Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 121 - GSM-Forum

denard · 08-13-2021, 13:42

Operation: Unlock via Server DIAG May 2020
Selected model: SM-A600A
Software version: 43.7

Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A600A
Android version: 9
PDA version: A600AUCS5BSI3
CSC version: A600AATT5BSI3
Phone version: A600AUCS5BSI3
Product code:
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: RF8K9206CEN
IMEI: 358485091xxxxxx
HW version: REV0.1
RF cal date: 20180919
Chip name: EXYNOS7884
Modem board: SHANNON327
Security patch: 2019-09-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM400
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Unlocking... OK
Unlock done
Done with Samsung Tool PRO v.43.7

chipscell25 · 08-14-2021, 22:14

Operation: Unlock SPR via Server NEW
Selected model: SM-A102U
Software version: 43.7

Checking Login and Password... OK
Balance: 21 crd.
You have 21 credit(s) left. This operation takes 10 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A102U
Android version: 9
PDA version: A102USQU8ATJ1
CSC version: A102UOYN8ATJ1
Phone version: A102USQU8ATJ1
Product code: SM2A102UZKDDSH
CSC country code: USA
CSC sales code: DSH
Carrier ID: BST
Phone SN: RF8N705PDHM
IMEI: 358688106XXXXXX
HW version: REV1.0
RF cal date: 20200701
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: LOADED
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Rebooting phone... OK

Done with Samsung Tool PRO v.43.7

jrbravo · 08-17-2021, 16:02

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J260T1
Android version: 8.1.0
PDA version: J260T1UVS5ATD1
CSC version: J260T1TMK5ATD1
Phone version: J260T1UVS5ATD1
Product code: SM2J260TZKATMK
CSC country code: USA
CSC sales code: TMK
Carrier ID: TMK
Phone SN: RF8M538D90T
IMEI: 356212103962628
HW version: REV1.0
RF cal date: 20190523
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2020-04-01
Boot Warranty bit: 0
SIM State: SIM_SERVICE_PROVIDER_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM113
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.43.7

jrbravo · 08-17-2021, 16:03

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J260T1
Android version: 8.1.0
PDA version: J260T1UVS5ATD1
CSC version: J260T1TMK5ATD1
Phone version: J260T1UVS5ATD1
Product code: SM2J260TZKATMK
CSC country code: USA
CSC sales code: TMK
Carrier ID: TMK
Phone SN: RF8M538D90T
IMEI: 356212103962628
HW version: REV1.0
RF cal date: 20190523
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2020-04-01
Boot Warranty bit: 0
SIM State: SIM_SERVICE_PROVIDER_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM113
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.43.7

Khan Bhaie · 08-17-2021, 17:31

Code:

Waiting ADB device... OK
Reading phone info...
Model: SM-J600F
Android version: 10
PDA version: J600FXXUACUB1
CSC version: J600FOJMACUB1
Phone version: J600FXXUACUB1
Product code: SM-J600FZVGXSG
CSC country code: UAE
CSC sales code: XSG
Carrier ID: XSG
Phone SN: XXXXXXX
IMEI: xxxxxxxxxxx
HW version: REV0.3A
RF cal date: 20180801
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2021-02-01
Boot Warranty bit: 1
SIM State: LOADED,ABSENT
Checking Super user right... true
Root version: 3.19:EFTSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.8

denard · 08-18-2021, 01:32

Operation: Repair Jul 2021
Selected model: SM-A105F
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-A105F
Android version: 10
PDA version: A105FDDU6BUD2
CSC version: A105FODM6BUD3
Phone version: A105FDDU6BUD2
Product code: SM-A105FZKGINS
CSC country code: India
CSC sales code: INS
Carrier ID: INS
Phone SN: RZ8M4037TKF
IMEI: 3566501xxxxxxxx
HW version: REV0.3
RF cal date: 20190401
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2021-04-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... false
A system-as-root phone type was detected. If root is installed, then need to restart the phone in recovery mode. Continue? Yes
Rebooting phone to recovery mode... OK
Waiting for device to become ready... OK
Checking Super user right... true
Root version: 3.19:EFTSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Reparing... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.8

