Post here successfully job with Z3X-BOX Samsung (2018-2022)

[szktk]

Operation: Patch Certificate
Selected model: SM-B350E
Selected port:
Software version: 27.0

Waiting phone... detected COM98
Sending FDL... ok
Reconnecting phone... ok
Sending FDL2... ok
Reading data from phone ... ok
Writing data to phone... ok
Patching CERT check... done
Done with Samsung Tool PRO v.27.0

[holm615]

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-G532F
Software version: 39.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
PDA version: G532FXWU1AQG5
CSC version:
Phone version: G532FXXU1ARF3
Product code: SM-G532FMDD
CSC country code:
CSC sales code:
Phone SN: RV8K914HEMM
IMEI: 35778xxxxxxxxxxx
HW version: MP 0.300
RF cal date: 20181008
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-07-01
Boot Warranty bit: 1
SIM State: ABSENT,READY
Checking Super user right... true
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Preparation of data... OK
Writing data to phone... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.39.0

[chipscell25]

Operation: Read Codes via Server
Selected model: SM-G935A
Software version: 39.0

Checking Login and Password... OK
Ballance: 34 crd.
You have 34 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 8.0.0
PDA version: G935AUCS9CSB1
CSC version: G935AATT9CSB1
Phone version: G935AUCS9CSB1
Product code: SM-G935AZSAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: RF8HC0GY62E
IMEI: 352331xxxxxxxxx
HW version: REV0.7
RF cal date: 2016.12.06
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-02-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM489 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 16152813
NET lock: 29420858
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.39.0

[chipscell25]

Operation: Unlock
Selected model: SM-J260A
Software version: 39.0

Checking Login and Password... OK
Ballance: 29 crd.
You have 29 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J260A
Android version: 9
PDA version: J260AUCU3BSH6
CSC version: J260AATT3BSH6
Phone version: J260AUCU3BSH6
Product code: SM2J260AZKBATT
CSC country code: USA
CSC sales code: ATT
Phone SN: RF8M5328F8P
IMEI: 353568xxxxxxxx
HW version: REV1.0
RF cal date: 20190522
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2019-08-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting ADB device... OK
Searching Samsung diag port... detected COM2346
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.39.0

[qtouch]

Unlocking TMB using sever:


Operation: Unlock
Selected model: SM-G960U
Software version: 39.0

Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 8 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 9
PDA version: G960USQS5CSEA
CSC version: G960UOYN5CSEA
Phone version: G960USQU5ASE1
Product code: SM2G960UZPATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R58K60G1GVB
IMEI: 3569170XXXXXX20
HW version: REV1.1
RF cal date: 2019.08.09
Chip name: SDM845
Modem board: SDM845
Security patch: 2019-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... detected COM4
Reading phone info... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.39.0

[genci titi 2002]

Waiting ADB device... OK
Reading phone info...
Model: SM-A102U
Android version: 9
PDA version: A102USQU2ASHA
CSC version: A102UOYN2ASHA
Phone version: A102USQU2ASHA
Product code: SM-A102UZKCAIO
CSC country code: USA
CSC sales code: AIO
Phone SN: RF8MA0VAGCF
IMEI: 3586xxxxxxx7368
HW version: REV1.0
RF cal date: 20191007
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2019-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.39.0

[zaya21]

Operation: Read Codes
Selected model: SM-G532M
Software version: 38.10

Checking hash file...
Operation: Read Codes
Selected model: SM-G532M
Software version: 38.10

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G532M
Android version: 6.0.1
PDA version: G532MUMU1AQG5
CSC version: G532MUWE1AQG5
Phone version: G532MUBU1AQF1
Product code: SM-G532MZDADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: RV8J71ASS7E
IMEI: 35xxxxxxxxxxxx
HW version: MP 0.300
RF cal date: 20170722
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-07-01
Boot Warranty bit: 1
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM5 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:51)
Freeze code: 63062914
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 70869759
SIM lock: --------
For check lock status: *#7465625#
:RE:RE

[szktk]

Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
PDA version: G532FXWU1ARE1
CSC version: G532FOJV1ARE1
Phone version: G532FXXU1ARB1
Product code: SM-G532FZDDMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: RV8JB09WBWJ
IMEI: 35
HW version: MP 0.300
RF cal date: 20171107
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2018-05-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Preparation of data... OK
Writing data to phone... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.39.0

[sajidi1984]

