Post here successfully job with Z3X-BOX Samsung (2018-2022)

[chipscell25]

UNLOCK G920A BIT 7 done

Operation: Read Codes via Server
Selected model: SM-G920A
Software version: 37.0

Checking Login and Password... OK
Ballance: 7 crd.
You have 7 credit(s) left. This operation takes 0 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G920A
Android version: 7.0
PDA version: G920AUCS7ERC1
CSC version: G920AATT7ERC1
Phone version: G920AUCS7ERC1
Product code: SM2G920AZWAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38G60QZQKY
IMEI: 3588430xxxxxxxx
HW version: REV1.0
RF cal date: 20150623
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-03-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 81579161
NET lock: 26940357
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.37.0

[anrmobile]

Operation: Flash
Selected model: SM-G965U
Software version: 37.0

File analysis... OK
Total file size: 0x1D2696775 (7462 Mb)
Searching USB Flash interface... COM31 detected
Setup connection... OK
Getting device info... OK
Reading PIT from phone... OK
Sending abl.elf.lz4... OK
Sending xbl.elf.lz4... OK
Sending xbl_config.elf.lz4... OK
Sending tz.mbn.lz4... OK
Sending hyp.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending pmic.elf.lz4... OK
Sending aop.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending cmnlib64.mbn.lz4... OK
Sending keymaster64.mbn.lz4... OK
Sending qupv3fw.elf.lz4... OK
Sending sec.dat.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending bksecapp.mbn.lz4... OK
Sending storsec.mbn.lz4... OK
Sending vaultkeeper.mbn.lz4... OK
Sending engmode.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending vendor.img.ext4.lz4... OK
Sending system.img.ext4.lz4... OK
Sending persist.img.ext4.lz4... OK
Sending dqmdbg.img.ext4.lz4... OK
Sending carrier.img.ext4.lz4... OK
Sending modem.bin.lz4... OK
Sending dspso.bin.lz4... OK
Sending cache.img.ext4.lz4... OK
Sending odm.img.ext4.lz4... OK
Sending userdata.img.ext4.lz4... OK
Sending cache.img.ext4.lz4... OK
Flashing done (time - 02:19:28)
Done with Samsung Tool PRO v.37.0

[..::GMSR::..]

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A305F
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-A305F
Android version: 9
PDA version: A305FDDU1ASBC
CSC version: A305FOJM1ASBC
Phone version: A305FXXU1ASBA
Product code: SM-A305FZBEXFV
CSC country code: South Africa
CSC sales code: XFV
Phone SN: R58M40RZXRN
IMEI: 35
HW version: MP 0.200
RF cal date: 20190403
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2019-02-01
Boot Warranty bit: 1
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.37.0







REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A305F
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-A305F
Android version: 9
PDA version: A305FDDU1ASBC
CSC version: A305FOJM1ASBC
Phone version: A305FXXU1ASBA
Product code: SM-A305FZBEXFV
CSC country code: South Africa
CSC sales code: XFV
Phone SN: R58M40RZXRN
IMEI: 3500
HW version: MP 0.200
RF cal date: 20190403
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2019-02-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.37.0

[bendou]

m20 m205f unlock done


UNLOCK INSTRUCTIONS:
Unlocking using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-M205F
Software version: 37.0

Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-M205F
Android version: 8.1.0
PDA version: M205FDDU1ASAF
CSC version: M205FODM1ASA9
Phone version: M205FDDU1ASAE
Product code: SM-M205FDADINS
CSC country code: India
CSC sales code: INS
Phone SN: RZ8M215NYLT
IMEI: 353410103179911
HW version: REV0.4
RF cal date: 20190213
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2019-01-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 97042936
NET lock: 47593720
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.37.0

[..::GMSR::..]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Patch Certificate
Selected model: SM-G930F
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G930F
Android version: 8.0.0
PDA version: G930FXXU3ERJE
CSC version: G930FOJV3ERJF
Phone version: G930FXXU3ERJE
Product code: SM-G930FZDAXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: R58H51AP8VY
IMEI: 3500
HW version: MP 0.700
RF cal date: 20160509
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2018-11-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.37.0