Operation: Patch CERT Jul 2021
Selected model: SM-A105F
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-A105F
Android version: 10
PDA version: A105FDDU6BUD2
CSC version: A105FODM6BUD3
Phone version: A105FDDU6BUD2
Product code: SM-A105FZKGINS
CSC country code: India
CSC sales code: INS
Carrier ID: INS
Phone SN: RZ8M4037TKF
IMEI: 3566225400xxxxx
HW version: REV0.3
RF cal date: 20190401
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2021-04-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Root version: 3.19:EFTSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.8

denard · 08-18-2021, 01:34

Operation: Repair Jul 2021
Selected model: SM-A105F
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-A105F
Android version: 10
PDA version: A105FDDU6BUD2
CSC version: A105FODM6BUD3
Phone version: A105FDDU6BUD2
Product code: SM-A105FZKGINS
CSC country code: India
CSC sales code: INS
Carrier ID: INS
Phone SN: RZ8M4037TKF
IMEI: 3566501xxxxxxxx
HW version: REV0.3
RF cal date: 20190401
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2021-04-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... false
A system-as-root phone type was detected. If root is installed, then need to restart the phone in recovery mode. Continue? Yes
Rebooting phone to recovery mode... OK
Waiting for device to become ready... OK
Checking Super user right... true
Root version: 3.19:EFTSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Reparing... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.8

Operation: Patch CERT Jul 2021
Selected model: SM-A105F
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-A105F
Android version: 10
PDA version: A105FDDU6BUD2
CSC version: A105FODM6BUD3
Phone version: A105FDDU6BUD2
Product code: SM-A105FZKGINS
CSC country code: India
CSC sales code: INS
Carrier ID: INS
Phone SN: RZ8M4037TKF
IMEI: 3566225400xxxxx
HW version: REV0.3
RF cal date: 20190401
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2021-04-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Root version: 3.19:EFTSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.8

gsmhosting97 · 08-18-2021, 10:04

Samsung Galaxy J7 SM-J700F U4 Logo Stuck Boot Fix Done 100% || Z3x Box

https://*********/CrP2wFLNt-w

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J700F
Software version: 43.8

File analysis... OK
Total file size: 0x7A976D60 (1961 Mb)
Searching USB Flash interface... COM24 detected
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Flashing done (time - 00:01:58)

Done with Samsung Tool PRO v.43.8

100% Flash Done Without Any Risk With Z3x Box

jabbar butt · 08-18-2021, 14:11

Waiting ADB device... OK
Reading phone info...
Model: SM-G970F
Android version: 11
PDA version: G970FXXSBFUE6
CSC version: G970FOWOBFUE6
Phone version: G970FXXSBFUE6
Product code: SM-G970FZKDARO
CSC country code: Argentina
CSC sales code: ARO
Carrier ID: KSA
Phone SN: RF8M320PX9H
IMEI: 3588800
HW version: MP 0.700
RF cal date: 20190315
Chip name: EXYNOS9820
Modem board: SHANNON5000
Security patch: 2021-06-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... false
A system-as-root phone type was detected. If root is installed, then need to restart the phone in recovery mode. Continue? Yes
Rebooting phone to recovery mode... OK
Waiting for device to become ready... OK
Checking Super user right... true
Root version: 22.1:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.8

rai14 · 08-18-2021, 16:14

Code:

Operation: Read Codes via Server
Selected model: SM-A022F
Software version: 43.8

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A022F
Android version: 10
PDA version: A022FXXU2AUF1
CSC version: A022FOLM2AUF1
Phone version: A022FXXU2AUE2
Product code: SM-A022FZKDXME
CSC country code: MALAYSIA
CSC sales code: XME
Carrier ID: XME
Phone SN: RR8R505VXDM
IMEI: 359382695722685
HW version: MP 0.200
RF cal date: 20210520
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT,REGIONAL_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung modem... detected COM245
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 52747925
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 82702853
For check lock status: *#7465625#

