb)
Searching USB Flash interface... COM8 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Flashing done (time - 00:00:03)

Done with Samsung Tool PRO v.34.6