[chipscell25]

Operation: Unlock
Selected model: SM-J320P
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J320P
Android version: 5.1.1
PDA version: J320PVPU1AOL2
CSC version: J320PSPT1AOL2
Phone version: J320PVPU1AOL2
Product code: Not Active
CSC country code: USA
CSC sales code: SPR
Phone SN: 00000000000
IMEI: 3552580xxxxxxxx
HW version: J320P.02
RF cal date: 2016.03.31
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2015-12-01
Boot Warranty bit: 0
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.37.0

[jamilahmed12315]

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A260F
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-A260F
Android version: 8.1.0
PDA version: A260FXXU1ASCG
CSC version: A260FOJM1ASCG
Phone version: A260FJVU1ASCA
Product code: SM-A260FZBAXFA
CSC country code: SOUTH AFRICA
CSC sales code: XFA
Phone SN: RF8M41AS65Y
IMEI: 356356596526257
HW version: MP 0.300
RF cal date: 20190409
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-03-01
Boot Warranty bit: 1
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.37.0
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-A260F
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-A260F
Android version: 8.1.0
PDA version: A260FXXU1ASCG
CSC version: A260FOJM1ASCG
Phone version: A260FJVU1ASCA
Product code: SM-A260FZBAXFA
CSC country code: SOUTH AFRICA
CSC sales code: XFA
Phone SN: RF8M41AS65Y
IMEI: 357896453645343
HW version: MP 0.300
RF cal date: 20190409
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-03-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.37.0

Sent from my SM-G960F using Tapatalk

[ericknio]

if resetting the device falls again?

[ericknio]

Read

Operation: Read CERT
Selected model: SM-J600GT
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J600GT
Android version: 9
PDA version: J600GTVJU3BSD7
CSC version: J600GTOWB3BSD1
Phone version: J600GTVJU3BSCA
Product code: SM-J600GZPCZTR
CSC country code: Brazil
CSC sales code: ZTR
Phone SN: RX8K903F7LM
IMEI: 3570710960*****
HW version: MP 0.300
RF cal date: 20180905
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: LOADED,LOADED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Saving cert... OK
Certificate file saved to C:\Program Files (x86)\Z3X\Samsung\SamsungToolPRO\backup\Cert\SM-J600GT_RX8K903F7L_35707009602***_35707109602***_8-10-2019_12-9-23.cert

Write

Operation: Write CERT
Selected model: SM-J600GT
Software version: 37.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J600GT
Android version: 9
PDA version: J600GTVJU3BSD7
CSC version: J600GTOWB3BSD1
Phone version: J600GTVJU3BSCA
Product code: SM-J600GZPCZTR
CSC country code: Brazil
CSC sales code: ZTR
Phone SN: RX8K903F7LM
IMEI: 357071096029053
HW version: MP 0.300
RF cal date: 20180905
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: ABSENT,LOADED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Checking certificate file... OK
KEY ID: 0504
Writing security... OK
Write CERT done
Rebooting phone... OK

no need root, very good!

[mehul 8123]