Done with Samsung Tool PRO v.43.8

Luis_Miguel · 08-20-2021, 19:46

Code:

Operation: Repair
Selected model: SM-N975F
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-N975F
Android version: 11
PDA version: N975FXXU6ETLL
CSC version: N975FOWO6ETLL
Phone version: N975FXXU6ETLF
Product code: SM-N975FZKLARO
CSC country code: Argentina
CSC sales code: ARO
Carrier ID: ARO
Phone SN: RF8
IMEI: 358xxxxxxx
HW version: REV0.6
RF cal date: 20190731
Chip name: EXYNOS9825
Modem board: SHANNON5000
Security patch: 2020-12-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Root version: 23.0:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Reparing... OK
Done with Samsung Tool PRO v.43.8

Code:

Operation: Patch Certificate
Selected model: SM-N975F
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-N975F
Android version: 11
PDA version: N975FXXU6ETLL
CSC version: N975FOWO6ETLL
Phone version: N975FXXU6ETLF
Product code: SM-N975FZKLARO
CSC country code: Argentina
CSC sales code: ARO
Carrier ID: ARO
Phone SN: RF8
IMEI: 358xxxxxxx
HW version: REV0.6
RF cal date: 20190731
Chip name: EXYNOS9825
Modem board: SHANNON5000
Security patch: 2020-12-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Root version: 23.0:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.43.8

chipscell25 · 08-27-2021, 17:31

UNLOCK INSTRUCTIONS:
To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server [DIAG Jan 2021]
Selected model: SM-A307G
Software version: 43.8

Checking Login and Password... OK
Balance: 33 crd.
You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A307G
Android version: 9
PDA version: A307GUBS3ATB1
CSC version: A307GOWA3ATA2
Phone version: A307GDXS3ATB2
Product code: SM-A307GZKMCDR
CSC country code: Dominican Republic
CSC sales code: CDR
Carrier ID: CDR
Phone SN: RF8MB2TSMQJ
IMEI: 3526471xxxxxxxx
HW version: MP 0.1B0
RF cal date: 20191125
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2020-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM138
Searching server... OK
Checking server answer... OK
Reading data from phone... OK
Backuping diag data... OK
Executing... OK
Restoring diag data... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 90514246
NET lock: 20464280
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.43.8

bk.gsm · 09-01-2021, 16:01

Code:

