Post here successfully job with Z3X-BOX Samsung (2010-2018)

[ferouz kassim]

Operation: Unlock
Selected model: SGH-M150
Selected port: COM192 Z3X BOX Serial Port, 460800
Software version: 29.0

Connect phone and press power button... Phone detected
Switching phone to TAT mode... OK
Reading phone info... OK
Phone version: M150AXIA3
IMEI: 35464002213065
Phone SN: R7XS109647
Phone BT: 00:237:7B:FF:83
Reading security... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.0

[orhan5]

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.

To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.

Operation: Read EFS
Selected model: SM-E500H
Selected port: COM3 USB Serial Port
Software version: 29.0

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-E500H
Android version: 5.1.1
Product code: SM-E500HZKATUR
Phone version: E500HXXU1BOI5
PDA version: E500HXXU1BPK1
CSC version: E500HOJV1BPJ3
CSC country code: TURKEY
CSC sales code: TUR
HW version: MP 0.800
Phone SN: RV1G51M6Z7T
Modem board: MSM8216
Security patch: 2016-11-01
RF cal date: 2015.05.22
IMEI:
Checking Super user right... true
Reading EFS from phone... OK
Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungToolPRO\backup\EFS\EFS_SM-E500H_E500HXXU1BPK1__RV1G51M6Z7T_12-8-2017_1-31-2.tar

Done with Samsung Tool PRO v.29.0

[gracy_elec]

Successfully REMOVE USER CODE(SAMSUNG S3353)USB

Selected model: S3353
Selected com port: COM39
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Phone IMEI: 35597704388564/00
Phone SN: RDKB429504
Phone SN: S3353DDKC1
Phone user code: 8888
Read user code - ok
Elapsed time: 3 second, sw ver: 3.5.0040

THANKS Z3X-BOX TEAM

[ferouz kassim]

Operation: Flash
Selected model: GT-S3572
Software version: 29.0

Load model info... OK
Loading BIN PTT file... OK
Loading CSC PTT file... OK
Reconnect battery and connect phone to USB cable
Phone detected
Checking device descriptions... OK
Link type set to USBF
Reading OTP... OK
OTP register: 473E8100
PKI security mode detected
Protected device detected
Reading product ID... OK
Product ID: 0x 0 6502018E8E4 0
Reading SCROM version
SCROM version - 0x 31
Chipset version - 0x 48
Downloading Loader of main loader in Internal RAM... OK
Start PreLoader... OK
Wait for device... OK
Checking device descriptions... OK
Loader verison... 7.5.16
Uploading INT loader to S/D-DRAM Interface...
DDRAM detected
Flash memory parameters
Capacity params: 0 Datawidth - 0 Block number - 0 Block size - 0 Buffer prog.
Timing params: 0 ms erase block time - 0 us write buffer time
Loader parameters
Write Test flash params: 0x0 Test Address - 0 Test size
Buffer params: 5 Buffer type - 1024 Buffer size - 1024 Tansfert size - 0 Tansfert RAW size
Bad Block params: 0 Bad block reservoir size
Wait for device... OK
Checking device descriptions... OK
Loader verison... 7.5.16
NAND flash memory SSG_K521F12ACH-B050 detected
Flash memory parameters
Capacity params: 1 Datawidth - 1024 Block number - 128 Block size - 0 Buffer prog.
Timing params: 6 ms erase block time - 600 us write buffer time
Send Loader and NAND Flash Parameters...
Loader parameters
Write Test flash params: 0x0 Test Address - 0 Test size
Buffer params: 3 Buffer type - 66958336 Buffer size - 32768 Tansfert size - 32768 Tansfert RAW size
Bad Block params: 22 Bad block reservoir size
SW Boot version: 5
Get First Block... OK
Prepare FirstBlock... OK
FirstBlock Must Be updated
Erase First Block... OK
Set Partition Params... OK
Downloading FirstBlock in Flash... OK
Init Bad Block Managment... OK
Send Verify Cmd... OK
Erasing Partition_1... OK
Erasing Partition_2... OK
Erasing Partition_3... OK
Erasing Partition_4... OK
Erasing Partition_5... OK
Erasing Partition_6... OK
Erasing Partition_7... OK
Erasing Partition_8... OK
Erasing Partition_9... OK
Erasing Partition_10... OK
Erasing Partition_12... OK
Programming Partition_1
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_1 IMAGE... OK
Checking CRC32... OK
Programming Partition_2
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_2 LCDACT... OK
Checking CRC32... OK
Programming Partition_3
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_3 DATA_RW... OK
Checking CRC32... OK
Programming Partition_4
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_4 DSP... OK
Checking CRC32... OK
Programming Partition_5
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_5 PAGE... OK
Checking CRC32... OK
Programming Partition_6
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_6 MAIN... OK
Checking CRC32... OK
Programming Partition_7
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_7 a... OK
Checking CRC32... OK
Programming Partition_8
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_8 b... OK
Checking CRC32... OK
Programming Partition_9
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_9 c... OK
Checking CRC32... OK
Programming Partition_10
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_10 d... OK
Checking CRC32... OK
Programming Partition_12
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_12 OTPW... OK
Checking CRC32... OK
Updating RCB... OK
Flashing done (time - 00:04:27)

Done with Samsung Tool PRO v.29.0

[gracy_elec]

Successfully REMOVE FRP (SAMSUNG SM-J200F)USB

Operation: Reset FRP/React/EE
Selected model: SM-J200F
Software version: 29.0

Searching Samsung USB Flash interface... COM40 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.0