[ Unlock ] Operation: Unlock
[ Unlock ] Selected model: SM-N950U
[ Unlock ] Software version: 37.0
[ Unlock ]
[ Unlock ] Checking Login and Password... OK
[ Unlock ] Ballance: 15 crd.
[ Unlock ] You have 15 credit(s) left. This operation takes 8 credits.Continue? Yes
[ Unlock ] Waiting ADB device... OK
[ Unlock ] Reading phone info...
[ Unlock ] Model: SM-N950U
[ Unlock ] Android version: 9
[ Unlock ] PDA version: N950USQU6DSH3
[ Unlock ] CSC version: N950UOYN6DSH3
[ Unlock ] Phone version: N950USQU6DSH3
[ Unlock ] Product code: SM-N950UZKATMB
[ Unlock ] CSC country code: USA
[ Unlock ] CSC sales code: TMB
[ Unlock ] Phone SN: R28J80Q45ZH
[ Unlock ] IMEI: 35850
[ Unlock ] HW version: REV1.0
[ Unlock ] RF cal date: 2017.08.05
[ Unlock ] Chip name: MSM8998
[ Unlock ] Modem board: MSM8998
[ Unlock ] Security patch: 2019-08-01
[ Unlock ] Boot Warranty bit: 0
[ Unlock ] SIM State: ABSENT
[ Unlock ] Searching Samsung diag port... not found
[ Unlock ] Rebooting phone... OK
[ Unlock ] Waiting ADB device... OK
[ Unlock ] Rebooting phone... OK
[ Unlock ] Waiting ADB device... OK
[ Unlock ] Waiting for device to become ready... OK
[ Unlock ] Initialization zTool... OK
[ Unlock ] Running zTool, please wait... OK
[ Unlock ] Reading data from phone... OK
[ Unlock ] Rebooting to upload... OK
[ Unlock ] Searching Ramdump interface... COM32 detected
[ Unlock ] Reading data from phone... OK
[ Unlock ] Calculating... OK
[ Unlock ] Searching server... OK
[ Unlock ] Waiting for server answer... OK
[ Unlock ] Waiting ADB device... OK
[ Unlock ] Waiting for device to become ready... OK
[ Unlock ] Initialization zTool... OK
[ Unlock ] Running zTool, please wait... OK
[ Unlock ] Reading data from phone... OK
[ Unlock ] Rebooting phone... OK
[ Unlock ] Unlock done

[ahmer5050]

With Out Root With Out Credits.

Operation: Read Codes
Selected model: SM-J320A
Software version: 37.0

Checking hash file... OK
Searching Samsung modem... detected COM174
Reading phone info...
Model: SM-J320F
AP version: J320FUCS3AQD2
CSC version: J320AATT3AQD1
CP version: J320AUCS3AQG1
Product code: SM-J321AZDZXAC
Phone SN: R28H348JN4E
IMEI: ****************
Unique number: CQN00F091C4FC23
Incorrect model selected. This may damage your phone. Continue? Yes
Searching Samsung diag port... detected COM173
Reading phone info... OK
CP version: J320AUCS3AQG1
CP build: Jun 28 2017 20:09:05
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:08)
Freeze code: 71908263
NET lock: 85750486
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.37.0

[jnduwamahoro]

We need more updates, many features and brands not supported!!!! Once Again big updates/!!!

[MR.AD]

Waiting ADB device... OK
Reading phone info...
Model: SM-A260G
Android version: 8.1.0
PDA version: A260GDDU2ASE7
CSC version: A260GOLM2ASE7
Phone version: A260GDDU2ASE7
Product code: SM-A260GZKGINS
CSC country code: THAILAND
CSC sales code: THL
Phone SN: RZ8M61FVHKK
IMEI: 35*
HW version: MP 0.300
RF cal date: 20190613
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-05-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 60830364
NET lock: 86185947
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

[kesic]

Operation: Read Codes via Server
Selected model: SM-A705FN
Software version: 37.0

Checking Login and Password... OK
Ballance: 34 crd.
You have 34 credit(s) left. This operation takes 5 credits.Continue?  Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 9
PDA version: A705FNXXU3ASI2
CSC version: A705FNBHT3ASI2
Phone version: A705FNXXU3ASH1
Product code: SM-A705FZKUBHT
CSC country code: Bosnia
CSC sales code: BHT
Phone SN: R58M81VBQEX
IMEI: 359320101038xxx
HW version: MP 0.4A0
RF cal date: 2019.08.07
Chip name: SM6150
Modem board: SM6150
Security patch: 2019-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Calculating... OK
Freeze code: 29691517
NET lock: 07294953
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Rebooting phone... OK

Done with Samsung Tool PRO v.37.0

[..::GMSR::..]

Selected model: C3222
Selected com port: COM40
Selected speed port: 230400
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone SW: C3222JCJK1
Phone CSC: C3222OJCJK1
Phone BT ADDR: A075-91-FC6D01
Phone IMEI: 3
Deactivated MSL - TRUE
Unlock - ok
Elapsed time: 57 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------