[ 9/1/2021 5:47:00 PM ] Operation: Repair
[ 9/1/2021 5:47:00 PM ] Selected model: SM-A515F
[ 9/1/2021 5:47:00 PM ] Software version: 43.8
[ 9/1/2021 5:47:00 PM ] 
[ 9/1/2021 5:47:04 PM ] Waiting ADB device... OK
[ 9/1/2021 5:47:11 PM ] Reading phone info...
[ 9/1/2021 5:47:12 PM ] Model: SM-A515F
[ 9/1/2021 5:47:12 PM ] Android version: 11
[ 9/1/2021 5:47:12 PM ] PDA version: A515FXXU5EUG3
[ 9/1/2021 5:47:12 PM ] CSC version: A515FOXM5EUG2
[ 9/1/2021 5:47:12 PM ] Phone version: A515FXXU5EUG2
[ 9/1/2021 5:47:12 PM ] Product code: SM-A515FMSWSKZ
[ 9/1/2021 5:47:12 PM ] CSC country code: Kazakhstan
[ 9/1/2021 5:47:12 PM ] CSC sales code: SKZ
[ 9/1/2021 5:47:12 PM ] Carrier ID: SKZ
[ 9/1/2021 5:47:12 PM ] Phone SN: R5*******
[ 9/1/2021 5:47:12 PM ] IMEI: 354*********
[ 9/1/2021 5:47:12 PM ] HW version: MP 0.3E
[ 9/1/2021 5:47:12 PM ] RF cal date: 20200922
[ 9/1/2021 5:47:12 PM ] Chip name: EXYNOS9611
[ 9/1/2021 5:47:12 PM ] Modem board: SHANNON337
[ 9/1/2021 5:47:12 PM ] Security patch: 2021-07-01
[ 9/1/2021 5:47:12 PM ] Boot Warranty bit: 1
[ 9/1/2021 5:47:12 PM ] SIM State: LOADED,ABSENT
[ 9/1/2021 5:47:12 PM ] Checking Super user right... true
[ 9/1/2021 5:47:13 PM ] Root version: f822ca5b:MAGISKSU
[ 9/1/2021 5:47:13 PM ] Checking data... OK
[ 9/1/2021 5:47:13 PM ] Searching server... OK
[ 9/1/2021 5:47:15 PM ] Checking server answer... OK
[ 9/1/2021 5:47:16 PM ] Data preparation... OK
[ 9/1/2021 5:47:16 PM ] Initialization zTool... OK
[ 9/1/2021 5:47:17 PM ] Running zTool, please wait... OK
[ 9/1/2021 5:47:22 PM ] Executing 1st step... OK
[ 9/1/2021 5:48:36 PM ] Executing 2nd step... OK
[ 9/1/2021 5:48:48 PM ] Searching server... OK
[ 9/1/2021 5:48:49 PM ] Waiting for server answer... OK
[ 9/1/2021 5:48:51 PM ] Reparing... OK
[ 9/1/2021 5:48:53 PM ] Rebooting phone... OK
[ 9/1/2021 5:49:02 PM ] 
[ 9/1/2021 5:55:17 PM ] Operation: Patch Certificate
[ 9/1/2021 5:55:17 PM ] Selected model: SM-A515F
[ 9/1/2021 5:55:17 PM ] Software version: 43.8
[ 9/1/2021 5:55:17 PM ] 
[ 9/1/2021 5:55:21 PM ] Waiting ADB device... OK
[ 9/1/2021 5:55:22 PM ] Reading phone info...
[ 9/1/2021 5:55:22 PM ] Model: SM-A515F
[ 9/1/2021 5:55:22 PM ] Android version: 11
[ 9/1/2021 5:55:22 PM ] PDA version: A515FXXU5EUG3
[ 9/1/2021 5:55:22 PM ] CSC version: A515FOXM5EUG2
[ 9/1/2021 5:55:22 PM ] Phone version: A515FXXU5EUG2
[ 9/1/2021 5:55:23 PM ] Product code: SM-A515FMSWSKZ
[ 9/1/2021 5:55:23 PM ] CSC country code: Kazakhstan
[ 9/1/2021 5:55:23 PM ] CSC sales code: SKZ
[ 9/1/2021 5:55:23 PM ] Carrier ID: SKZ
[ 9/1/2021 5:55:23 PM ] Phone SN: R5********
[ 9/1/2021 5:55:23 PM ] IMEI: 3572**********
[ 9/1/2021 5:55:23 PM ] HW version: MP 0.3E
[ 9/1/2021 5:55:23 PM ] RF cal date: 20200922
[ 9/1/2021 5:55:23 PM ] Chip name: EXYNOS9611
[ 9/1/2021 5:55:23 PM ] Modem board: SHANNON337
[ 9/1/2021 5:55:23 PM ] Security patch: 2021-07-01
[ 9/1/2021 5:55:24 PM ] Boot Warranty bit: 1
[ 9/1/2021 5:55:24 PM ] SIM State: LOADED,ABSENT
[ 9/1/2021 5:55:24 PM ] Checking Super user right... true
[ 9/1/2021 5:55:24 PM ] Root version: f822ca5b:MAGISKSU
[ 9/1/2021 5:55:24 PM ] Checking data... OK
[ 9/1/2021 5:55:24 PM ] Searching server... OK
[ 9/1/2021 5:55:26 PM ] Checking server answer... OK
[ 9/1/2021 5:55:27 PM ] Data preparation... OK
[ 9/1/2021 5:55:27 PM ] Searching server... OK
[ 9/1/2021 5:55:29 PM ] Waiting for server answer... OK
[ 9/1/2021 5:55:30 PM ] Patching... OK
[ 9/1/2021 5:55:33 PM ] Rebooting phone... OK
[ 9/1/2021 5:55:42 PM ]

b.r.