After Very Long time Now Z3X Come Back With No Bugs


[ Unlock ] Operation: Unlock
[ Unlock ] Selected model: SM-G925T
[ Unlock ] Selected port: COM1 Communications Port
[ Unlock ] Software version: 39.0
[ Unlock ]
[ Unlock ] Waiting ADB device... OK
[ Unlock ] Reading phone info...
[ Unlock ] Model: SM-G925T
[ Unlock ] Android version: 7.0
[ Unlock ] PDA version: G925TUVU5FQK1
[ Unlock ] CSC version: G925TTMB5FQK1
[ Unlock ] Phone version: G925TUVU5FQK1
[ Unlock ] Product code: SM-G925TZDETMB
[ Unlock ] CSC country code: USA
[ Unlock ] CSC sales code: TMB
[ Unlock ] Phone SN: 00000000000
[ Unlock ] IMEI: 3577xxxxxxxxx
[ Unlock ] HW version: REV0.2
[ Unlock ] RF cal date: 20150528
[ Unlock ] Chip name: EXYNOS7420
[ Unlock ] Modem board: SHANNON333
[ Unlock ] Security patch: 2017-11-01
[ Unlock ] Boot Warranty bit: 1
[ Unlock ] SIM State: NETWORK_LOCKED
[ Unlock ] Checking Super user right... true
[ Unlock ] Reading NV data... OK
[ Unlock ] Checking NV data... OK
[ Unlock ] Initialization zTool... OK
[ Unlock ] Running zTool, please wait... OK
[ Unlock ] HWID: 88 5E AA 8E B5 07 00 00 00 00 00 00 00 00 00 00
[ Unlock ] Calculating... OK
[ Unlock ] Unlocking... OK
[ Unlock ] Writing NV data... OK
[ Unlock ] Rebooting phone... OK
[ Unlock ] Unlock done
[ Unlock ]

[qasir_amz]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Read codes ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950F
Software version: 38.11

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950F
Android version: 9
PDA version: G950FXXU6D***
CSC version: G950FEVR6DSK1
Phone version: G950FXXU6DSK5
Product code: SM-G950FZKAEVR
CSC country code: UK
CSC sales code: EVR
Phone SN: RF8J32KFW0Z
IMEI: 35508908-----
HW version: MP 0.700
RF cal date: 20170324
Chip name: EXYNOS8895
Modem board: SHANNON355
Security patch: 2019-11-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 58149183
NET lock: 96968625
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

[qasir_amz]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.

Operation: Patch Certificate
Selected model: SM-J320FN
Software version: 39.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J320FN
Android version: 5.1.1
PDA version: J320FNXXU0ARB1
CSC version: J320FNOXA0ARA1
Phone version: J320FNXXU0ARD1
Product code: SM-J320FZKNPHE
CSC country code: SPAIN
CSC sales code: PHE
Phone SN: R58J829C54X
IMEI:
HW version: MP 0.400
RF cal date: 2017.08.11
Chip name: SC9830I
Modem board: SC9830i
Security patch: 2018-03-01
Boot Warranty bit: unknown
Checking Super user right... true
Reading data from phone... OK
Patching CERT check... OK
Writing data to phone... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.39.0

[Yahia_Sb]

[chipscell25]

Operation: Read Codes via Server
Selected model: SM-A505G
Software version: 39.1

Checking Login and Password... OK
Ballance: 19 crd.
You have 19 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A505G
Android version: 9
PDA version: A505GUBS3ASI2
CSC version: A505GDOR3ASH2
Phone version: A505GDXU3ASH2
Product code: SM-A505GZKMDOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: R58MA5CK8FE
IMEI: 359767xxxxxxxxx
HW version: MP0.400
RF cal date: 20191023
Chip name: EXYNOS9610
Modem board: SHANNON337
Security patch: 2019-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 75361613
NET lock: 59139615
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.39.1

[qtouch]

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM13 SAMSUNG Mobile USB Serial Port
Software version: 39.1

Checking Login and Password... OK
Ballance: 27 crd.
You have 27 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 9
PDA version: N950USQS6DSI3
CSC version: N950UOYN6DSI3
Phone version: N950USQS6DSI3
Product code: SM2N950UZVAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38K103BGGP
IMEI: 351823XXXXXX745
HW version: REV1.0
RF cal date: 2018.01.06
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2019-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM13
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM21 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 24252829
NET lock: 73837386
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.39.1

[ernie78™]

sm-a107f ksa lock unlock done

Operation: Read Codes
Selected model: SM-A107F
Software version: 39.0

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-A107F
Android version: 9
PDA version: A107FXXU3ASI4
CSC version: A107FOJM3ASJ2
Phone version: A107FXXU3ASJ1
Product code: SM-A107FZKDKSA
CSC country code: KSA
CSC sales code: KSA
Phone SN: R9AMA1***AJ
IMEI: 352123113932309
HW version: MP1.0
RF cal date: 20191026
Chip name: MT6762
Modem board: MT6762
Security patch: 2019-09-01
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:23)
Freeze code: 17259206
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 93930273
SIM lock: --------
For check lock status: *#7465625#

Done with Samsung Tool PRO v.39.0