THANKS Z3X-BOX TEAM

[Tanha0321]

Operation: Reset FRP
Selected model: SM-G532F
Software version: 29.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
Product code: SM-G532FZDDKSA
Phone version: G532FXXU1APJ7
PDA version: G532FXWU1APJ3
CSC version: G532FOJV1APJ4
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.300
Phone SN: R58J13S48YZ
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2016-10-01
RF cal date: 20170117
IMEI: 
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.0

[Tanha0321]

Operation: Reset FRP/React/EE
Selected model: SM-J500H
Software version: 29.0

Searching Samsung USB Flash interface... COM31 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.0

[orhan5]

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on phone in download mode (turn off phone, press vol.down + home + power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Unlock
Selected model: SM-J700H/DS
Software version: 28.2

Searching Samsung modem... detected COM201
Reading phone info... Ok
Model:
AP version:
CSC version:
CP version:
Product code:
Phone SN:
Unique number:
Reading IMEI... Ok
IMEI: 358571038623441 (SIGN: NG_SIGN)
IMEI 2: 358571038623458 (SIGN: NG_SIGN)
Reading data from phone... Ok
Unlocking... Ok
Rebooting phone... Ok
Unlock done

Done with Samsung Tool PRO v.28.2

[orhan5]

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on phone in download mode (turn off phone, press vol.down + home + power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Unlock
Selected model: SM-J700H/DS
Software version: 28.2

Searching Samsung modem... detected COM201
Reading phone info... Ok
Model:
AP version:
CSC version:
CP version:
Product code:
Phone SN:
Unique number:
Reading IMEI... Ok
IMEI: 358571038623441 (SIGN: NG_SIGN)
IMEI 2: 358571038623458 (SIGN: NG_SIGN)
Reading data from phone... Ok
Unlocking... Ok
Rebooting phone... Ok
Unlock done

Done with Samsung Tool PRO v.28.2

[orhan5]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Operation: Patch Certificate
Selected model: SM-J700H/DS
Software version: 28.2

Waiting ADB device... Ok
Reading phone info...
Model: SM-J700H
Android version: 6.0.1
Product code: SM-J700HZDDMID
Phone version: J700HXXU3AQD1
PDA version: J700HXXS3BQE2
CSC version:
CSC country code:
CSC sales code:
HW version: MP 0.400
Phone SN: R21H60JTWNR
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-05-01
RF cal date: 20160617
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Reading data... Ok
Detecting MODEM... Ok
Reading MODEM... Ok
Calculating... Ok
Writing zTool... Ok
Initialization zTool... Ok
Rebooting phone... Ok
Patching CERT check... done

Done with Samsung Tool PRO v.28.2

[orhan5]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Repair
Selected model: SM-J710F
Software version: 29.0

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
Product code: SM-J710FZDDSER
Phone version: J710FXXU2AQA4
PDA version: J710FXXU2AQA8
CSC version: J710FOXY2AQA2
CSC country code: Russia
CSC sales code: SER
HW version: MP 0.400
Phone SN: RF8J21SEEXD
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-01-01
RF cal date: 20170216
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 36 04 00 00 00 00 00 00 00 00 00 00 26 CF 96 0E
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.29.0

[orhan5]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Patch Certificate
Selected model: SM-J710F
Software version: 29.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
Product code: SM-J710FZDDSER
Phone version: J710FXXU2AQA4
PDA version: J710FXXU2AQA8
CSC version: J710FOXY2AQA2
CSC country code: Russia
CSC sales code: SER
HW version: MP 0.400
Phone SN: RF8J21SEEXD
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-01-01
RF cal date: 20170216
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.29.0

[saeedarashj]

Searching Samsung modem... detected COM5
Reading phone info... OK
Model: SM-G955F
AP version: G955FXXU1AQG5
CSC version: G955FOXM1AQG5
CP version: G955FXXU1AQG5
Product code: ATO
Phone SN: R5xxxxxxxGW
Unique number: CE051715AAEBBB2202
Reading IMEI... OK
IMEI: 359xxxxxxxxxx23
Reading SN... OK
Phone SN: R5xxxxxFG
Enter MSL: 0519330xxxxxxxxxxxxxxxxxxxx212C00
Bypass MSL... OK
Unlocking... OK
Codes set to 00000000
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.29.0

[GSM SKILS]

g925t unlock done


Operation: Unlock
Selected model: SM-G925T
Selected port: COM15 USB Serial Port
Software version: 29.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G925T
Android version: 7.0
Product code: SM-G925TZKATMB
Phone version: G925TUVU5FQG3
PDA version: G925TUVU5FQG3
CSC version: G925TTMB5FQG3
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone SN: R58G60FNWJL
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-07-01
RF cal date: 20150606
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 08 FF CE 0F 37 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.0

[samsu143]

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Unlock
Selected model: SM-J200F
Software version: 29.1

Waiting ADB device... OK
Reading phone info...
Model: SM-J200F
Android version: 5.1.1
Product code: SM-J200FZDDKSA
Phone version: J200FXXU3AQC1
PDA version: J200FXXU3AQC2
CSC version: J200FOJV3AQC1
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.300
Phone SN: RV8J5283SCM
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-03-01
RF cal date: 20170601
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 82 B3 75 5F 14 DD 27 78 B9 9F 0E A2 00 54 B2 55
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.1