Viaraja786 · 09-05-2021, 10:18

what a problem Z3X TEAM ???
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A013G
Software version: 43.8

Waiting ADB device... OK
Reading phone info...
Model: SM-A013G
Android version: 10
PDA version: A013GXXU4AUG5
CSC version: A013GOLO4AUG1
Phone version: A013GXXU4AUG1
Product code: SM-A013GZKDXXV
CSC country code: VIETNAM
CSC sales code: XXV
Carrier ID: KSA
Phone SN: R58N82N11AW
IMEI: 355???????????
HW version: REV0.2B
RF cal date: 20200814
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-07-01
SIM State: ABSENT,ABSENT
Searching server... OK
Checking server answer... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... error (2.)

Done with Samsung Tool PRO v.43.8

shahim24 · 09-07-2021, 10:37

Operation: Unlock SPR via Server NEW
Selected model: SM-N950U
Selected port: COM173 USB Serial Port
Software version: 43.8

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 8.0.0
PDA version: N950USQS5CSA1
CSC version: N950UOYN5CSA1
Phone version: N950USQS5CSA1
Product code: SM2N950UZKASPR
CSC country code: USA
CSC sales code: SPR
Carrier ID: SPR
Phone SN: R28JC01QW4X
IMEI: 35******
HW version: REV1.0
RF cal date: 2017.12.05
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2019-02-01
Boot Warranty bit: 0
SIM State: CARD_IO_ERROR
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Rebooting phone... OK
Done with Samsung Tool PRO v.43.8

08-13-2021, 13:42	#1801 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	A600A U5 Unlock done Operation: Unlock via Server DIAG May 2020 Selected model: SM-A600A Software version: 43.7 Checking Login and Password... OK Balance: 5 crd. You have 5 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A600A Android version: 9 PDA version: A600AUCS5BSI3 CSC version: A600AATT5BSI3 Phone version: A600AUCS5BSI3 Product code: CSC country code: USA CSC sales code: ATT Carrier ID: ATT Phone SN: RF8K9206CEN IMEI: 358485091xxxxxx HW version: REV0.1 RF cal date: 20180919 Chip name: EXYNOS7884 Modem board: SHANNON327 Security patch: 2019-09-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM400 Searching server... OK Checking server answer... OK Executing... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Unlocking... OK Unlock done Done with Samsung Tool PRO v.43.7

08-17-2021, 16:03	#1804 (permalink)
jrbravo No Life Poster Join Date: Mar 2016 Location: IN THE KERNEL Posts: 612 Member: 2545468 Status: Offline Thanks Meter: 234	Thanks Team.. Ulock Done J260T1 TMK !! Checking Login and Password... OK Balance: 15 crd. You have 15 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J260T1 Android version: 8.1.0 PDA version: J260T1UVS5ATD1 CSC version: J260T1TMK5ATD1 Phone version: J260T1UVS5ATD1 Product code: SM2J260TZKATMK CSC country code: USA CSC sales code: TMK Carrier ID: TMK Phone SN: RF8M538D90T IMEI: 356212103962628 HW version: REV1.0 RF cal date: 20190523 Chip name: EXYNOS7570 Modem board: SHANNON305 Security patch: 2020-04-01 Boot Warranty bit: 0 SIM State: SIM_SERVICE_PROVIDER_LOCKED Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM113 Searching server... OK Checking server answer... OK Executing... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.43.7

08-18-2021, 01:34	#1807 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	A105F U6 Patch Ok IMEI:NG but network ok Operation: Repair Jul 2021 Selected model: SM-A105F Software version: 43.8 Waiting ADB device... OK Reading phone info... Model: SM-A105F Android version: 10 PDA version: A105FDDU6BUD2 CSC version: A105FODM6BUD3 Phone version: A105FDDU6BUD2 Product code: SM-A105FZKGINS CSC country code: India CSC sales code: INS Carrier ID: INS Phone SN: RZ8M4037TKF IMEI: 3566501xxxxxxxx HW version: REV0.3 RF cal date: 20190401 Chip name: EXYNOS7884B Modem board: SHANNON327 Security patch: 2021-04-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... false A system-as-root phone type was detected. If root is installed, then need to restart the phone in recovery mode. Continue? Yes Rebooting phone to recovery mode... OK Waiting for device to become ready... OK Checking Super user right... true Root version: 3.19:EFTSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Initialization zTool... OK Running zTool, please wait... OK Executing 1st step... OK Executing 2nd step... OK Searching server... OK Waiting for server answer... OK Reparing... OK Rebooting phone... OK Done with Samsung Tool PRO v.43.8 Operation: Patch CERT Jul 2021 Selected model: SM-A105F Software version: 43.8 Waiting ADB device... OK Reading phone info... Model: SM-A105F Android version: 10 PDA version: A105FDDU6BUD2 CSC version: A105FODM6BUD3 Phone version: A105FDDU6BUD2 Product code: SM-A105FZKGINS CSC country code: India CSC sales code: INS Carrier ID: INS Phone SN: RZ8M4037TKF IMEI: 3566225400xxxxx HW version: REV0.3 RF cal date: 20190401 Chip name: EXYNOS7884B Modem board: SHANNON327 Security patch: 2021-04-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... true Root version: 3.19:EFTSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Searching server... OK Waiting for server answer... OK Patching... OK Rebooting phone... OK Done with Samsung Tool PRO v.43.8

08-18-2021, 14:11	#1809 (permalink)
jabbar butt Major Poster Join Date: Nov 2015 Location: Gujrat Age: 29 Posts: 44 Member: 2484556 Status: Offline Sonork: 100.1670147 Thanks Meter: 17	G970F u11 IMEI EPAIR AND PATCH DONE Waiting ADB device... OK Reading phone info... Model: SM-G970F Android version: 11 PDA version: G970FXXSBFUE6 CSC version: G970FOWOBFUE6 Phone version: G970FXXSBFUE6 Product code: SM-G970FZKDARO CSC country code: Argentina CSC sales code: ARO Carrier ID: KSA Phone SN: RF8M320PX9H IMEI: 3588800 HW version: MP 0.700 RF cal date: 20190315 Chip name: EXYNOS9820 Modem board: SHANNON5000 Security patch: 2021-06-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... false A system-as-root phone type was detected. If root is installed, then need to restart the phone in recovery mode. Continue? Yes Rebooting phone to recovery mode... OK Waiting for device to become ready... OK Checking Super user right... true Root version: 22.1:MAGISKSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Searching server... OK Waiting for server answer... OK Patching... OK Rebooting phone... OK Done with Samsung Tool PRO v.43.8

09-07-2021, 10:37	#1815 (permalink)
shahim24 Insane Poster Join Date: Aug 2017 Location: BD Posts: 67 Member: 2743523 Status: Offline Thanks Meter: 8	SM-N950U Sprint(SPR) Unlock Done Operation: Unlock SPR via Server NEW Selected model: SM-N950U Selected port: COM173 USB Serial Port Software version: 43.8 Checking Login and Password... OK Balance: 25 crd. You have 25 credit(s) left. This operation takes 10 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-N950U Android version: 8.0.0 PDA version: N950USQS5CSA1 CSC version: N950UOYN5CSA1 Phone version: N950USQS5CSA1 Product code: SM2N950UZKASPR CSC country code: USA CSC sales code: SPR Carrier ID: SPR Phone SN: R28JC01QW4X IMEI: 35****** HW version: REV1.0 RF cal date: 2017.12.05 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2019-02-01 Boot Warranty bit: 0 SIM State: CARD_IO_ERROR Waiting for device to become ready... OK Reading IMEI... OK Initialization zTool... OK Running zTool, please wait... OK Checking network lock status... LOCKED Reading data from phone... OK Searching server... OK Waiting for server answer... OK Writing data to phone... OK Checking network lock status... UNLOCKED Rebooting phone... OK Done with Samsung Tool PRO v.43.8

08-14-2021, 22:14	#1802 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,104 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 576	Operation: Unlock SPR via Server NEW Selected model: SM-A102U Software version: 43.7 Checking Login and Password... OK Balance: 21 crd. You have 21 credit(s) left. This operation takes 10 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A102U Android version: 9 PDA version: A102USQU8ATJ1 CSC version: A102UOYN8ATJ1 Phone version: A102USQU8ATJ1 Product code: SM2A102UZKDDSH CSC country code: USA CSC sales code: DSH Carrier ID: BST Phone SN: RF8N705PDHM IMEI: 358688106XXXXXX HW version: REV1.0 RF cal date: 20200701 Chip name: EXYNOS7884B Modem board: SHANNON327 Security patch: 2020-09-01 Boot Warranty bit: 0 SIM State: LOADED Waiting for device to become ready... OK Reading IMEI... OK Initialization zTool... OK Running zTool, please wait... OK Checking network lock status... LOCKED Reading data from phone... OK Searching server... OK Waiting for server answer... OK Writing data to phone... OK Checking network lock status... UNLOCKED Rebooting phone... OK Done with Samsung Tool PRO v.43.7

08-17-2021, 16:02	#1803 (permalink)
jrbravo No Life Poster Join Date: Mar 2016 Location: IN THE KERNEL Posts: 612 Member: 2545468 Status: Offline Thanks Meter: 234	Checking Login and Password... OK Balance: 15 crd. You have 15 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J260T1 Android version: 8.1.0 PDA version: J260T1UVS5ATD1 CSC version: J260T1TMK5ATD1 Phone version: J260T1UVS5ATD1 Product code: SM2J260TZKATMK CSC country code: USA CSC sales code: TMK Carrier ID: TMK Phone SN: RF8M538D90T IMEI: 356212103962628 HW version: REV1.0 RF cal date: 20190523 Chip name: EXYNOS7570 Modem board: SHANNON305 Security patch: 2020-04-01 Boot Warranty bit: 0 SIM State: SIM_SERVICE_PROVIDER_LOCKED Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM113 Searching server... OK Checking server answer... OK Executing... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.43.7

08-18-2021, 01:32	#1806 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Operation: Repair Jul 2021 Selected model: SM-A105F Software version: 43.8 Waiting ADB device... OK Reading phone info... Model: SM-A105F Android version: 10 PDA version: A105FDDU6BUD2 CSC version: A105FODM6BUD3 Phone version: A105FDDU6BUD2 Product code: SM-A105FZKGINS CSC country code: India CSC sales code: INS Carrier ID: INS Phone SN: RZ8M4037TKF IMEI: 3566501xxxxxxxx HW version: REV0.3 RF cal date: 20190401 Chip name: EXYNOS7884B Modem board: SHANNON327 Security patch: 2021-04-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... false A system-as-root phone type was detected. If root is installed, then need to restart the phone in recovery mode. Continue? Yes Rebooting phone to recovery mode... OK Waiting for device to become ready... OK Checking Super user right... true Root version: 3.19:EFTSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Initialization zTool... OK Running zTool, please wait... OK Executing 1st step... OK Executing 2nd step... OK Searching server... OK Waiting for server answer... OK Reparing... OK Rebooting phone... OK Done with Samsung Tool PRO v.43.8 Operation: Patch CERT Jul 2021 Selected model: SM-A105F Software version: 43.8 Waiting ADB device... OK Reading phone info... Model: SM-A105F Android version: 10 PDA version: A105FDDU6BUD2 CSC version: A105FODM6BUD3 Phone version: A105FDDU6BUD2 Product code: SM-A105FZKGINS CSC country code: India CSC sales code: INS Carrier ID: INS Phone SN: RZ8M4037TKF IMEI: 3566225400xxxxx HW version: REV0.3 RF cal date: 20190401 Chip name: EXYNOS7884B Modem board: SHANNON327 Security patch: 2021-04-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... true Root version: 3.19:EFTSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Searching server... OK Waiting for server answer... OK Patching... OK Rebooting phone... OK Done with Samsung Tool PRO v.43.8

08-18-2021, 10:04	#1808 (permalink)
gsmhosting97 Junior Member Join Date: Jul 2021 Location: Pakistan Age: 26 Posts: 15 Member: 2993429 Status: Offline Thanks Meter: 2	Samsung Galaxy J7 SM-J700F U4 Logo Stuck Boot Fix Done 100% \|\| Z3x Box https://*********/CrP2wFLNt-w FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. If you have PIT file chosen, then you must check 'Repartition' option. 3. Check flashing options if needed (Repartition, EFS clear, Boot update). 4. Power on the phone in download mode (turn off phone, press vol.down + home + power). 5. Connect the phone to PC with USB cable, install drivers if needed. 6. Press 'Flash' button. Operation: Flash Selected model: SM-J700F Software version: 43.8 File analysis... OK Total file size: 0x7A976D60 (1961 Mb) Searching USB Flash interface... COM24 detected Setup connection... OK Reading PIT from phone... OK Sending sboot.bin... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Flashing done (time - 00:01:58) Done with Samsung Tool PRO v.43.8 100% Flash Done Without Any Risk With Z3x Box

08-27-2021, 17:31	#1812 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,104 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 576	UNLOCK INSTRUCTIONS: To read security codes using sever: Knox warranty does not matter. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server [DIAG Jan 2021] Selected model: SM-A307G Software version: 43.8 Checking Login and Password... OK Balance: 33 crd. You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A307G Android version: 9 PDA version: A307GUBS3ATB1 CSC version: A307GOWA3ATA2 Phone version: A307GDXS3ATB2 Product code: SM-A307GZKMCDR CSC country code: Dominican Republic CSC sales code: CDR Carrier ID: CDR Phone SN: RF8MB2TSMQJ IMEI: 3526471xxxxxxxx HW version: MP 0.1B0 RF cal date: 20191125 Chip name: EXYNOS7904 Modem board: SHANNON327 Security patch: 2020-02-01 Boot Warranty bit: 0 SIM State: ABSENT Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM138 Searching server... OK Checking server answer... OK Reading data from phone... OK Backuping diag data... OK Executing... OK Restoring diag data... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 90514246 NET lock: 20464280 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.43.8

09-05-2021, 10:18	#1814 (permalink)
Viaraja786 Freak Poster Join Date: Jan 2016 Location: faisalabad Age: 41 Posts: 116 Member: 2518014 Status: Offline Thanks Meter: 43	what a problem Z3X TEAM ??? REPAIR INSTRUCTIONS: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Reboot to...' button and select mode to reboot (download or recovery). Operation: Repair Selected model: SM-A013G Software version: 43.8 Waiting ADB device... OK Reading phone info... Model: SM-A013G Android version: 10 PDA version: A013GXXU4AUG5 CSC version: A013GOLO4AUG1 Phone version: A013GXXU4AUG1 Product code: SM-A013GZKDXXV CSC country code: VIETNAM CSC sales code: XXV Carrier ID: KSA Phone SN: R58N82N11AW IMEI: 355??????????? HW version: REV0.2B RF cal date: 20200814 Chip name: MT6739 Modem board: MT6739 Security patch: 2021-07-01 SIM State: ABSENT,ABSENT Searching server... OK Checking server answer... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... error (2.) Done with Samsung Tool PRO v.43.8